Software

13.09.2024

21:44 Biwak Revision 62d20aee (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

21:44 Biwak Revision 47fb3295 (libbiwak3): log: adjust layout for longer filename length

Redmine Admin

20:23 Biwak Revision b1094136 (libbiwak3): draft

Redmine Admin

20:23 Biwak Revision 61c473e8 (libbiwak3): option_bytes: fixed compiling for stm32g4

Redmine Admin

20:23 Biwak Revision 5ed4ffec (libbiwak3): cmake: use use_common_config_headers()

Redmine Admin

12.09.2024

21:01 Biwak Revision ed45bae6 (libbiwak3): cmake: check variable COMMON_CONFIG_HEADER instead of checking campo folder

"campo" is specific. Redmine Admin

12:01 Biwak Revision d90afeca (libbiwak3): cmake: look for config/config.h directly

Redmine Admin

11.09.2024

21:03 Biwak Revision 810f535e (libbiwak3): log: fixed showing the log category

Redmine Admin

21:03 Biwak Revision 892ad91b (libbiwak3): CFlashI2c::dump(): show address width

Redmine Admin

21:02 Biwak Revision 3f11fe9b (libbiwak3): added LED blink mode for bootloader

Redmine Admin

21:01 Biwak Revision fc9711e0 (libbiwak3): added CI2cSlave::getBus()

Redmine Admin

21:01 Biwak Revision 5e691b62 (libbiwak3): cmake: evaluate BIWAK_CONFIG

BIWAK_CONFIG can provide an project wide header for configuration
defines.
Every compile unit will automatically incl... Redmine Admin

20:59 Biwak Revision 2a9ab208 (libbiwak3): added linker_script.h

This provides access to symbols which are set in linker script Redmine Admin

20:58 Biwak Revision 77adbdc7 (libbiwak3): added support for stm32 option bytes

Redmine Admin

20:58 Biwak Revision b5a51dd7 (libbiwak3): cmake: fixed formating

Redmine Admin

20:43 libcampo Feature #564 (Erledigt): config-header: use nice macros to check for features

Maximilian Seesslen

20:29 libcampo Feature #565 (Erledigt): config description

Maximilian Seesslen

13:31 libcampo Feature #565: config description

... Maximilian Seesslen

10.09.2024

15:40 libcampo Feature #565 (Erledigt): config description

VAGUS_USE_UID
Support for biwak UID. NMT can change NodeID by UID. CollectHwData can store it so production data ... Maximilian Seesslen

15:00 libcampo Feature #564 (Erledigt): config-header: use nice macros to check for features

... Maximilian Seesslen

09.09.2024

14:13 libcampo Feature #563 (Erledigt): Remove template-feature from vagus

See wiki for descriptions.
Library should work with project-config-header instead of magically perdefines and pre-de... Maximilian Seesslen

08.09.2024

08:58 Biwak Revision e720ff52 (libbiwak3): draft

Redmine Admin

08:58 Biwak Revision 70160256 (libbiwak3): adjusted log output

Redmine Admin

07.09.2024

22:24 Biwak Revision 95f2796b (libbiwak3): log: merge event and category to shrink binary size

Redmine Admin

22:21 Biwak Revision 57d81aaf (libbiwak3): size shrink and cleanup

Redmine Admin

06.09.2024

11:44 CANSwitch Feature #562 (Erledigt): Binary size to big

I had to disable UART to get it compile.
Maximilian Seesslen

05.09.2024

21:17 Biwak Revision 34b938e4 (libbiwak3): log: fixed compiling tests

Redmine Admin

19:05 Biwak Revision 6b83050f (libbiwak3): log: fixed testing with LEPTO_LOG_USE_PRETTY_PRINT not set

Redmine Admin

15:38 Biwak Revision dad0cef1 (libbiwak3): flash: use default page sizes 1 to pass the tests

Maximilian Seesslen

11:51 Biwak Revision bd0ad231 (libbiwak3): uart: .AdvFeatureInit in UART_HandleTypeDef is optional for some devices

