Redmine

19.02.2026

16:42 liblepto Feature #732 (Neu): Implement postphoned signal

Same mechanism as signal pool.
E.g. Pressing an button must not directly emit an signal. Signal has to be postphon... Maximilian Seesslen

05.02.2026

18:48 Helios Fehler #729 (Neu): On button press when alarm is running, device switches to normal run mode

Device should switch off.
When recreating it directly, everything works as expected. Need some logs. Maximilian Seesslen

18:46 Helios Fehler #721 (Erledigt): Interrupt inactive when device is started

Maximilian Seesslen

02.02.2026

13:03 Bamboo Feature #728 (Neu): Test magic keys

Ich muesste Kupferklebeband haben. Einfach testen. Maximilian Seesslen

24.01.2026

16:41 ESP32 Fehler #725: [SN1] Enable pin pulled low

C5 caused an shortcut. Maximilian Seesslen

23.01.2026

20:06 ESP32 Fehler #725 (Neu): [SN1] Enable pin pulled low

Enable->GND: 0,2 Ohm, open on unsoldered PCB
Maximilian Seesslen