Aktivität
von 01.09.2025 bis 30.09.2025
28.09.2025
- 
  
18:39 CANHub Feature #698 (Neu): Dynamic port assigning
 - On build server the (unti) tests can fail becuase parallel build/test already started an CANHub-Server on same TCP po...
 - 
  
18:36 CANHub Feature #624 (Erledigt): Bring it github
 
26.09.2025
- 
  
13:32 Biwak Feature #697 (Neu): Simulate touch display on Qt buard gui
 - Create an own display class inheriting QLabel and implement an own...
 - 
  
11:47 Biwak Fehler #696 (In Bearbeitung): Touch: Whole processing is done in ISR
 
25.09.2025
- 
  
16:07 Biwak Fehler #696 (In Bearbeitung): Touch: Whole processing is done in ISR
 - In theory the application could be accessing EEPROM and user can press touch.
The I2C periphery would then get recon... - 
  
13:56 Biwak Feature #671 (To be verified): Implement dynamic sleep
 - 
  
13:56 Biwak Feature #671 (In Bearbeitung): Implement dynamic sleep
 - 
  
13:56 Biwak Feature #695 (Neu): Verify dynamic sleep
 - Dynamic sleep in CONFIG_BIWAK_DATA_EVENT is nice.
Fine-Adjusting may be needed or at least verified.... - 
  
13:23 liblepto Feature #679 (To be verified): Implement CONFIG_LEPTO_RING_CUSTOM_DATA
 - 
  
13:19 liblepto Feature #679 (In Bearbeitung): Implement CONFIG_LEPTO_RING_CUSTOM_DATA
 - 
  
13:16 Biwak Feature #692 (To be verified): CRC: Make methods const.
 - 
  
13:16 Biwak Feature #692 (In Bearbeitung): CRC: Make methods const.
 - 
  
13:00 Biwak Fehler #688 (To be verified): Host GUI: Pressing button does not result in interrupt
 - Unit test is created.
 - 
  
13:00 Biwak Fehler #688 (In Bearbeitung): Host GUI: Pressing button does not result in interrupt
 - Provide some examples. The examples should work for Qt and Nucleo-F303K8.
 - 
  
09:52 Biwak Feature #690 (To be verified): Retain: Use bigger data type than 8bit for counter
 - 
  
09:52 Biwak Feature #690 (In Bearbeitung): Retain: Use bigger data type than 8bit for counter
 - 
  
09:51 liblepto Fehler #694 (To be verified): CList: Add method for searching for item
 - 
  
09:51 liblepto Fehler #694 (In Bearbeitung): CList: Add method for searching for item
 
24.09.2025
- 
  
20:38 liblepto Fehler #694 (To be verified): CList: Add method for searching for item
 - Custom compare operator should be provided.
Don't compare the elements directly but use iterators.
The list may not... - 
  
20:26 CANRec Feature #646 (Erledigt): Ring buffer
 - 
  
17:18 Biwak Feature #689 (To be verified): Allow more retain containers than two
 - 
  
17:18 Biwak Feature #689 (In Bearbeitung): Allow more retain containers than two
 - 
  
13:18 Rufa Feature #693 (Neu): Simplify smoothener
 - A CRing can be used to store values. Unplausible values can be ignored.
The current implementation samples x value... - 
  
11:37 Biwak Feature #692 (To be verified): CRC: Make methods const.
 - diff --git a/include/biwak/crc.hpp b/include/biwak/crc.hpp
index b6a451f2..db16b3e5 100644
--- a/include/biwak/crc.... 
23.09.2025
- 
  
16:27 CANRec Feature #691 (Neu): Specify timestamps
 - The timestamps via CAN are only 32bit.
On this channel the 'seconds since millenium' can be used. Zigbee is using th... 
21.09.2025
- 
  
14:15 CANRec Feature #675 (Erledigt): Use NOR for header data
 
19.09.2025
- 
  
19:48 Biwak Feature #690 (To be verified): Retain: Use bigger data type than 8bit for counter
 - 512 erase blocks of NOR can not be handled. At least 16bit needed.
 - 
  
19:41 Biwak Feature #689 (To be verified): Allow more retain containers than two
 - CANRec need this feature.
 
