Software

20.11.2023

15:43 Mito Feature #443 (Neu): implement validate mode

When the button is pressed, the mode shall change.
validate:
* check the cable layout only on start
* check perm... Maximilian Seesslen

15:32 Canbridge Feature #442 (Neu): Use listening mode

Try to save current. Maximilian Seesslen

15:31 Canbridge Feature #441 (Neu): Measure current consumption in RX mode

v0.1.0 does not use listen mode.
Will be interesting to campare with v0.2.0.
Maximilian Seesslen

11:47 Biwak Feature #440 (Erledigt): RFM69CW: remove magick from packet structure

The pre-magic is within the raw packet structure.
Just handle it like Post-Magic.
Reduce it to one byte to increase... Maximilian Seesslen

11:20 Canbridge Fehler #439 (Neu): Check RSSI instead of delaying

Before sending an package, the RSSI should be checked instead of fixed delay.
Maybe sending multiple CAN-Messages be... Maximilian Seesslen

11:07 Campo Feature #360 (Erledigt): Split further sensor library

This is done: libscapus
Maximilian Seesslen

16.11.2023

18:04 libcampo Feature #436 (Erledigt): Activate CVagus again

An template class that already handles default stuff like storing Configuration/HWInfo, handling NMT.
Just the funct... Maximilian Seesslen

27.10.2023

15:00 Canbridge Feature #429: Multi-Nodes

Manual: "5.5.7.2. Address Based" Maximilian Seesslen

14:31 Canbridge Feature #429 (Neu): Multi-Nodes

There should not only be point-to-point connections. Each device should talk to each device.
So a package contains:
... Maximilian Seesslen

23.10.2023

15:41 Canbridge Feature #428 (Neu): Retransmit Messages

* In starting phase there is an auto-tune which requires traffic
* There are at least some CRC errors
!canbridge.... Maximilian Seesslen