Projekt

Allgemein

Profil

Aktivität

von 14.01.2024 bis 12.02.2024

11.02.2024

15:30 Biwak Revision 41f1b1d1 (libbiwak3): draft
Redmine Admin
09:04 CANSwitch Test #489 (Neu): Send keep-alive
When changing illumination, an keep-alive event should be send. Maximilian Seesslen
08:51 CANSwitch Test #488 (Neu): Fading out before timeout
Maximilian Seesslen
08:50 CANSwitch Test #487 (Erledigt): Fading working
Maximilian Seesslen
07:43 CANSwitch Test #486 (In Bearbeitung): timeout warning
Maximilian Seesslen
07:43 CANSwitch Test #486 (Erledigt): timeout warning
Maximilian Seesslen
07:42 CANSwitch Test #486 (In Bearbeitung): timeout warning
Maximilian Seesslen
07:43 CANSwitch Test #485 (In Bearbeitung): Timeout
Maximilian Seesslen
07:43 CANSwitch Test #485 (Erledigt): Timeout
Maximilian Seesslen
07:40 CANSwitch Test #485 (Erledigt): Timeout
Maximilian Seesslen

06.02.2024

20:27 Biwak Revision d5c3a345 (libbiwak3): fixed typo
Redmine Admin

05.02.2024

22:56 Mainswitch Feature #347 (Erledigt): Send battery level via CAN
Maximilian Seesslen
22:54 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release
Maximilian Seesslen
22:51 Mainswitch Requirement #478 (Erledigt): LED States
Maximilian Seesslen
22:51 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low
Maximilian Seesslen
22:11 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout
Maximilian Seesslen
22:02 Mainswitch Requirement #482 (Erledigt): Pseudo-Off
Maximilian Seesslen
22:02 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown
Maximilian Seesslen
21:51 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown
When shutdown via button is triggered, a state has to wait untill the button is released.
Otherwise the device would...
Maximilian Seesslen

01.02.2024

18:37 Mainswitch Requirement #482 (Erledigt): Pseudo-Off
Due to non-functional WKUP, the first boards should not got to standby because
they can not be woken up any more.
...
Maximilian Seesslen
18:01 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low
Target voltage is 2,4V.
Check should be done every 15min.
Error should be send at 2,2V (end-point voltage of NiMH i...
Maximilian Seesslen
17:48 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout
After an configurable ammount of time, the device should automatically turn off.
The 'off' is an hard power-off. O...
Maximilian Seesslen
17:29 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release
I assumed that the device will immediately repower on when shutting down while button is still pressed.
Has to be ve...
Maximilian Seesslen
17:27 Mainswitch Requirement #478 (Erledigt): LED States
* The LED is permanent on in operational mode
* The LED is blinking normal when shutdown was initiated by holding bu...
Maximilian Seesslen

31.01.2024

21:38 Biwak Revision 09d79e9e (libbiwak3): added events header
Redmine Admin
21:35 Biwak Revision 51a99b70 (libbiwak3): downsize
Redmine Admin
21:34 Biwak Revision 6032b8c8 (libbiwak3): support for bootloader on cortex-m0
Redmine Admin
21:34 Biwak Revision 8b1766f3 (libbiwak3): heartbeat: moved events to logging
Redmine Admin

20.01.2024

12:51 Biwak Revision dd054097 (libbiwak3): fixed abort() and __aeabi_atexit()
Redmine Admin
12:17 Biwak Revision ff6d3f7c (libbiwak3): fixed merge conflict
Redmine Admin
12:03 Biwak Revision 47c89014 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel
Redmine Admin
11:59 Biwak Revision d260622f (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel
Redmine Admin
11:43 Biwak Revision 6f1ca9f4 (libbiwak3): Skip some initializations on applications started by custom bootloader
Redmine Admin
11:39 Biwak Revision 60d1d25a (libbiwak3): __aeabi_atexit: fixed parameters
Redmine Admin
11:25 Biwak Revision b519e03d (libbiwak3): log: draft for support for LEPTO_LOG_SILENT
Redmine Admin
11:25 Biwak Revision 1fd9bee4 (libbiwak3): retain: fixed support for BIWAK_I2C_RETAIN_ONLY
Redmine Admin
11:24 Biwak Revision 8074b78a (libbiwak3): can: re-added missing config structure
Redmine Admin
11:23 Biwak Revision 6b613e47 (libbiwak3): output: cleanup
Redmine Admin
11:22 Biwak Revision 1dc78512 (libbiwak3): input: make usage of signals configurable
Redmine Admin
11:21 Biwak Revision 188522c9 (libbiwak3): flash: use attribute instead of virtual functions for page sizes
Redmine Admin
11:16 Biwak Revision 087ad682 (libbiwak3): adc: use curly brace initializer for HAL struct
Redmine Admin

19.01.2024

17:47 campoTemplate Fehler #474 (Neu): Git history is not reset
Its confusing to have already taged versions.
Maximilian Seesslen
15:21 campoTemplate Fehler #473 (Neu): There is no actual template for README.md
The README.md is about "campoTemplate" itself. Not very problematic because the templates
README would be quite empt...
Maximilian Seesslen

17.01.2024

13:27 Biwak Feature #470 (Erledigt): cmake function to select bootloader or application with bootloader
... Maximilian Seesslen

16.01.2024

11:51 Biwak Feature #466 (Erledigt): avoiding HAL_RCC_OscConfig does not work
Maximilian Seesslen
11:51 Biwak Feature #466 (Gelöst): avoiding HAL_RCC_OscConfig does not work
Maximilian Seesslen

15.01.2024

19:50 Biwak Revision 6b7d97fb (libbiwak3): shrink binary size
Redmine Admin
 

Auch abrufbar als: Atom