Aktivität

von 08.05.2022 bis 06.06.2022

20:38 TCB Feature #196 (Erledigt): update pico libc to 1.7.7: Maximilian Seesslen
20:38 TCB Feature #195 (Erledigt): Update GCC to 12.1.0: Maximilian Seesslen

16:29 Campo Feature #144: implement hwdata stterm command: It uses the readHwInfo from Platform implementation. So storage location is not implied to the command.
readHwInfo v... Maximilian Seesslen
16:22 miniminutnik Fehler #193 (Erledigt): Command line not usable due to missing ram: updating libs fixed the issue.
Test for free memory? ... Maximilian Seesslen
14:17 TCB Feature #196 (Erledigt): update pico libc to 1.7.7: check if strtol() is still buggy.
CBringup from libcampo should perform some sanity checks/Unit tests.
Check if t... Maximilian Seesslen
14:15 TCB Feature #195 (Erledigt): Update GCC to 12.1.0: Its officially release now. Maximilian Seesslen
13:55 Campo Feature #194 (Erledigt): Move class tester to class "CBringup" in libcampo: The class may use some other libraries.
The bringup could also make some sanity-checks for libc.
(E.g. strtol("5") ... Maximilian Seesslen

22:03 miniminutnik Fehler #192 (Erledigt): MCU freezes: Maximilian Seesslen
17:12 miniminutnik Fehler #192 (Erledigt): MCU freezes: The MCU still freezes.
It looks like the floating UART-RX floods the MCU with messages which can not be stored.
Che... Maximilian Seesslen
21:56 miniminutnik Fehler #193 (Erledigt): Command line not usable due to missing ram: Device freezes Maximilian Seesslen

14:52 Biwak Feature #190 (Erledigt): add host tool canpong: Create an test tool for host that will receive can messages, increase the id by one and send it back.
Maximilian Seesslen

12:22 Sensemux SW Fehler #186: RTC does not store date: Reading software clearifies that this behaviour is by design.
I remember i fixed something; Check if there is an old... Maximilian Seesslen
11:19 Sensemux SW Fehler #186: RTC does not store date: https://www.stm32duino.com/viewtopic.php?t=775
It claims that STM32F1 just can not keep the date and user has to k... Maximilian Seesslen
11:04 Sensemux SW Fehler #186 (Neu): RTC does not store date: Time is working fine.
Seting date and time works fine. After reset the time is still valid but the date is zeroed.
... Maximilian Seesslen

14:43 CANDis Feature #185 (Neu): Evaluate RTC calibration: There is an little drift in the RTC.
|_. Value |_. Behaviour |_. Drift |
| 0 | Running to slow | ... Maximilian Seesslen
14:37 CANDis Fehler #184 (Erledigt): periodically sync RTC with extern RTC: Drift of intern RTC is quite big.
Perfom an sync every hour.
Maximilian Seesslen

12:21 Campo Feature #176: create custom targets to cmake file to create and deploy documents: Auto-Tagging is bad. Reduce functions;
- prepareTag
- createDocumentation
- uploadDocumentation
- createArchive
... Maximilian Seesslen

17:53 Campo Feature #176: create custom targets to cmake file to create and deploy documents: With Software this is fine.
In der Hardware entsteht die Doku i.d.R. nach der Inbetriebnahme.
Hochzahlen des Patc... Maximilian Seesslen
11:42 Campo Feature #176: create custom targets to cmake file to create and deploy documents: Little bit more complicated.
The open Changelogs may have to be merged (relay this feature)
Tags in the files hav... Maximilian Seesslen

Auch abrufbar als: Atom

Software