Aktivität - Software - Redmine

Aktivität

von 05.10.2022 bis 03.11.2022

03.11.2022

20:03 Biwak Revision e2981b4e (libbiwak3): updated fonts: Redmine Admin

02.11.2022

10:48 Minutnik eInk Feature #295 (Erledigt): have an alias name for the device: Maximilian Seesslen
10:48 Minutnik eInk Feature #295 (Erledigt): have an alias name for the device: Show either the serial number or the device alisa name on the display. Maximilian Seesslen
10:47 Minutnik eInk Feature #293 (Erledigt): Bringup: add calibration measurement functions: Maximilian Seesslen
10:46 Minutnik eInk Fehler #279 (Erledigt): ADC breaks after buzzer alarm: It was the STOP mode in delay() which reseted periphery. Maximilian Seesslen

01.11.2022

14:43 Biwak Revision f399dcba (libbiwak3): minor adaptions for stm32g4: Redmine Admin
14:08 Biwak Revision caae950d (libbiwak3): Merge branch 'master' of /media/mase/Backup/srv/git/src/libbiwak: Redmine Admin
14:08 Biwak Revision 06a4de9f (libbiwak3): can: implemented mailboxes: Redmine Admin

31.10.2022

19:32 Biwak Revision 0016871b (libbiwak3): draft: Redmine Admin

29.10.2022

17:48 Minutnik eInk Feature #293: Bringup: add calibration measurement functions: Actually not needed but implemented.
The values are quite close.
Serno.1: 4031
Serno.2: 4029
Maximilian Seesslen
14:38 Biwak Revision aff03233 (libbiwak3): Merge branch 'master' of /media/mase/Backup/srv/git/src/libbiwak: Redmine Admin
14:38 Biwak Revision bafc9123 (libbiwak3): stm32l1: don't use HAL_PWR_EnterSTOPMode() for delay() because it resets periphery: Redmine Admin

28.10.2022

14:42 Minutnik eInk Fehler #279: ADC breaks after buzzer alarm: This can be added to bringup tests. Maximilian Seesslen
14:39 Minutnik eInk Feature #293 (Erledigt): Bringup: add calibration measurement functions: Device should be able to calibrate itself and store the values in eeprom.
Maximilian Seesslen

25.10.2022

10:57 Minutnik eInk Fehler #286 (Abgewiesen): ADC breaks after buzzer alarm: Duplicate Maximilian Seesslen

19.10.2022

19:28 Biwak Revision 711a651c (libbiwak3): QSPI: further cleanup: Redmine Admin
19:18 Biwak Revision d3af20c9 (libbiwak3): QSPI: further cleanup: Redmine Admin
19:09 Biwak Revision 31d69872 (libbiwak3): QSPI: cleanup: Redmine Admin
18:48 Biwak Revision d02705df (libbiwak3): QSPI: memory mapping works: Redmine Admin
18:12 Biwak Revision 99935332 (libbiwak3): QSPI: writing/reading basically works: Redmine Admin

18.10.2022

17:21 Biwak Revision 049e887e (libbiwak3): draft for QSPI: Redmine Admin
13:05 Biwak Revision 7e58c1f2 (libbiwak3): reaft for QSPI: Redmine Admin

17.10.2022

15:53 Biwak Revision 89e4a886 (libbiwak3): intern eeprom: fix for stm32l4: Redmine Admin

15.10.2022

11:20 Minutnik eInk Fehler #279: ADC breaks after buzzer alarm: return ADC value 0 and set heartbeat led to error blinking. Maximilian Seesslen
11:19 Minutnik eInk Fehler #286 (Abgewiesen): ADC breaks after buzzer alarm: Reason unclear.
At least the "trouble"-mechanism of sensemux could be used to indicate the problem via LED.
Assum... Maximilian Seesslen
11:12 Biwak Revision 946b212e (libbiwak3): updated font: Redmine Admin
10:46 Minutnik eInk Fehler #283 (Erledigt): SPI Flash not working: Error in App-file; CS was not used. Maximilian Seesslen
10:13 Biwak Revision e1246a1d (libbiwak3): added header for input_ni: Redmine Admin
10:01 Biwak Feature #284 (Erledigt): implement sd-card support: Maximilian Seesslen
10:01 Biwak Feature #284 (Erledigt): implement sd-card support: Maximilian Seesslen
09:59 Biwak Revision 2cab6cf1 (libbiwak3): flash_cpi: dont have falsh size 1 on error: Redmine Admin

14.10.2022

11:11 Minutnik eInk Fehler #283 (Erledigt): SPI Flash not working: Test fails.
Size is "0".
Did the previous test report work?
Maximilian Seesslen
11:10 Minutnik eInk Feature #280 (Erledigt): Show Serial number in display: Maximilian Seesslen
11:09 Minutnik eInk Feature #281 (Erledigt): Display: Version: dont show SHA: Maximilian Seesslen
10:39 libcampo Feature #222 (Erledigt): bringup: add results with type info: Maximilian Seesslen

