Software

18.02.2024

11:37 Biwak Revision 7545e5d5 (libbiwak3): fixed building on stm32l1

Redmine Admin

17.02.2024

17:09 Biwak Revision be0af6f4 (libbiwak3): Merge branch 'master' into devel

Redmine Admin

15.02.2024

15:48 libcampo Feature #491 (Erledigt): Vagus: implement command to switch to bootloader

Option-Bytes are used in first test.
Maximilian Seesslen

11.02.2024

15:30 Biwak Revision 41f1b1d1 (libbiwak3): draft

Redmine Admin

09:04 CANSwitch Test #489 (Neu): Send keep-alive

When changing illumination, an keep-alive event should be send. Maximilian Seesslen

08:51 CANSwitch Test #488 (Neu): Fading out before timeout

Maximilian Seesslen

08:50 CANSwitch Test #487 (Erledigt): Fading working

Maximilian Seesslen

07:43 CANSwitch Test #486 (In Bearbeitung): timeout warning

Maximilian Seesslen

07:43 CANSwitch Test #486 (Erledigt): timeout warning

Maximilian Seesslen

07:42 CANSwitch Test #486 (In Bearbeitung): timeout warning

Maximilian Seesslen

07:43 CANSwitch Test #485 (In Bearbeitung): Timeout

Maximilian Seesslen

07:43 CANSwitch Test #485 (Erledigt): Timeout

Maximilian Seesslen

07:40 CANSwitch Test #485 (Erledigt): Timeout

Maximilian Seesslen

06.02.2024

20:27 Biwak Revision d5c3a345 (libbiwak3): fixed typo

Redmine Admin

05.02.2024

22:56 Mainswitch Feature #347 (Erledigt): Send battery level via CAN

Maximilian Seesslen

22:54 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release

Maximilian Seesslen

22:51 Mainswitch Requirement #478 (Erledigt): LED States

Maximilian Seesslen

22:51 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low

Maximilian Seesslen

22:11 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout

Maximilian Seesslen

22:02 Mainswitch Requirement #482 (Erledigt): Pseudo-Off

Maximilian Seesslen

22:02 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown

Maximilian Seesslen

21:51 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown

When shutdown via button is triggered, a state has to wait untill the button is released.
Otherwise the device would... Maximilian Seesslen

01.02.2024

18:37 Mainswitch Requirement #482 (Erledigt): Pseudo-Off

Due to non-functional WKUP, the first boards should not got to standby because
they can not be woken up any more.
... Maximilian Seesslen

18:01 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low

Target voltage is 2,4V.
Check should be done every 15min.
Error should be send at 2,2V (end-point voltage of NiMH i... Maximilian Seesslen

17:48 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout

After an configurable ammount of time, the device should automatically turn off.
The 'off' is an hard power-off. O... Maximilian Seesslen

17:29 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release

I assumed that the device will immediately repower on when shutting down while button is still pressed.
Has to be ve... Maximilian Seesslen

17:27 Mainswitch Requirement #478 (Erledigt): LED States

* The LED is permanent on in operational mode
* The LED is blinking normal when shutdown was initiated by holding bu... Maximilian Seesslen

31.01.2024

21:38 Biwak Revision 09d79e9e (libbiwak3): added events header

Redmine Admin

21:35 Biwak Revision 51a99b70 (libbiwak3): downsize

Redmine Admin

21:34 Biwak Revision 6032b8c8 (libbiwak3): support for bootloader on cortex-m0

Redmine Admin

21:34 Biwak Revision 8b1766f3 (libbiwak3): heartbeat: moved events to logging

Redmine Admin