Aktivität - Campo - Redmine

Aktivität

von 30.09.2024 bis 29.10.2024

29.10.2024

22:57 Biwak Revision a2c48f02 (libbiwak3): fixed compilation for host: Redmine Admin
22:10 Biwak Revision db7a0037 (libbiwak3): wkup: fixed compiling for host: Redmine Admin
22:04 Biwak Revision b0599af2 (libbiwak3): cmake: added wkup.cpp: Redmine Admin
20:54 Biwak Revision 4e7580ed (libbiwak3): fixed building for host: Redmine Admin
20:17 Biwak Revision ed2771d1 (libbiwak3): updated for building for host: Redmine Admin
15:17 Biwak Revision 93119153 (libbiwak3): linkerscript: fixed building miniminutnik: "*(.got*)" is needed to be present in the data section.
Otherwise linking breaks without expressive message. Redmine Admin

28.10.2024

23:07 Biwak Revision 3f84b753 (libbiwak3): remove declaration of pwm event loop: Redmine Admin
22:10 Biwak Revision ac52a7b2 (libbiwak3): fixed using config define: Redmine Admin
21:49 Biwak Revision e48b2005 (libbiwak3): cleanup delay functions: Redmine Admin

27.10.2024

06:42 Biwak Revision 8f686c94 (libbiwak3): disabled debug for retain.cpp: Redmine Admin

26.10.2024

15:16 Biwak Revision b7768d79 (libbiwak3): TSC2007: added CMD_SETUP, readInput(): Redmine Admin
11:53 Biwak Revision 9a8093a8 (libbiwak3): fixed building for stm32l4: Redmine Admin
11:47 Biwak Revision dd1fcc7f (libbiwak3): fixed building on stm32l1: Redmine Admin
11:44 Biwak Revision f4f9e5a9 (libbiwak3): fixed building on stm32l1: Redmine Admin
11:40 Biwak Revision 8efe17ca (libbiwak3): fixed building for STM32L0: Redmine Admin
11:31 Biwak Revision 2a7c28ad (libbiwak3): fixed building: Redmine Admin
11:20 Biwak Revision b5b66993 (libbiwak3): fixed building: Redmine Admin

24.10.2024

16:37 Biwak Revision cd04081f (libbiwak3): enabled rupdateFrequency() for STM32F3: No idea why this was disabled before. Redmine Admin
16:34 Biwak Revision a7b44273 (libbiwak3): formating: Redmine Admin
16:34 Biwak Revision 517978c3 (libbiwak3): added "alarm" blink mode: Redmine Admin
16:34 Biwak Revision c07cd8cb (libbiwak3): Fixed building for STM32F3X: adopted biwak changes Redmine Admin

14.10.2024

14:45 Biwak Revision f665a76c (libbiwak3): adopted biwak changes: Redmine Admin

12.10.2024

17:06 Biwak Revision 442a8ea6 (libbiwak3): fixed building on stm32g4: Redmine Admin
14:21 Biwak Revision 8b1be2f6 (libbiwak3): Implemented data event: In order to not miss any CAN messages the eventloop in the main application
has to get called at high frequency. Its ... Redmine Admin
13:15 Biwak Revision 1918e7a3 (libbiwak3): i2c: made interrupt optional: This saves some bytes. in master mode the interrupt is not needed at
all. Redmine Admin
13:15 Biwak Revision a465908a (libbiwak3): timer: made interrupt optional: saves some bytes Redmine Admin
13:14 Biwak Revision 01fbe0cb (libbiwak3): timer: remove member for frequency: This saves some bytes Redmine Admin
11:16 Biwak Revision 3518a901 (libbiwak3): Fader: dont use delta in calculation: Using deltas is saving some bytes. But its unprecise and errornous when
the cycle time is very short. Redmine Admin
11:14 Biwak Revision 9ccd08c2 (libbiwak3): added unit test for fader class: Redmine Admin

10.10.2024

19:48 Biwak Revision 2d07af93 (libbiwak3): Merge branch 'downsize' into devel: Redmine Admin
19:47 Biwak Revision a68b2289 (libbiwak3): Merge branch 'i2c_eeprom_fix' into devel: Redmine Admin
19:46 Biwak Revision 2c51fe53 (libbiwak3): fixed writing to eeprom overĺapping write page boundaries: Write page boundaries may not be crossed in a single i2c write instruction. Redmine Admin

08.10.2024

22:29 Biwak Revision 6e6aeda9 (libbiwak3): downsize: Redmine Admin
18:34 Biwak Feature #572 (Erledigt): Linker script: add ram area for vector table: At the moment RAM starts right after the ram-vector-table. This is ok but there is no section for vector table.
I as... Maximilian Seesslen

07.10.2024

14:41 Biwak Feature #570 (Erledigt): shrink binary size once again: The CTimer is a little bit nasty.
* let it work again; i forgot to set the instance somewhere.
* remove the memse... Maximilian Seesslen

06.10.2024

14:30 Biwak Revision 36c4cc30 (libbiwak3): Handle CAN TX error event: An event may result in another CAN message. To avoid infinite loop the error
event is only send once when the problem... Redmine Admin
12:40 Biwak Revision 7744fb6b (libbiwak3): Increased number of CAN rx buffers: 24 buffers has still problem when a lot of devices get scanned. Redmine Admin
12:12 Biwak Revision 7ed01d74 (libbiwak3): shrink bootloader by 0x400: Redmine Admin
11:28 Biwak Revision 3c41950b (libbiwak3): i2c: implemented waitBusy(): EEPROMS need some time to write data. A fixed delay is not very
performant.
Check if device is acknowdleging to verif... Redmine Admin

05.10.2024

17:14 Biwak Revision f1e47c2d (libbiwak3): flash intern: added writeData64(): Old implementation is not very clean. Flashing firmware is aligned by
default. Redmine Admin
17:13 Biwak Revision d926c301 (libbiwak3): linker script: drop some sections: Redmine Admin
17:13 Biwak Revision 2c1ab61a (libbiwak3): Option bytes: Flash does not need to be unlocked: Redmine Admin
17:12 Biwak Revision 0bbee05a (libbiwak3): introduced BIWAK_I2C_NODE_ABSENT: Some devices have fixed i2c setup. Redmine Admin
17:11 Biwak Revision 4c28cda2 (libbiwak3): remove exception function with string parameter: Not much sense, better try to save some bytes instead. Redmine Admin
17:09 Biwak Revision 93ea2951 (libbiwak3): Constify: Redmine Admin

04.10.2024

17:15 Biwak Revision 14f5571c (libbiwak3): fixed writing flash pages: Redmine Admin

03.10.2024

14:43 Biwak Revision 284690b6 (libbiwak3): polished log output: Redmine Admin

01.10.2024

15:33 Biwak Fehler #568 (Erledigt): flash-i2c: avoid delays; check for busy: According to microchip, the best way to check if the operation is finished is checking for "ACK".
Start start reding... Maximilian Seesslen

30.09.2024

10:34 Biwak Revision 9a33d2f4 (libbiwak3): Merge branch '500-qt-integration' of /data/srv/git/libbiwak into 500-qt-integration: Redmine Admin
10:31 Biwak Revision f4033d3c (libbiwak3): draft: Redmine Admin

Auch abrufbar als: Atom