17.09.2025
- 
  
14:39 Biwak Feature #628 (To be verified): use 128 bit UID
 - 
  
14:39 Biwak Feature #628 (In Bearbeitung): use 128 bit UID
 - 
  
11:11 fosh Feature #683 (To be verified): Add support for backspace key
 - 
  
11:10 fosh Feature #683 (In Bearbeitung): Add support for backspace key
 - 
  
11:10 Biwak Feature #687 (To be verified): Blink modes: Use slower timings for host
 - 
  
11:10 Biwak Feature #687 (In Bearbeitung): Blink modes: Use slower timings for host
 - 
  
10:43 Biwak Fehler #688 (To be verified): Host GUI: Pressing button does not result in interrupt
 - Qt signal/slot should be used to match behaviour on MCU.
 
16.09.2025
- 
  
22:02 Biwak Feature #687 (To be verified): Blink modes: Use slower timings for host
 - On a GUI the usually fast flashing of an LED can not always be seen on Widgets. Blinking has to be slowered down.
... - 
  
20:38 liblepto Feature #632 (Erledigt): add diag.h
 - 
  
20:30 Biwak Feature #686 (Erledigt): Retain: Don't store flash address for each container
 - 
  
17:36 Biwak Feature #686 (Erledigt): Retain: Don't store flash address for each container
 - Its ok to store it when there are only 2 containers. But CANRec will use the mechanism for a whole NOR chip.
Its not... - 
  
13:26 liblepto Feature #685 (To be verified): Support expandable lists
 - 
  
11:09 liblepto Feature #685 (In Bearbeitung): Support expandable lists
 - 
  
11:41 CANRec Feature #580 (Abgewiesen): add command to erase older data
 - Once there is an Ring-buffer implemented and an fast-find command this 'erasing' does not make much sense.
It even b... - 
  
11:35 CANRec Fehler #464 (Abgewiesen): time zones are not handled at all
 - 
  
11:33 liblepto Feature #678 (Abgewiesen): Ring: Support CONFIG_LEPTO_RING_CUSTOM_DATA
 - 
  
11:22 liblepto Feature #684 (To be verified): Add unit tests for strings.
 - 
  
11:22 liblepto Feature #684 (In Bearbeitung): Add unit tests for strings.
 
15.09.2025
- 
  
19:53 liblepto Feature #685 (To be verified): Support expandable lists
 - 
  
18:28 liblepto Feature #684 (To be verified): Add unit tests for strings.
 - Check if operators produce expected strings.
 - 
  
15:00 fosh Feature #683 (To be verified): Add support for backspace key
 - Maybe the arrow keys can also at leased be catched so they do not make strange things.
 - 
  
14:56 fosh Fehler #583 (Abgewiesen): When too much commands are added, no command is available
 - Could not be reproduced. Everything works like expected.
 
10.09.2025
- 
  
14:04 liblepto Feature #679 (To be verified): Implement CONFIG_LEPTO_RING_CUSTOM_DATA
 - The data area may already exist in memory or it is not about real RAM. It could be pages on a sd card or pages in ext...
 - 
  
13:22 liblepto Feature #678 (Abgewiesen): Ring: Support CONFIG_LEPTO_RING_CUSTOM_DATA
 - The data area may already exist in memory or it is not about real RAM. It could be pages on a sd card or pages in ext...
 
09.09.2025
- 
  
21:30 fosh Feature #677 (Neu): Run on host natively
 - Should work without biwak and campo.
 - 
  
11:36 CANRec Fehler #464: time zones are not handled at all
 - Thats fine. Just store everything UTC/GMT. RTC shall also use UTC.
 
08.09.2025
- 
  
14:10 libtdt Feature #673 (Erledigt): Rework printer
 - 
  
14:09 libtdt Feature #674 (Erledigt): tdtGen: Also generate enums for units wich are of type enum themself
 - Implemented.
 
07.09.2025
- 
  
15:09 CANRec Feature #675 (Erledigt): Use NOR for header data
 - Writing to the first blocks of the SD card over and over again let them die quickly.
The rest of the data would work... 
05.09.2025
- 
  
20:46 libtdt Feature #674 (Erledigt): tdtGen: Also generate enums for units wich are of type enum themself
 - 
  
13:50 Biwak Feature #628: use 128 bit UID
 - Saved 36 Bytes :(. At least much cleaner code.
 - 
  
11:27 libtdt Feature #673 (Erledigt): Rework printer
 - The units are dynamically created via tdtGen now.
Many prints for unit-enums can be catched by a generic print.
 
03.09.2025
- 
  
16:01 liblepto Feature #672 (Erledigt): configuration documentation
 
Auch abrufbar als: Atom