Aktivität
von 30.09.2024 bis 29.10.2024
29.10.2024
- 22:57 Revision a2c48f02 (libbiwak3): fixed compilation for host
- 22:10 Revision db7a0037 (libbiwak3): wkup: fixed compiling for host
- 22:04 Revision b0599af2 (libbiwak3): cmake: added wkup.cpp
- 20:54 Revision 4e7580ed (libbiwak3): fixed building for host
- 20:17 Revision ed2771d1 (libbiwak3): updated for building for host
- 15:17 Revision 93119153 (libbiwak3): linkerscript: fixed building miniminutnik
- "*(.got*)" is needed to be present in the data section.
Otherwise linking breaks without expressive message.
28.10.2024
- 23:07 Revision 3f84b753 (libbiwak3): remove declaration of pwm event loop
- 22:10 Revision ac52a7b2 (libbiwak3): fixed using config define
- 21:49 Revision e48b2005 (libbiwak3): cleanup delay functions
27.10.2024
26.10.2024
- 15:16 Revision b7768d79 (libbiwak3): TSC2007: added CMD_SETUP, readInput()
- 11:53 Revision 9a8093a8 (libbiwak3): fixed building for stm32l4
- 11:47 Revision dd1fcc7f (libbiwak3): fixed building on stm32l1
- 11:44 Revision f4f9e5a9 (libbiwak3): fixed building on stm32l1
- 11:40 Revision 8efe17ca (libbiwak3): fixed building for STM32L0
- 11:31 Revision 2a7c28ad (libbiwak3): fixed building
- 11:20 Revision b5b66993 (libbiwak3): fixed building
24.10.2024
- 16:37 Revision cd04081f (libbiwak3): enabled rupdateFrequency() for STM32F3
- No idea why this was disabled before.
- 16:34 Revision a7b44273 (libbiwak3): formating
- 16:34 Revision 517978c3 (libbiwak3): added "alarm" blink mode
- 16:34 Revision c07cd8cb (libbiwak3): Fixed building for STM32F3X
- adopted biwak changes
14.10.2024
12.10.2024
- 17:06 Revision 442a8ea6 (libbiwak3): fixed building on stm32g4
- 14:21 Revision 8b1be2f6 (libbiwak3): Implemented data event
- In order to not miss any CAN messages the eventloop in the main application
has to get called at high frequency. Its ... - 13:15 Revision 1918e7a3 (libbiwak3): i2c: made interrupt optional
- This saves some bytes. in master mode the interrupt is not needed at
all. - 13:15 Revision a465908a (libbiwak3): timer: made interrupt optional
- saves some bytes
- 13:14 Revision 01fbe0cb (libbiwak3): timer: remove member for frequency
- This saves some bytes
- 11:16 Revision 3518a901 (libbiwak3): Fader: dont use delta in calculation
- Using deltas is saving some bytes. But its unprecise and errornous when
the cycle time is very short. - 11:14 Revision 9ccd08c2 (libbiwak3): added unit test for fader class
10.10.2024
- 19:48 Revision 2d07af93 (libbiwak3): Merge branch 'downsize' into devel
- 19:47 Revision a68b2289 (libbiwak3): Merge branch 'i2c_eeprom_fix' into devel
- 19:46 Revision 2c51fe53 (libbiwak3): fixed writing to eeprom overĺapping write page boundaries
- Write page boundaries may not be crossed in a single i2c write instruction.
08.10.2024
06.10.2024
- 14:30 Revision 36c4cc30 (libbiwak3): Handle CAN TX error event
- An event may result in another CAN message. To avoid infinite loop the error
event is only send once when the problem... - 12:40 Revision 7744fb6b (libbiwak3): Increased number of CAN rx buffers
- 24 buffers has still problem when a lot of devices get scanned.
- 12:12 Revision 7ed01d74 (libbiwak3): shrink bootloader by 0x400
- 11:28 Revision 3c41950b (libbiwak3): i2c: implemented waitBusy()
- EEPROMS need some time to write data. A fixed delay is not very
performant.
Check if device is acknowdleging to verif...
05.10.2024
- 17:14 Revision f1e47c2d (libbiwak3): flash intern: added writeData64()
- Old implementation is not very clean. Flashing firmware is aligned by
default. - 17:13 Revision d926c301 (libbiwak3): linker script: drop some sections
- 17:13 Revision 2c1ab61a (libbiwak3): Option bytes: Flash does not need to be unlocked
- 17:12 Revision 0bbee05a (libbiwak3): introduced BIWAK_I2C_NODE_ABSENT
- Some devices have fixed i2c setup.
- 17:11 Revision 4c28cda2 (libbiwak3): remove exception function with string parameter
- Not much sense, better try to save some bytes instead.
- 17:09 Revision 93ea2951 (libbiwak3): Constify
04.10.2024
03.10.2024
30.09.2024
Auch abrufbar als: Atom