Maximilian Seesslen

09:22 Biwak Revision c0da3254 (libbiwak3): draft

Redmine Admin

03.09.2024

20:56 Biwak Revision 81e9a60f (libbiwak3): updated changelog for v2.8.1

Redmine Admin

31.08.2024

16:06 Biwak Revision bcc4b354 (libbiwak3): cleanup

Redmine Admin

14:30 Biwak Revision 2cde3dd2 (libbiwak3): cleanup

Redmine Admin

13:58 Biwak Revision d8dc37bc (libbiwak3): spi: fixed switch statement

Redmine Admin

13:54 Biwak Revision 30352200 (libbiwak3): retain: initialize counters with zeros

Redmine Admin

13:53 Biwak Revision 2ea3115c (libbiwak3): increased log entries when LEPTO_LOG_USE_PRETTY_PRINT is set

Redmine Admin

13:51 Biwak Revision 4a5c1f5d (libbiwak3): drawCircleBlock: support unfilled circles

This does not work well. Pixels are missing.
Unfilled circles should be drawn with drawCircleHBlock(). Redmine Admin

13:50 Biwak Revision a7ee2a40 (libbiwak3): cosmetics

Redmine Admin

13:49 Biwak Revision 487ed921 (libbiwak3): flash_spi: reduced retries

Redmine Admin

13:49 Biwak Revision e6197caa (libbiwak3): draft

Redmine Admin

13:48 Biwak Revision 3c5412cd (libbiwak3): adopted spi changes

Redmine Admin

13:47 Biwak Revision fe60bc7f (libbiwak3): ili9341: use CSpiSlave as base for controlling chip select

Redmine Admin

13:44 Biwak Revision 87a6190c (libbiwak3): spi: supprt nested chip select

Avoid unnecessary CS-toggling. Redmine Admin

13:43 Biwak Revision b9061047 (libbiwak3): spi: cleanup code

Unified methods; got rid of writeData24 etc.
Take care about endisness convertion. Redmine Admin

30.08.2024

10:18 CANDis Fehler #558: Reading touch calibration is very unreliable

Before closing this defect, check if the status of SPI HAL command is "OK". Add result as a comment in the code.
Maximilian Seesslen

10:15 CANDis Fehler #558: Reading touch calibration is very unreliable

The initial reading of JDEC-ID does not work and so the erase-page-size is the default 8.
Does the default value m... Maximilian Seesslen

29.08.2024

20:58 Biwak Revision 535f43e7 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

20:58 Biwak Revision 4f2ecad1 (libbiwak3): CFlashSpi::io_wr: return status

Redmine Admin

20:56 Biwak Revision 91874925 (libbiwak3): [#558] added reties if the jedec id could not be read at start

The page-erase size is determined at start. If the JDEC-Id could not be
read at start, CRetain will make nonsense.
T... Redmine Admin

10:28 CANDis Fehler #558: Reading touch calibration is very unreliable

The retain-header address is different. No delays needed. Maximilian Seesslen

09:53 CANDis Fehler #558: Reading touch calibration is very unreliable

When device is ok, a soft-reset can not reproduce the problem.
When device is ok, a warm-reset via reset-button can ... Maximilian Seesslen

28.08.2024

18:21 CANDis Feature #560 (Erledigt): Create library versions

Maximilian Seesslen

18:18 CANDis Fehler #559 (Abgewiesen): When adding item to Minutnik, artifacts from Minutnik-Screen are seen on the items screen

Maximilian Seesslen

11:00 CANDis Fehler #558 (Neu): Reading touch calibration is very unreliable

No idea whats going on here.
Devices are not really usable.
Write a loop, make retain-code verbose.
Maximilian Seesslen

10:57 CANDis Feature #556 (Erledigt): move button slots to screen implementations

Maximilian Seesslen

09:56 Biwak Revision d4297134 (libbiwak3): gdisplay_ili9341: fixed drawing single pixels

Redmine Admin

27.08.2024

22:41 CANDis Fehler #557 (Neu): When switchin from "minutnik running items" to clock, background of letters are violet

Probably the background is just not set correctly. Maximilian Seesslen

20:23 Biwak Revision d3ded16e (libbiwak3): added some dummy methods for timer for x86

Redmine Admin

17:26 CANDis Feature #556 (Erledigt): move button slots to screen implementations

