Aktivität

von 12.09.2021 bis 11.10.2021

14:02 Hardware Feature #80 (Erledigt): create I2C test board: Beschreibung
For easy I2C verification an small I2C-Board could be used.
It could contain more periphery to be ... Maximilian Seesslen

21:04 Biwak Feature #79 (Erledigt): retain: support length and crc32 again: Maximilian Seesslen
15:37 Biwak Feature #79 (Erledigt): retain: support length and crc32 again: 8-Bytes-Version is not good.
Most STM32 only support CRC32. CRC8 is not very save.
Length should be supported.... Redmine Admin

11:43 libcampo Unterstützung #75 (Neu): bringup: Create test to write internal flash: Code is quite crappy; needs rework.
Flash should be written in unaligned shredded parts. Afterwards the string mus... Redmine Admin

20:14 Biwak Unterstützung #67 (Erledigt): Support STM32G441 FDCAN: Maximilian Seesslen
20:10 Biwak Unterstützung #67: Support STM32G441 FDCAN: Looks good. 125KBit no issues.
250KBit: Oszi should not be connected
500KBit: 120Ohm terminator is needed
1MBit: n... Maximilian Seesslen
14:10 Biwak Unterstützung #67 (Erledigt): Support STM32G441 FDCAN: check
STM32CubeG4-master/Projects/STM32G474E-EVAL/Examples/FDCAN/FDCAN_Com_IT/Src/main.c
Someone had similar p... Redmine Admin
20:01 Biwak Revision e19ff18e (libbiwak3): FDCAN: working 250KBit: Redmine Admin
16:52 Biwak Revision 5b31c6c7 (libbiwak3): compilable FDCAN: Redmine Admin
11:56 Biwak Fehler #66 (Abgewiesen): STMF042: Check HSI calibration/trimming: Uart is not working correctly (only 9600 Baud, also not completely without problems).
Several MCUs show same behavio... Redmine Admin

23:11 horo Feature #58 (Erledigt): Create versions, tags.: Maximilian Seesslen
22:44 Biwak Revision a0e73bc7 (libbiwak3): dummy draft for fdcan: Redmine Admin

09:33 TCB Feature #51 (Erledigt): check gdb version to be 10.2: its included Maximilian Seesslen
09:32 TCB Feature #50 (Erledigt): Check binutils to be version 2.37: Its included Maximilian Seesslen

11:54 horo Feature #58 (Erledigt): Create versions, tags.: The results are quite good at the moment.
Create version and tag.
Afterwards temperatures could be lowered. Redmine Admin
11:52 horo Fehler #15 (Erledigt): Solder prozess not reliable: Redmine Admin
11:49 horo Fehler #15 (Gelöst): Solder prozess not reliable: Redmine Admin
11:49 horo Fehler #15 (In Bearbeitung): Solder prozess not reliable: Redmine Admin
11:41 horo Fehler #15: Solder prozess not reliable: Results very good with new solder paste.
Check if the temperatures could even be reduced. Redmine Admin
11:51 horo Fehler #17 (Erledigt): Verify temperature sensor: Redmine Admin
11:50 horo Fehler #16 (Erledigt): Verify the solder ramps: Redmine Admin
11:28 Campo Fehler #19 (Erledigt): multiple binaries in single cmake project: This works. Different Arena-Apps can be specified (e.g. for minimal bringup) Redmine Admin
10:50 Biwak Feature #56 (Erledigt): work along with picolibc: Redmine Admin
10:28 TCB Feature #10 (Erledigt): Use Pico-libc: Redmine Admin
10:28 TCB Feature #49 (Erledigt): update gcc to 11.2.: Redmine Admin

19:05 Biwak Revision 8d9a750e (libbiwak3): added support for stm32g441: Redmine Admin

Auch abrufbar als: Atom

Redmine