Software

25.05.2022

14:52 Biwak Feature #190 (Erledigt): add host tool canpong

Create an test tool for host that will receive can messages, increase the id by one and send it back.
Maximilian Seesslen

24.05.2022

12:22 Sensemux SW Fehler #186: RTC does not store date

Reading software clearifies that this behaviour is by design.
I remember i fixed something; Check if there is an old... Maximilian Seesslen

11:19 Sensemux SW Fehler #186: RTC does not store date

https://www.stm32duino.com/viewtopic.php?t=775
It claims that STM32F1 just can not keep the date and user has to k... Maximilian Seesslen

11:04 Sensemux SW Fehler #186 (Neu): RTC does not store date

Time is working fine.
Seting date and time works fine. After reset the time is still valid but the date is zeroed.
... Maximilian Seesslen

23.05.2022

14:43 CANDis Feature #185 (Neu): Evaluate RTC calibration

There is an little drift in the RTC.
|_. Value |_. Behaviour |_. Drift |
| 0 | Running to slow | ... Maximilian Seesslen

14:37 CANDis Fehler #184 (Erledigt): periodically sync RTC with extern RTC

Drift of intern RTC is quite big.
Perfom an sync every hour.
Maximilian Seesslen

13.05.2022

12:21 Campo Feature #176: create custom targets to cmake file to create and deploy documents

Auto-Tagging is bad. Reduce functions;
- prepareTag
- createDocumentation
- uploadDocumentation
- createArchive
... Maximilian Seesslen

11.05.2022

17:53 Campo Feature #176: create custom targets to cmake file to create and deploy documents

With Software this is fine.
In der Hardware entsteht die Doku i.d.R. nach der Inbetriebnahme.
Hochzahlen des Patc... Maximilian Seesslen

11:42 Campo Feature #176: create custom targets to cmake file to create and deploy documents

Little bit more complicated.
The open Changelogs may have to be merged (relay this feature)
Tags in the files hav... Maximilian Seesslen

28.04.2022

16:12 Campo Feature #176 (Neu): create custom targets to cmake file to create and deploy documents

add_custom_target()
The bash-script can still be used but make it more comfortable.
* doc; creates documentatio... Maximilian Seesslen

15:09 horo Feature #175 (Abgewiesen): low temperature profile

Maybe due to the additional flux the connectors look very burned.
Add an low temperature curve, 20sec @ 230°C ? Maximilian Seesslen