Software » Campo

15.10.2021

12:21 Unterstützung #82 (Erledigt): Add test functions for periphery

The bringup software should be able to easily test periphery.
CANIO already has some test routines. They should be... Redmine Admin

07.10.2021

21:04 Biwak Feature #79 (Erledigt): retain: support length and crc32 again

Maximilian Seesslen

15:37 Biwak Feature #79 (Erledigt): retain: support length and crc32 again

8-Bytes-Version is not good.
Most STM32 only support CRC32. CRC8 is not very save.
Length should be supported.... Redmine Admin

05.10.2021

11:43 libcampo Unterstützung #75 (Neu): bringup: Create test to write internal flash

Code is quite crappy; needs rework.
Flash should be written in unaligned shredded parts. Afterwards the string mus... Redmine Admin

18.09.2021

14:15 Biwak Fehler #66 (Abgewiesen): STMF042: Check HSI calibration/trimming

Seems to be a software issue. Long delay in interrupt solves the problem.
Maximilian Seesslen

17.09.2021

20:14 Biwak Unterstützung #67 (Erledigt): Support STM32G441 FDCAN

Maximilian Seesslen

20:10 Biwak Unterstützung #67: Support STM32G441 FDCAN

Looks good. 125KBit no issues.
250KBit: Oszi should not be connected
500KBit: 120Ohm terminator is needed
1MBit: n... Maximilian Seesslen

14:10 Biwak Unterstützung #67 (Erledigt): Support STM32G441 FDCAN

check
STM32CubeG4-master/Projects/STM32G474E-EVAL/Examples/FDCAN/FDCAN_Com_IT/Src/main.c
Someone had similar p... Redmine Admin

11:56 Biwak Fehler #66 (Abgewiesen): STMF042: Check HSI calibration/trimming

Uart is not working correctly (only 9600 Baud, also not completely without problems).
Several MCUs show same behavio... Redmine Admin