Aktivität

von 09.09.2024 bis 08.10.2024

08.10.2024

22:29 Biwak Revision 6e6aeda9 (libbiwak3): downsize: Redmine Admin
18:34 Biwak Feature #572 (Neu): Linker script: add ram area vor vector table: At the moment RAM starts right after the ram-vector-table. This is ok but there is no section for vector table.
I as... Maximilian Seesslen

07.10.2024

14:50 CANDis Fehler #558: Reading touch calibration is very unreliable: I2C has exactly the same issue on main switch.
Most times it works.
But some times after reset-button on debug-boar... Maximilian Seesslen
14:41 Biwak Feature #570 (Erledigt): shrink binary size once again: The CTimer is a little bit nasty.
* let it work again; i forgot to set the instance somewhere.
* remove the memse... Maximilian Seesslen

06.10.2024

14:30 Biwak Revision 36c4cc30 (libbiwak3): Handle CAN TX error event: An event may result in another CAN message. To avoid infinite loop the error
event is only send once when the problem... Redmine Admin
12:40 Biwak Revision 7744fb6b (libbiwak3): Increased number of CAN rx buffers: 24 buffers has still problem when a lot of devices get scanned. Redmine Admin
12:12 Biwak Revision 7ed01d74 (libbiwak3): shrink bootloader by 0x400: Redmine Admin
11:28 Biwak Revision 3c41950b (libbiwak3): i2c: implemented waitBusy(): EEPROMS need some time to write data. A fixed delay is not very
performant.
Check if device is acknowdleging to verif... Redmine Admin

01.10.2024

15:33 Biwak Fehler #568 (Erledigt): flash-i2c: avoid delays; check for busy: According to microchip, the best way to check if the operation is finished is checking for "ACK".
Start start reding... Maximilian Seesslen

30.09.2024

10:34 Biwak Revision 9a33d2f4 (libbiwak3): Merge branch '500-qt-integration' of /data/srv/git/libbiwak into 500-qt-integration: Redmine Admin
10:31 Biwak Revision f4033d3c (libbiwak3): draft: Redmine Admin

29.09.2024

11:04 Biwak Revision 5b72421c (libbiwak3): updated changelog for v2.9.0: Redmine Admin
07:33 Biwak Revision dbf32945 (libbiwak3): moved imago from campo to lepto: Redmine Admin
06:21 Biwak Revision 22da804e (libbiwak3): support dummy spi for host tests: Redmine Admin
06:13 Biwak Revision 2da4d7eb (libbiwak3): linux: added eSpiMode3Mhz: Redmine Admin
05:47 Biwak Revision 3b1c5969 (libbiwak3): qt-board: add dummy support for SPI: Redmine Admin

28.09.2024

18:26 Biwak Revision 9f0453b3 (libbiwak3): handle config defines corectly: Redmine Admin
18:09 Biwak Revision b63d4a47 (libbiwak3): proper use of config defines: Redmine Admin
16:57 Biwak Revision 6633ee23 (libbiwak3): fixed config define: Redmine Admin
13:52 Biwak Revision 19ada3d4 (libbiwak3): use conpfig macros correctly: Redmine Admin
13:18 Biwak Revision 376b5b64 (libbiwak3): tests: check for some config macros: Redmine Admin
12:44 Biwak Revision e9486863 (libbiwak3): force git vcersion: Redmine Admin
12:40 Biwak Revision e240087a (libbiwak3): force git vcersion: Redmine Admin
12:31 Biwak Revision ba411717 (libbiwak3): force git vcersion: Redmine Admin
12:31 Biwak Revision 7f34bc14 (libbiwak3): force git vcersion: Redmine Admin
12:30 Biwak Revision 9a624188 (libbiwak3): force git vcersion: Redmine Admin
12:25 Biwak Revision 9e1af1ca (libbiwak3): fixed missing header: Redmine Admin
11:41 Biwak Revision d33895cc (libbiwak3): added configuration check: Redmine Admin

