Aktivität

von 07.08.2024 bis 05.09.2024

10:18 CANDis Fehler #558: Reading touch calibration is very unreliable: Before closing this defect, check if the status of SPI HAL command is "OK". Add result as a comment in the code.
Maximilian Seesslen
10:15 CANDis Fehler #558: Reading touch calibration is very unreliable: The initial reading of JDEC-ID does not work and so the erase-page-size is the default 8.
Does the default value m... Maximilian Seesslen

10:28 CANDis Fehler #558: Reading touch calibration is very unreliable: The retain-header address is different. No delays needed. Maximilian Seesslen
09:53 CANDis Fehler #558: Reading touch calibration is very unreliable: When device is ok, a soft-reset can not reproduce the problem.
When device is ok, a warm-reset via reset-button can ... Maximilian Seesslen

18:21 CANDis Feature #560 (Erledigt): Create library versions: Maximilian Seesslen
18:18 CANDis Fehler #559 (Abgewiesen): When adding item to Minutnik, artifacts from Minutnik-Screen are seen on the items screen: Maximilian Seesslen
11:00 CANDis Fehler #558 (Neu): Reading touch calibration is very unreliable: No idea whats going on here.
Devices are not really usable.
Write a loop, make retain-code verbose.
Maximilian Seesslen
10:57 CANDis Feature #556 (Erledigt): move button slots to screen implementations: Maximilian Seesslen

22:41 CANDis Fehler #557 (Neu): When switchin from "minutnik running items" to clock, background of letters are violet: Probably the background is just not set correctly. Maximilian Seesslen
17:26 CANDis Feature #556 (Erledigt): move button slots to screen implementations: The CCanDis implementation is quite large, 858 lines of code.
Minutnik-implementation in the main CCanDis file is ... Maximilian Seesslen
17:24 CANDis Fehler #554 (Erledigt): Touch calibration needed: Maximilian Seesslen
14:41 CANDis Fehler #555 (Erledigt): RTC is not working on any device any more: Reconstruction of vagus was the problem.
digestWriteObject() of candis was not called for date/time.
Maximilian Seesslen

11:03 CANDis Fehler #555 (Erledigt): RTC is not working on any device any more: Even when setting the time via cordyceps, the time is set to 0 afteer the RTC-Sync.
This should not happen even if t... Maximilian Seesslen

17:20 CANDis Fehler #554 (Erledigt): Touch calibration needed: Calibration values are hardcoded at the moment.
At least one device does not work very good with this values.
The... Maximilian Seesslen

13:23 CANHub Feature #553 (Neu): implement monitor mode: Implement an monitor class that shows an list of connections.
The server class can emit an "updated" event after new... Maximilian Seesslen

20:47 CANHub Feature #551 (Erledigt): Move "CConnectors" to namespace "CANHub": Maximilian Seesslen
20:42 CANHub Feature #545 (Erledigt): Implement reconnection of connectors: Maximilian Seesslen
20:41 CANHub Feature #543 (Erledigt): Rename CANServer to CANHub: Maximilian Seesslen
20:40 CANHub Feature #539 (Erledigt): implement unit tests: Maximilian Seesslen
20:35 CANHub Feature #538 (Erledigt): Finalize CANDump: Maximilian Seesslen
14:57 CANHub Feature #552 (Neu): Implement Heartbeat: For Loop detection an heartbeat should be generated periodically.
It is send to all TCP connectors, not physical CAN... Maximilian Seesslen
14:41 TDTPrompt Feature #542 (Erledigt): Build up UI according to XML file: Maximilian Seesslen
14:41 TDTPrompt Feature #548 (Erledigt): Integrate CANHub: Maximilian Seesslen

19:48 CANHub Feature #551 (Erledigt): Move "CConnectors" to namespace "CANHub": Maximilian Seesslen
19:46 CANHub Feature #549 (Erledigt): unit tests: inherit from connector classes: Maximilian Seesslen

16:45 TDTPrompt Feature #550 (Neu): Show CANHub connector status on status bar: This has to be implemented in CANHub first.
Messages per minute would be interesting. Steal it from cordyceps.
Th... Maximilian Seesslen
16:35 CANHub Feature #549 (Erledigt): unit tests: inherit from connector classes: Dont aggregate.
Maximilian Seesslen
16:25 TDTPrompt Feature #548 (Erledigt): Integrate CANHub: I want to see actual data.
Maximilian Seesslen
16:12 CANHub Feature #547 (Neu): Loop detection: A server can send an ID message periodically. The ID is generated by libuuid.
If an server receives its own ID, a lo... Maximilian Seesslen
16:01 CANHub Feature #546 (Neu): multiple servers: Scenario:
connect CAN-segments via CAN.
i.MX6 with CAN connects with other device with USB dongle.
Maximilian Seesslen
15:34 CANHub Feature #545 (Erledigt): Implement reconnection of connectors: When the client PC was on standby and gets woken up, i assume the application just quits.
This will be anoying when ... Maximilian Seesslen
15:23 CANHub Fehler #544 (Neu): Connectors: tolerate wrong sizes: When PC is woken up from standby, the received size is a random number.
Check if this is tolerated when receiving.
Maximilian Seesslen
15:16 CANHub Feature #543 (Erledigt): Rename CANServer to CANHub: This naming is more distinct.
CANHub provides
* libCANHub
* CANServer
* CAN-Connectors
* TCP-Connectors
* CANDu... Maximilian Seesslen

17:24 TDTPrompt Feature #542 (Erledigt): Build up UI according to XML file: Check cordyceps; there is already something parsing XML.... Maximilian Seesslen

Auch abrufbar als: Atom

Software