Software

29.01.2025

15:01 Mainswitch Feature #608 (Neu): Shutdown command

CANDis should have some button to shutdown mainswitch.
There will be a flash.
So it has to be a multicast shutdown-... Maximilian Seesslen

14:50 Mainswitch Fehler #606 (Erledigt): Mainswitch bootloader does not fit into flash using TCB 1.6.7

Maximilian Seesslen

27.01.2025

14:05 Kokon Fehler #607 (Neu): Check moveInterrupVectorTable; still using hardcoded 0xC0 entries?

Would be bad. Maximilian Seesslen

13:29 Mainswitch Fehler #606 (Erledigt): Mainswitch bootloader does not fit into flash using TCB 1.6.7

12 Bytes missing ;)
Hopefully some periphery can be removed from bootloader via "variant" feature.
Maximilian Seesslen

13:03 Campo Feature #589 (Abgewiesen): Add script to find devices with obsolete firmware

I'm happy when flashing is working. Maximilian Seesslen

11:07 Campo Feature #598 (Erledigt): CS2025.01

Maximilian Seesslen

11:06 Cordyceps Feature #518 (Erledigt): Implement message server/client architecture

Maximilian Seesslen

11:04 Cordyceps Feature #520 (Erledigt): Implement canserver/CAN-Gateway

Maximilian Seesslen

11:04 Cordyceps Feature #604 (Abgewiesen): Flash firmware automatically

I'm happy when the scripts work. Maximilian Seesslen

26.01.2025

17:45 Kokon Feature #597 (Erledigt): Support second bootloader for flashing first bootloader

Implemented. Maximilian Seesslen

17:44 libtdt Fehler #605 (Erledigt): MMP communication with >2 nodes

It was an STM32F103 with not very precise internal OSC. Maximilian Seesslen

17:43 Biwak Feature #572 (Erledigt): Linker script: add ram area for vector table

Maximilian Seesslen

17:42 Biwak Fehler #596 (Abgewiesen): Device freezes on high CAN traffic

Not valid any more. Maximilian Seesslen

24.01.2025

11:35 libtdt Fehler #605 (Erledigt): MMP communication with >2 nodes

Klappt einfach nicht.
Ein nicht-toleranter Modus sollte implementiert werden der bei PProblemen sofort abbricht und ... Maximilian Seesslen

23.01.2025

16:17 Cordyceps Feature #604 (Abgewiesen): Flash firmware automatically

Not sure if this is usable.
Maximilian Seesslen

22.01.2025

14:53 Cordyceps Feature #599 (Erledigt): Sort nodes in node view

Maximilian Seesslen

10:49 libcampo Feature #603 (Neu): Vagus: CAN: use filters

When flashing firmware to a device, everything gets quite busy.
This can be avoided by using filters.
* Allow all m... Maximilian Seesslen

21.01.2025

16:04 CANSwitch Feature #498 (Abgewiesen): Write testing framework based on events for host PC

Testing software on PC directly is much nicer.
Maximilian Seesslen

15:54 CANSwitch Test #487 (Erledigt): Fading working

Maximilian Seesslen

15:53 CANSwitch Feature #562 (Erledigt): Binary size to big

Works well at the moment. Maximilian Seesslen

15:51 CANSwitch Fehler #602 (Neu): Media is not switched off

Is the fader active, so with delay of 20 Seconds?
Maximilian Seesslen

15:50 CANSwitch Test #485 (Erledigt): Timeout

Maximilian Seesslen

17.01.2025

13:29 Cordyceps Feature #599 (Erledigt): Sort nodes in node view

The objects of nodes are already sorted.
When the nodes are also sorted, the nodes will always be at the same positi... Maximilian Seesslen

16.01.2025

18:44 Campo Feature #598 (Erledigt): CS2025.01

Maximilian Seesslen

18:26 Kokon Feature #597 (In Bearbeitung): Support second bootloader for flashing first bootloader

Maximilian Seesslen

18:16 Kokon Feature #597 (Erledigt): Support second bootloader for flashing first bootloader

Would be nice to be able to flash bootloader. For this a second bootloader has to be flashed at the application area.... Maximilian Seesslen

17:56 Biwak Fehler #596 (Abgewiesen): Device freezes on high CAN traffic

When flashing (other) device, mainswitch freezes.
Sending an error is problematic.
Send error only on error-transit... Maximilian Seesslen

15.01.2025

15:12 Kokon Feature #595 (Neu): Check board id and revision before flashing

This can be checked in flasher tool or on the devcice.
Where to keept the information for firmware files.
Database ... Maximilian Seesslen

11:05 Cordyceps Fehler #592 (Erledigt): Dont show MMP messages in nodes tree

Maximilian Seesslen