Aktivität

von 12.11.2023 bis 11.12.2023

12:18 libcampo Feature #448 (Erledigt): hwdata: dump whole eeprom to bin files: Maximilian Seesslen
12:18 Biwak Feature #451 (Erledigt): support direct gpio init: Maximilian Seesslen
10:19 Biwak Feature #455 (Erledigt): change beckon behaviour: Maximilian Seesslen
10:17 Biwak Fehler #456 (Erledigt): link-script: section '.marker' is not marked with '(NOLOAD)': Maximilian Seesslen

18:45 libcampo Feature #457 (Erledigt): Track library release sizes: Unfortunately libraries are quite tied to matching versions of other libraries so those comparison is difficult to re... Maximilian Seesslen

16:44 Biwak Feature #452 (Abgewiesen): curly brace init for periphery typedefs in peripherie constuctors: This increased binary size daramtically. Maximilian Seesslen
16:34 Biwak Fehler #456 (Erledigt): link-script: section '.marker' is not marked with '(NOLOAD)': Test again if size is an problem then. 'rufa' is an good candidate. Should fail with missin '(NOLOAD)' and succeed wi... Maximilian Seesslen
16:04 Biwak Feature #455 (Erledigt): change beckon behaviour: * reduce warn-blink-time to 5 minutes
* introduce beckon-blinking (warning-blinking is confusing)
* beckon not poss... Maximilian Seesslen

11:21 Rufa Feature #454 (Neu): Verify smoothener: Smoothing and error detection was implemented.
Once the LED-Lamp was switched off, the noise was completely gone.
... Maximilian Seesslen

21:03 Biwak Feature #452 (Abgewiesen): curly brace init for periphery typedefs in peripherie constuctors: Should be more clean. Maximilian Seesslen
20:40 Biwak Feature #451 (Erledigt): support direct gpio init: arena can initialize gpios for periphery like CAN, SPI and I2C directly in the generated init-function.
The GPIOs ar... Maximilian Seesslen
15:54 liblepto Feature #450 (Erledigt): CRing: the m_top/m_bottom concept wastes one entry: Use an m_top/m_entries approach.
Would not be thread-save. Additional counter needed.
Round-Counter-Bit would help.... Maximilian Seesslen
15:48 liblepto Fehler #447 (Erledigt): crc32: the finalize step is integrated into calcCrc32(): Maximilian Seesslen

14:09 Biwak Feature #449 (Abgewiesen): Test "_end_data_flash": Setting an symbol to the first usable area has some problems on 16k devices when there is no free sectors.
_start_us... Maximilian Seesslen

18:08 libcampo Feature #448 (Erledigt): hwdata: dump whole eeprom to bin files: the readout can be implemented in gdb script.... Maximilian Seesslen
12:02 liblepto Fehler #447 (Erledigt): crc32: the finalize step is integrated into calcCrc32(): Probably all crc32 calculations in the EEPROMs are wrong.
Unit tests are needed: update_crc32, finalize_crc32...
... Maximilian Seesslen
10:39 liblepto Feature #446 (Erledigt): Catch CRC32 polynom for STM32F1: The result is different than current CRC32.
When unit-Tests for the device will get implemented, the corect algoryth... Maximilian Seesslen

09:36 Biwak Feature #440 (Erledigt): RFM69CW: remove magick from packet structure: Maximilian Seesslen

14:38 Campo Feature #144: implement hwdata stterm command: p/x (char [10])s
dump binary value foo (char[0x80])s
Maximilian Seesslen
13:48 libcampo Feature #419 (Erledigt): make .campo optional: Maximilian Seesslen
13:48 libcampo Feature #436 (Erledigt): Activate CVagus again: Maximilian Seesslen

13:57 libcampo Feature #419: make .campo optional: Before this the candis debug build is:
candis.bin: 114076
now it is:
candis.bin: 114420
But has a lot of new ... Maximilian Seesslen

15:43 Mito Feature #443 (Neu): implement validate mode: When the button is pressed, the mode shall change.
validate:
* check the cable layout only on start
* check perm... Maximilian Seesslen
15:32 Canbridge Feature #442 (Neu): Use listening mode: Try to save current. Maximilian Seesslen
15:31 Canbridge Feature #441 (Neu): Measure current consumption in RX mode: v0.1.0 does not use listen mode.
Will be interesting to campare with v0.2.0.
Maximilian Seesslen
11:47 Biwak Feature #440 (Erledigt): RFM69CW: remove magick from packet structure: The pre-magic is within the raw packet structure.
Just handle it like Post-Magic.
Reduce it to one byte to increase... Maximilian Seesslen
11:20 Canbridge Fehler #439 (Neu): Check RSSI instead of delaying: Before sending an package, the RSSI should be checked instead of fixed delay.
Maybe sending multiple CAN-Messages be... Maximilian Seesslen
11:07 Campo Feature #360 (Erledigt): Split further sensor library: This is done: libscapus
Maximilian Seesslen

18:04 libcampo Feature #436 (Erledigt): Activate CVagus again: An template class that already handles default stuff like storing Configuration/HWInfo, handling NMT.
Just the funct... Maximilian Seesslen

Auch abrufbar als: Atom

Software