13.10.2022

22:23 libcampo Feature #259 (Erledigt): embed resources into binaries: Maximilian Seesslen
22:01 libcampo Feature #282 (Erledigt): gitversion: add compact version with dirty indication: Maximilian Seesslen
19:09 libcampo Feature #282 (Erledigt): gitversion: add compact version with dirty indication: Sometimes its enough to know that it is dirty and there are changes to version tag. But there might not be enough spa... Maximilian Seesslen
19:04 Minutnik eInk Feature #281 (Erledigt): Display: Version: dont show SHA: Not enough space. Implement a compact string in libcampo.
Maximilian Seesslen
19:02 Minutnik eInk Feature #280 (Erledigt): Show Serial number in display: I did not even mark the PCB :/ Maximilian Seesslen
18:55 Minutnik eInk Fehler #279 (Erledigt): ADC breaks after buzzer alarm: Reason unclear.
At least the "trouble"-mechanism of sensemux could be used to indicate the problem via LED.
Assum... Maximilian Seesslen

12.10.2022

22:40 libcampo Feature #278 (Erledigt): add hwdata layout v5.0: Maximilian Seesslen
11:40 libcampo Feature #278 (Erledigt): add hwdata layout v5.0: The layout is strange at the moment; redundant fields.
2Byte Article/Family (e.g. Minutnik-Oled, Minutnik-eInk, Mi... Maximilian Seesslen
20:40 Minutnik eInk Feature #274 (Erledigt): implement USB-Mode: Maximilian Seesslen
20:30 Biwak Revision 53c39d0a (libbiwak3): dont print warning when ADC could not start: Redmine Admin
20:29 Biwak Revision f99fbc96 (libbiwak3): fixed font: Redmine Admin

11.10.2022

20:07 Minutnik eInk Fehler #276 (Abgewiesen): GDB Breakpoints are not working: duplicate Maximilian Seesslen
16:32 Minutnik eInk Fehler #276 (Abgewiesen): GDB Breakpoints are not working: Can't write hwdata this way.
Working with debugger still works; i can hold and continue so pins are not completely m... Maximilian Seesslen
20:06 Minutnik eInk Fehler #277 (Erledigt): GDB Breakpoints are not working: "gdb_breakpoint_override hard" had to be set in openocd target file. Maximilian Seesslen
17:42 Minutnik eInk Fehler #277: GDB Breakpoints are not working: Depending on breakpoints gdb can call specific commands by itself;... Maximilian Seesslen
17:02 Minutnik eInk Fehler #277 (Erledigt): GDB Breakpoints are not working: Halting and continuing is working so general SWD-Pin-Configuration is not totally bad.
* Is openocd showing valid ... Maximilian Seesslen
16:28 Minutnik eInk Feature #255 (Erledigt): Start implementation of software: Maximilian Seesslen

09.10.2022

17:20 Biwak Revision 7c55ccd9 (libbiwak3): updated fonts: Redmine Admin
17:07 Biwak Revision 45be7dee (libbiwak3): updated fonts: Redmine Admin
16:42 Biwak Revision f5749aa0 (libbiwak3): updated fonts: Redmine Admin
16:35 Biwak Revision 7c2344d5 (libbiwak3): updated fonts and blinks: Redmine Admin

08.10.2022

15:46 Biwak Revision 67d4a1d0 (libbiwak3): draft for sd card: Redmine Admin
14:10 Biwak Revision 2c5647ff (libbiwak3): cleanup: Redmine Admin
13:57 Biwak Revision 443f6459 (libbiwak3): added freeze handler: Redmine Admin
11:23 Biwak Revision 1c60957a (libbiwak3): draft: Redmine Admin
10:09 Biwak Revision 3dc83ee9 (libbiwak3): cleanup: Redmine Admin
10:09 Biwak Revision b509461a (libbiwak3): beep-modes: added beep mode 'super short': Redmine Admin
10:08 Biwak Revision 3e0084ea (libbiwak3): wkup: use internal pulldown: Redmine Admin

06.10.2022

10:53 Minutnik eInk Feature #274 (Erledigt): implement USB-Mode: When device is running on USB, the behaviour should be different.
* Fancy intro
* No timers can be started
* LED... Maximilian Seesslen

05.10.2022

11:22 Minutnik eInk Feature #270 (Neu): Font in SPI-Flash: The drawText-function does not support fonts on SPI-Flash.
Not needed at the moment?
Maximilian Seesslen
10:55 Minutnik eInk Feature #255: Start implementation of software: Configuration in internal EEPROM missing. Maximilian Seesslen

Auch abrufbar als: Atom