Software » Campo

h1. Intro

With the TDT-Protocol sensors can just send their values on the BUS without complex object catalogue.

An monitor-software is able to display values without knowing anything about the sensors or their configuration.

The CANId of sensors is actually their configurable ID or an global command.

CAN 2.0A: 0..0x7FF

CANOpen: 4 Bit Function code, 7 Bit Node-ID

Node-Id: 0..0x7F

Function-Code Mask: 0x780

h2. Function code

|_. Code |_. Decription    |_. Examples             |

| 0x0    | NMT             |                        |

| 0x1    | Alarms          |                        |

| 0x6    | Write object    | Set Date, illumination |

| 0x7    | Read object     | Get product codes      |

| 0x8    | Send object     | Send temperature       |

| 0x9    | data blob       |                        |

| 0xC    | log             |                        |

h1. IDs, ranges and commands

h2. CAN IDs

* 11-Bit-Identifier, (CAN 2.0A); 2048; 0x0 ... 0x7F0; 0x0 ... 0x7F with function code

* 29-Bit-Identifier, (CAN 2.0B); 0x20000000

|_. Range      |_. Decription           |_. Examples              |

| 0x01-0x0F    | Network Manager        | PC                      |

| 0x10-0x2F    | Active controller      | CANDis                  |

| 0x30-0x4F    | Actor                  | CANSwitch               |

| 0x50-0x6F    | Sending sensors        | Sensemux                |

| 0x70-0x7F    | Passive Sensors        | CANRec                  |

h2. Bbject structutre

|_. Size |_. Decription |_. Examples                                                       |

| 2      | Object       | Plain Sensor value; Set illumination                             |

| 1      | Data type    | Int, Float, Time, Date, Percent, Promil, Multipacket-String      |

| 1      | Unit         | Hz, °C, Time, Date, PWM, CAN-ID, Name, Description, Room         |

| 4      | Value        | 32Bit                                                            |

h2. Objects

|_. Code             |_. Description             |

| none               |                           |

| ambientLight       |                           |

| plantLight         |                           |

| multimediaSwitch   |                           |

| mainSwitch         |                           |

| date               |                           |

| time               |                           |

| dummy              |                           |

| plantSensor        |                           |

| plantSensor0       |                           |

| plantSensor1       |                           |

| plantSensor2       |                           |

| plantSensor3       |                           |

| plantSensor4       |                           |

| firmwareVersion    |                           |

| firmwareDate       |                           |

| hardwareRevision   |                           |

| hardwareDate       |                           |

| temperatureIntern  |                           |

| temperatureIntern1 |                           |

| temperatureIntern2 |                           |

| temperatureIntern3 |                           |

| temperatureIntern4 |                           |

| temperatureExtern  |                           |

| temperatureExtern1 |                           |

| temperatureExtern2 |                           |

| temperatureExtern3 |                           |

| temperatureExtern4 |                           |

| humidity           |                           |

| voc                |                           |

h2. Units

* Date: year 2B, month 1B, day 1B

* Time: hour 1B, minute 1B, second 1B, subsecond 1B

h1. Multipacket-Strings

|_. Address |_. Type          |

| 0x0       | Package count   |

| 0x1       | Package number  |

| 0x2..0x3  | Data            |

h1. Actuator introduction

When introduction is requested by system command, each device must send description for each subid.

h1. Example

h2. Turn on the lights

|_.Data   |_.Size   |_.Description                 |

|0x100    | 29 Bits | CAN-Id: Global command       |

|0x0      | 1 Byte  | Message-Type: Global command |

|0x0 	  | 1 Byte  | Sub-Id: Set ambient light    |

|0x1      | 1 Byte  | Data-Type: Integer           |

|0x1      | 1 Byte  | PWM: PWM permilli            |

|1000     | 4 Byte  | Value: Full Brightness       |

h1. Usecases

* simple actors can filter message to "Global actuator" messages, at least "system commands"

* There are 14 or 28 Filters on STM32Fs

h1. ID Assigning

Some STM32 have an internal 96-bit unique ID.

h1. V2

|_. Size |_. Decription |_. Examples                                                       |

| 1      | Packet type  | Standard TDT packet                                              |

| 1      | Sub-Id;      | Futher index; Sub-Sensor or more specifi kind of thing to be set |

| 1      | Data type    | Int, Float, Time, Date, Percent, Promil, Multipacket-String      |

| 1      | Unit         | Hz, °C, Time, Date, PWM, CAN-ID, Name, Description, Room         |

| 4      | Value        | 32Bit                                                            |

h2. Multimessage package

There should be the posssibillity to write the complete SPI-Flash even if it takes forever.

Not every slave needs to be able to send super big blocks. But every slave should be able to

send e.g. descriptions.

* Is order of messages an issue? Multiple Mailboxes.

|_. Size |_. Decription |_. Examples                                                       |

| 1      | Packet type  | Multimessage package                                             |

| 1      | count        | Number of packages                                               |

| 1      | number       | 0: value=data length in bytes                                    |

| 4      | Value        | 32Bit                                                            |

|_. Size |_. Decription |_. Examples                                                       |

| 1      | Packet type  | Multimessage package 2                                           |

| 1      | id           | Mailbox                                                          |

| 1      | number       | 0: value=data length in bytes                                    |

|        |              | 1: value=number of messages                                      |

|        |              | 2..x: data                                                       |

| 4      | Value        | 32Bit                                                            |

h2. Diagnose