Eval¶

• FPC 10p cable for CANIO/Miniminutnik
• Buchsenleiste TX/RX/POW
• Boot/Reset button; gross
• 4Pin I2C-JST-Stecker
• TX/RX-LEDs (from adapter)
• Power-LED
• Target-LED
• Micro-USB
• Aussparung FPC-Stecker-Verrigelung
• 1mm Acryl schon sehr windig, siehe CANDis platten
• MCP2221
• LDO 3V
• Schiebeschalter: I2C Power 5V/3V
• Schiebeschalter: power target

VUsb must have bypass capacitor between 0.22 and 0.47 μF.
When using internal LDO, GPIO and UART signals are 5V. We dont want this-> extern LDO