Aktivität

von 29.01.2024 bis 27.02.2024

14:25 Biwak Revision 0a673da6 (libbiwak3): fixed unit tests for logging: Maximilian Seesslen
14:25 Biwak Revision efeed075 (libbiwak3): fixed ADC initialization for many MCUs: Maximilian Seesslen
09:54 Biwak Revision 0b89e96e (libbiwak3): shrink log output: Redmine Admin
09:54 Biwak Revision a273527b (libbiwak3): flash: set write page size to 8 bytes: Redmine Admin
09:53 Biwak Revision 9db5d30e (libbiwak3): enabled usage of UART1: Redmine Admin
09:53 Biwak Revision 3a9dc225 (libbiwak3): CWkup: added enableWakeup() and disableWakeup(): Redmine Admin
09:52 Biwak Revision 672b94ba (libbiwak3): fixed typo in macro: Redmine Admin

18:51 Biwak Feature #228 (Abgewiesen): CPwmLine: implement blink mode adjustement: CFader() already handles this.
The fading speed is calculated at initialization time. Afterwards only the target is ... Maximilian Seesslen
18:31 libcampo Feature #497 (Neu): campo.sh: add changeLogSubmodules: Automatically generate the changes of the submodules for an tag.
For this to work, the tags have to be parsed.
The ... Maximilian Seesslen

18:37 Mainswitch Requirement #482 (Erledigt): Pseudo-Off: Due to non-functional WKUP, the first boards should not got to standby because
they can not be woken up any more.
... Maximilian Seesslen
18:01 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low: Target voltage is 2,4V.
Check should be done every 15min.
Error should be send at 2,2V (end-point voltage of NiMH i... Maximilian Seesslen
17:48 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout: After an configurable ammount of time, the device should automatically turn off.
The 'off' is an hard power-off. O... Maximilian Seesslen
17:29 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release: I assumed that the device will immediately repower on when shutting down while button is still pressed.
Has to be ve... Maximilian Seesslen
17:27 Mainswitch Requirement #478 (Erledigt): LED States: * The LED is permanent on in operational mode
* The LED is blinking normal when shutdown was initiated by holding bu... Maximilian Seesslen

21:38 Biwak Revision 09d79e9e (libbiwak3): added events header: Redmine Admin
21:35 Biwak Revision 51a99b70 (libbiwak3): downsize: Redmine Admin
21:34 Biwak Revision 6032b8c8 (libbiwak3): support for bootloader on cortex-m0: Redmine Admin
21:34 Biwak Revision 8b1766f3 (libbiwak3): heartbeat: moved events to logging: Redmine Admin

Auch abrufbar als: Atom

Software