Aktivität

von 10.01.2024 bis 08.02.2024

22:56 Mainswitch Feature #347 (Erledigt): Send battery level via CAN: Maximilian Seesslen
22:54 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release: Maximilian Seesslen
22:51 Mainswitch Requirement #478 (Erledigt): LED States: Maximilian Seesslen
22:51 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low: Maximilian Seesslen
22:11 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout: Maximilian Seesslen
22:02 Mainswitch Requirement #482 (Erledigt): Pseudo-Off: Maximilian Seesslen
22:02 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown: Maximilian Seesslen
21:51 Mainswitch Requirement #483 (Erledigt): Wait for button-release on shutdown: When shutdown via button is triggered, a state has to wait untill the button is released.
Otherwise the device would... Maximilian Seesslen

18:37 Mainswitch Requirement #482 (Erledigt): Pseudo-Off: Due to non-functional WKUP, the first boards should not got to standby because
they can not be woken up any more.
... Maximilian Seesslen
18:01 Mainswitch Requirement #481 (Erledigt): Send Event-error when battery is too low: Target voltage is 2,4V.
Check should be done every 15min.
Error should be send at 2,2V (end-point voltage of NiMH i... Maximilian Seesslen
17:48 Mainswitch Requirement #480 (Erledigt): Configurable auto-off timeout: After an configurable ammount of time, the device should automatically turn off.
The 'off' is an hard power-off. O... Maximilian Seesslen
17:29 Mainswitch Feature #479 (Erledigt): Check behaviour when device is immediately shut off before button release: I assumed that the device will immediately repower on when shutting down while button is still pressed.
Has to be ve... Maximilian Seesslen
17:27 Mainswitch Requirement #478 (Erledigt): LED States: * The LED is permanent on in operational mode
* The LED is blinking normal when shutdown was initiated by holding bu... Maximilian Seesslen

21:38 Biwak Revision 09d79e9e (libbiwak3): added events header: Redmine Admin
21:35 Biwak Revision 51a99b70 (libbiwak3): downsize: Redmine Admin
21:34 Biwak Revision 6032b8c8 (libbiwak3): support for bootloader on cortex-m0: Redmine Admin
21:34 Biwak Revision 8b1766f3 (libbiwak3): heartbeat: moved events to logging: Redmine Admin

12:51 Biwak Revision dd054097 (libbiwak3): fixed abort() and __aeabi_atexit(): Redmine Admin
12:17 Biwak Revision ff6d3f7c (libbiwak3): fixed merge conflict: Redmine Admin
12:03 Biwak Revision 47c89014 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
11:59 Biwak Revision d260622f (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
11:43 Biwak Revision 6f1ca9f4 (libbiwak3): Skip some initializations on applications started by custom bootloader: Redmine Admin
11:39 Biwak Revision 60d1d25a (libbiwak3): __aeabi_atexit: fixed parameters: Redmine Admin
11:25 Biwak Revision b519e03d (libbiwak3): log: draft for support for LEPTO_LOG_SILENT: Redmine Admin
11:25 Biwak Revision 1fd9bee4 (libbiwak3): retain: fixed support for BIWAK_I2C_RETAIN_ONLY: Redmine Admin
11:24 Biwak Revision 8074b78a (libbiwak3): can: re-added missing config structure: Redmine Admin
11:23 Biwak Revision 6b613e47 (libbiwak3): output: cleanup: Redmine Admin
11:22 Biwak Revision 1dc78512 (libbiwak3): input: make usage of signals configurable: Redmine Admin
11:21 Biwak Revision 188522c9 (libbiwak3): flash: use attribute instead of virtual functions for page sizes: Redmine Admin
11:16 Biwak Revision 087ad682 (libbiwak3): adc: use curly brace initializer for HAL struct: Redmine Admin

17:47 campoTemplate Fehler #474 (Neu): Git history is not reset: Its confusing to have already taged versions.
Maximilian Seesslen
15:21 campoTemplate Fehler #473 (Neu): There is no actual template for README.md: The README.md is about "campoTemplate" itself. Not very problematic because the templates
README would be quite empt... Maximilian Seesslen

13:25 Biwak Feature #466 (Erledigt): avoiding HAL_RCC_OscConfig does not work: objdump mainswitch -t | grep HAL
shows that the symbol is local (and additional global if forced).
Web tells that... Maximilian Seesslen

20:31 Biwak Revision 4a1bcc13 (libbiwak3): fixed merge conflict: Redmine Admin
20:30 Biwak Revision 8101de1f (libbiwak3): rtc: fix building for STM32F3: Redmine Admin
20:30 Biwak Revision ce945437 (libbiwak3): heartbeat: wind up warning timer on additional warning event: Redmine Admin

21:36 Biwak Revision 06f783ae (libbiwak3): updated changelog for v2.7.7: Redmine Admin
21:04 Biwak Revision d8c6c02c (libbiwak3): rework on log and heartbeat to support heartbeatevents: Redmine Admin
16:16 Biwak Revision 8e30fc2b (libbiwak3): draft: Redmine Admin
10:03 Biwak Revision 2168d9ed (libbiwak3): draft for events: Redmine Admin

21:43 Biwak Revision 20e021fe (libbiwak3): draft for events: Redmine Admin
21:25 Biwak Revision be06e9ec (libbiwak3): cleanup linker script: Redmine Admin

Auch abrufbar als: Atom

Software