The CCanDis implementation is quite large, 858 lines of code.
Minutnik-implementation in the main CCanDis file is ... Maximilian Seesslen

17:24 CANDis Fehler #554 (Erledigt): Touch calibration needed

Maximilian Seesslen

17:24 Biwak Revision 287114af (libbiwak3): fixed building with Qt5

Maximilian Seesslen

14:41 CANDis Fehler #555 (Erledigt): RTC is not working on any device any more

Reconstruction of vagus was the problem.
digestWriteObject() of candis was not called for date/time.
Maximilian Seesslen

09:29 Biwak Revision 14984deb (libbiwak3): cleanup

Redmine Admin

26.08.2024

11:03 CANDis Fehler #555 (Erledigt): RTC is not working on any device any more

Even when setting the time via cordyceps, the time is set to 0 afteer the RTC-Sync.
This should not happen even if t... Maximilian Seesslen

09:57 Biwak Revision 3c7f3c3b (libbiwak3): fixed header

Redmine Admin

24.08.2024

17:20 CANDis Fehler #554 (Erledigt): Touch calibration needed

Calibration values are hardcoded at the moment.
At least one device does not work very good with this values.
The... Maximilian Seesslen

23.08.2024

13:23 CANHub Feature #553 (Neu): implement monitor mode

Implement an monitor class that shows an list of connections.
The server class can emit an "updated" event after new... Maximilian Seesslen

20.08.2024

20:47 CANHub Feature #551 (Erledigt): Move "CConnectors" to namespace "CANHub"

Maximilian Seesslen

20:42 CANHub Feature #545 (Erledigt): Implement reconnection of connectors

Maximilian Seesslen

20:41 CANHub Feature #543 (Erledigt): Rename CANServer to CANHub

Maximilian Seesslen

20:40 CANHub Feature #539 (Erledigt): implement unit tests

Maximilian Seesslen

20:35 CANHub Feature #538 (Erledigt): Finalize CANDump

Maximilian Seesslen

14:57 CANHub Feature #552 (Neu): Implement Heartbeat

For Loop detection an heartbeat should be generated periodically.
It is send to all TCP connectors, not physical CAN... Maximilian Seesslen

14:41 TDTPrompt Feature #542 (Erledigt): Build up UI according to XML file

Maximilian Seesslen

14:41 TDTPrompt Feature #548 (Erledigt): Integrate CANHub

Maximilian Seesslen

16.08.2024

19:48 CANHub Feature #551 (Erledigt): Move "CConnectors" to namespace "CANHub"

Maximilian Seesslen

19:46 CANHub Feature #549 (Erledigt): unit tests: inherit from connector classes

Maximilian Seesslen

15.08.2024

16:45 TDTPrompt Feature #550 (Neu): Show CANHub connector status on status bar

This has to be implemented in CANHub first.
Messages per minute would be interesting. Steal it from cordyceps.
Th... Maximilian Seesslen

16:35 CANHub Feature #549 (Erledigt): unit tests: inherit from connector classes

Dont aggregate.
Maximilian Seesslen

16:25 TDTPrompt Feature #548 (Erledigt): Integrate CANHub

I want to see actual data.
Maximilian Seesslen

16:12 CANHub Feature #547 (Neu): Loop detection

A server can send an ID message periodically. The ID is generated by libuuid.
If an server receives its own ID, a lo... Maximilian Seesslen

16:01 CANHub Feature #546 (Neu): multiple servers

Scenario:
connect CAN-segments via CAN.
i.MX6 with CAN connects with other device with USB dongle.
Maximilian Seesslen

15:34 CANHub Feature #545 (Erledigt): Implement reconnection of connectors

When the client PC was on standby and gets woken up, i assume the application just quits.
This will be anoying when ... Maximilian Seesslen

15:23 CANHub Fehler #544 (Neu): Connectors: tolerate wrong sizes

When PC is woken up from standby, the received size is a random number.
Check if this is tolerated when receiving.
Maximilian Seesslen

15:16 CANHub Feature #543 (Erledigt): Rename CANServer to CANHub

This naming is more distinct.
CANHub provides
* libCANHub
* CANServer
* CAN-Connectors
* TCP-Connectors
* CANDu... Maximilian Seesslen