Eval » Historie » Version 3
Redmine Admin, 02.12.2021 14:39
| 1 | 1 | Redmine Admin | h1. Eval |
|---|---|---|---|
| 2 | |||
| 3 | * FPC 10p cable for CANIO/Miniminutnik |
||
| 4 | * Buchsenleiste TX/RX/POW |
||
| 5 | 2 | Redmine Admin | * Boot/Reset button; gross |
| 6 | * 4Pin I2C-JST-Stecker |
||
| 7 | 1 | Redmine Admin | * TX/RX-LEDs (from adapter) |
| 8 | * Power-LED |
||
| 9 | * Target-LED |
||
| 10 | * Micro-USB |
||
| 11 | * Aussparung FPC-Stecker-Verrigelung |
||
| 12 | 3 | Redmine Admin | * 1mm Acryl schon sehr windig, siehe CANDis platten |
| 13 | 1 | Redmine Admin | * MCP2221 |
| 14 | * LDO 3V |
||
| 15 | 2 | Redmine Admin | * Schiebeschalter: I2C Power 5V/3V |
| 16 | 1 | Redmine Admin | * Schiebeschalter: power target |
| 17 | |||
| 18 | VUsb must have bypass capacitor between 0.22 and 0.47 μF. |
||
| 19 | When using internal LDO, GPIO and UART signals are 5V. We dont want this-> extern LDO |