27.09.2024

20:47 Biwak Revision 03ccb5e6 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
20:47 Biwak Revision d8364192 (libbiwak3): log: use ELogCode: Redmine Admin
20:31 Biwak Revision 1a11f076 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
20:26 Biwak Revision a58ad193 (libbiwak3): fixed merge conflict: Redmine Admin
20:21 Biwak Revision c9829765 (libbiwak3): call logHeartBeat() in logEventLoop(): Redmine Admin
20:18 Biwak Revision 544bc340 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
19:55 Biwak Revision c6118352 (libbiwak3): added tests for heartbeat behaviour: Redmine Admin
19:55 Biwak Revision df015962 (libbiwak3): fixes for new heartbeat implementation: Redmine Admin
19:53 Biwak Revision c5d3ead1 (libbiwak3): added lLogInfo(): Used to check which implementation is actually used. Tests have to
verify thatbiwaks implementation ius active. Redmine Admin

26.09.2024

21:09 Biwak Revision 8f2f232a (libbiwak3): [#567] clean up Log-Heartbeat code: Avoid injecting the log event to ELogCategory.
Replace ELogCategory by ELogCode which also contains category and even... Redmine Admin

25.09.2024

16:40 Biwak Revision 57e90eba (libbiwak3): log: fixed usage of config macros: Redmine Admin
16:39 Biwak Revision 3f615f0d (libbiwak3): dummy support for option bytes on host system: Redmine Admin
15:03 Biwak Revision fcd51cf7 (libbiwak3): fixed handling of configuration macros: Redmine Admin
13:59 Biwak Feature #567 (Neu): Clean up heart-beat-LED-code: There is a mess up.
void hbEvent( ELogCategory category ): always a dummy
void heartbeatTrampoline(CHeartBeat::ES... Maximilian Seesslen
13:06 Biwak Revision 2f135983 (libbiwak3): fixed config macro handling: Redmine Admin

24.09.2024

22:59 Biwak Revision 8528c219 (libbiwak3): fixed merge conflict: Redmine Admin
22:58 Biwak Revision d016287d (libbiwak3): i2c_slave: use config macros correctly: Redmine Admin
22:14 Biwak Revision ca297574 (libbiwak3): fixed merge conflict: Redmine Admin
22:04 Biwak Revision 3de389be (libbiwak3): draft: Redmine Admin
22:03 Biwak Revision 2ac95ce2 (libbiwak3): added biwakPrintCompilerInfo(): Redmine Admin
22:00 Biwak Revision 743be98c (libbiwak3): uart: check for missing "AdvancedInit" in typedef: Redmine Admin
21:09 Biwak Revision c02dc271 (libbiwak3): fixed usagew of config macro: Redmine Admin
21:08 Biwak Revision 1f1db688 (libbiwak3): fixed log output: Redmine Admin
19:12 Biwak Revision 2fe99826 (libbiwak3): more expressive error output: Redmine Admin
18:41 Biwak Revision a9648563 (libbiwak3): cmake: stop biwak about missing config when surpressed: Redmine Admin
17:43 Biwak Revision 337a8010 (libbiwak3): fixed handling configuration macros: Redmine Admin
17:43 Biwak Revision d02662a2 (libbiwak3): cmake: depend all soucre files to config header: Redmine Admin

23.09.2024

15:39 Biwak Revision 70e0c1a2 (libbiwak3): log: fixed header for default config: Redmine Admin
15:10 Biwak Revision 41d455e0 (libbiwak3): fixed usage of BIWAK_USE_INPUT_SIGNAL: Redmine Admin
14:29 Biwak Revision 5a7d644e (libbiwak3): cmake: cleanup: Redmine Admin
14:13 Biwak Revision 10f3698e (libbiwak3): fixed test for logging: Redmine Admin
14:04 Biwak Revision 7e576f5a (libbiwak3): cmake: include config header automatically: Redmine Admin
09:51 Biwak Revision a2f1fb43 (libbiwak3): i2c: use leptos IS_ENABLED: Redmine Admin
09:51 Biwak Revision b2409cf4 (libbiwak3): constify: Redmine Admin

