Aktivität

von 08.01.2022 bis 06.02.2022

17:04 Biwak Revision 22c4683e (libbiwak3): bring stm32f0 to life again: Redmine Admin

00:07 Biwak Revision e98aa372 (libbiwak3): biwakInit: low poer mode only for stm32l0: Redmine Admin

17:50 miniminutnik Feature #133 (Erledigt): implement corona mode again: The guideline changed.
Now the fentilation is every 20 minutes for 3 minutes.
The mode has only to be supported on ... Redmine Admin
16:17 miniminutnik Feature #132 (Abgewiesen): Lower down CPU speed: Also show CPU speed at startup.
This is more important than "Oh Tannenbaum".
Redmine Admin
16:15 miniminutnik Fehler #115: LEDs stay on some times: Check IRQ-Routine that biwak-interrupt is called before HAL-Handler.
Redmine Admin

15:43 miniminutnik Feature #129 (Erledigt): Firmware for different MCUs: Maximilian Seesslen
15:41 miniminutnik Fehler #115: LEDs stay on some times: Only happens when voltage is very low.
Maximilian Seesslen
14:52 Biwak Revision 4268a1f0 (libbiwak3): cleanup: Redmine Admin

14:10 Campo Fehler #130 (Erledigt): cmake gitversion.h is not correct: Shows old revision. Header is not created reliably.
Why has it to be created per binary target?
Create test scrip... Maximilian Seesslen
13:51 miniminutnik Feature #129 (Erledigt): Firmware for different MCUs: 32K version can have more melodies.
Binaries must be stored for both MCUs
Install all files via "make install".
Maximilian Seesslen
12:24 miniminutnik Feature #95 (Erledigt): use configuration in eeprom: Maximilian Seesslen
12:23 miniminutnik Feature #105 (Abgewiesen): implement error mode: Nope, just use default values. Maximilian Seesslen
12:21 miniminutnik Feature #104 (Erledigt): use HW-CRC for configuration check: Cool. Switchable (sw vs. hw) via arena app file. Maximilian Seesslen
12:19 miniminutnik Feature #94 (Erledigt): implement hwData: Maximilian Seesslen
11:48 Biwak Fehler #24 (Erledigt): get rid of periphery enums: Maximilian Seesslen
11:44 Biwak Revision 3dd70c62 (libbiwak3): [#24] got rid of periphery enums: Redmine Admin
10:36 Biwak Unterstützung #128 (Erledigt): Rework interrupts: Maximilian Seesslen

Auch abrufbar als: Atom

Software