Aktivität

von 14.01.2024 bis 12.02.2024

09:04 CANSwitch Test #489 (Neu): Send keep-alive: When changing illumination, an keep-alive event should be send. Maximilian Seesslen
08:51 CANSwitch Test #488 (Neu): Fading out before timeout: Maximilian Seesslen
08:50 CANSwitch Test #487 (Erledigt): Fading working: Maximilian Seesslen
07:43 CANSwitch Test #486 (In Bearbeitung): timeout warning: Maximilian Seesslen
07:43 CANSwitch Test #486 (Erledigt): timeout warning: Maximilian Seesslen
07:42 CANSwitch Test #486 (In Bearbeitung): timeout warning: Maximilian Seesslen
07:43 CANSwitch Test #485 (In Bearbeitung): Timeout: Maximilian Seesslen
07:43 CANSwitch Test #485 (Erledigt): Timeout: Maximilian Seesslen
07:40 CANSwitch Test #485 (Erledigt): Timeout: Maximilian Seesslen

22:56 Mainswitch Feature #347 (Erledigt): Send battery level via CAN: Maximilian Seesslen
22:54 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release: Maximilian Seesslen
22:51 Mainswitch Requirement #478 (Erledigt): LED States: Maximilian Seesslen
22:51 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low: Maximilian Seesslen
22:11 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout: Maximilian Seesslen
22:02 Mainswitch Requirement #482 (Erledigt): Pseudo-Off: Maximilian Seesslen
22:02 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown: Maximilian Seesslen
21:51 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown: When shutdown via button is triggered, a state has to wait untill the button is released.
Otherwise the device would... Maximilian Seesslen

18:37 Mainswitch Requirement #482 (Erledigt): Pseudo-Off: Due to non-functional WKUP, the first boards should not got to standby because
they can not be woken up any more.
... Maximilian Seesslen
18:01 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low: Target voltage is 2,4V.
Check should be done every 15min.
Error should be send at 2,2V (end-point voltage of NiMH i... Maximilian Seesslen
17:48 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout: After an configurable ammount of time, the device should automatically turn off.
The 'off' is an hard power-off. O... Maximilian Seesslen
17:29 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release: I assumed that the device will immediately repower on when shutting down while button is still pressed.
Has to be ve... Maximilian Seesslen
17:27 Mainswitch Requirement #478 (Erledigt): LED States: * The LED is permanent on in operational mode
* The LED is blinking normal when shutdown was initiated by holding bu... Maximilian Seesslen

17:47 campoTemplate Fehler #474 (Neu): Git history is not reset: Its confusing to have already taged versions.
Maximilian Seesslen
15:21 campoTemplate Fehler #473 (Neu): There is no actual template for README.md: The README.md is about "campoTemplate" itself. Not very problematic because the templates
README would be quite empt... Maximilian Seesslen

13:27 Biwak Feature #470 (Erledigt): cmake function to select bootloader or application with bootloader: ... Maximilian Seesslen

11:51 Biwak Feature #466 (Erledigt): avoiding HAL_RCC_OscConfig does not work: Maximilian Seesslen
11:51 Biwak Feature #466 (Gelöst): avoiding HAL_RCC_OscConfig does not work: Maximilian Seesslen

Auch abrufbar als: Atom

Software