21.09.2024

18:14 CANDis Fehler #559 (Abgewiesen): When adding item to Minutnik, artifacts from Minutnik-Screen are seen on the items screen: Not reproducible on v0.7.1 Maximilian Seesslen
10:47 theme_noto Feature #566 (Neu): create const icon references: The linker already knows the icon addresses.
Looking up the icon addresses at start works fine but takes some time.
... Maximilian Seesslen
10:45 theme_noto Fehler #530 (Erledigt): change "binary" macro: Maximilian Seesslen

13.09.2024

21:44 Biwak Revision 62d20aee (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
21:44 Biwak Revision 47fb3295 (libbiwak3): log: adjust layout for longer filename length: Redmine Admin
20:23 Biwak Revision b1094136 (libbiwak3): draft: Redmine Admin
20:23 Biwak Revision 61c473e8 (libbiwak3): option_bytes: fixed compiling for stm32g4: Redmine Admin
20:23 Biwak Revision 5ed4ffec (libbiwak3): cmake: use use_common_config_headers(): Redmine Admin

12.09.2024

21:01 Biwak Revision ed45bae6 (libbiwak3): cmake: check variable COMMON_CONFIG_HEADER instead of checking campo folder: "campo" is specific. Redmine Admin
12:01 Biwak Revision d90afeca (libbiwak3): cmake: look for config/config.h directly: Redmine Admin

11.09.2024

21:03 Biwak Revision 810f535e (libbiwak3): log: fixed showing the log category: Redmine Admin
21:03 Biwak Revision 892ad91b (libbiwak3): CFlashI2c::dump(): show address width: Redmine Admin
21:02 Biwak Revision 3f11fe9b (libbiwak3): added LED blink mode for bootloader: Redmine Admin
21:01 Biwak Revision fc9711e0 (libbiwak3): added CI2cSlave::getBus(): Redmine Admin
21:01 Biwak Revision 5e691b62 (libbiwak3): cmake: evaluate BIWAK_CONFIG: BIWAK_CONFIG can provide an project wide header for configuration
defines.
Every compile unit will automatically incl... Redmine Admin
20:59 Biwak Revision 2a9ab208 (libbiwak3): added linker_script.h: This provides access to symbols which are set in linker script Redmine Admin
20:58 Biwak Revision 77adbdc7 (libbiwak3): added support for stm32 option bytes: Redmine Admin
20:58 Biwak Revision b5a51dd7 (libbiwak3): cmake: fixed formating: Redmine Admin
20:43 libcampo Feature #564 (Erledigt): config-header: use nice macros to check for features: Maximilian Seesslen
20:29 libcampo Feature #565 (Erledigt): config description: Maximilian Seesslen
13:31 libcampo Feature #565: config description: ... Maximilian Seesslen

10.09.2024

15:40 libcampo Feature #565 (Erledigt): config description: VAGUS_USE_UID
Support for biwak UID. NMT can change NodeID by UID. CollectHwData can store it so production data ... Maximilian Seesslen
15:00 libcampo Feature #564 (Erledigt): config-header: use nice macros to check for features: ... Maximilian Seesslen

09.09.2024

14:13 libcampo Feature #563 (Neu): Remove template-feature from vagus: See wiki for descriptions.
Library should work with project-config-header instead of magically perdefines and pre-de... Maximilian Seesslen

Auch abrufbar als: Atom

Projekt

Allgemein

Profil

Software

Aktivität

Aktivität

08.10.2024

07.10.2024

06.10.2024

05.10.2024

04.10.2024

03.10.2024

01.10.2024

30.09.2024

29.09.2024

28.09.2024

27.09.2024

26.09.2024

25.09.2024

24.09.2024

23.09.2024

21.09.2024

13.09.2024

12.09.2024

11.09.2024

10.09.2024

09.09.2024