Software » Campo » Biwak

28.10.2024

23:07 Revision 3f84b753 (libbiwak3): remove declaration of pwm event loop

Redmine Admin

22:10 Revision ac52a7b2 (libbiwak3): fixed using config define

Redmine Admin

21:49 Revision e48b2005 (libbiwak3): cleanup delay functions

Redmine Admin

27.10.2024

06:42 Revision 8f686c94 (libbiwak3): disabled debug for retain.cpp

Redmine Admin

26.10.2024

15:16 Revision b7768d79 (libbiwak3): TSC2007: added CMD_SETUP, readInput()

Redmine Admin

11:53 Revision 9a8093a8 (libbiwak3): fixed building for stm32l4

Redmine Admin

11:47 Revision dd1fcc7f (libbiwak3): fixed building on stm32l1

Redmine Admin

11:44 Revision f4f9e5a9 (libbiwak3): fixed building on stm32l1

Redmine Admin

11:40 Revision 8efe17ca (libbiwak3): fixed building for STM32L0

Redmine Admin

11:31 Revision 2a7c28ad (libbiwak3): fixed building

Redmine Admin

11:20 Revision b5b66993 (libbiwak3): fixed building

Redmine Admin

24.10.2024

16:37 Revision cd04081f (libbiwak3): enabled rupdateFrequency() for STM32F3

No idea why this was disabled before. Redmine Admin

16:34 Revision a7b44273 (libbiwak3): formating

Redmine Admin

16:34 Revision 517978c3 (libbiwak3): added "alarm" blink mode

Redmine Admin

16:34 Revision c07cd8cb (libbiwak3): Fixed building for STM32F3X

adopted biwak changes Redmine Admin

14.10.2024

14:45 Revision f665a76c (libbiwak3): adopted biwak changes

Redmine Admin

12.10.2024

17:06 Revision 442a8ea6 (libbiwak3): fixed building on stm32g4

Redmine Admin

14:21 Revision 8b1be2f6 (libbiwak3): Implemented data event

In order to not miss any CAN messages the eventloop in the main application
has to get called at high frequency. Its ... Redmine Admin

13:15 Revision 1918e7a3 (libbiwak3): i2c: made interrupt optional

This saves some bytes. in master mode the interrupt is not needed at
all. Redmine Admin

13:15 Revision a465908a (libbiwak3): timer: made interrupt optional

saves some bytes Redmine Admin

13:14 Revision 01fbe0cb (libbiwak3): timer: remove member for frequency

This saves some bytes Redmine Admin

11:16 Revision 3518a901 (libbiwak3): Fader: dont use delta in calculation

Using deltas is saving some bytes. But its unprecise and errornous when
the cycle time is very short. Redmine Admin

11:14 Revision 9ccd08c2 (libbiwak3): added unit test for fader class

Redmine Admin

10.10.2024

19:48 Revision 2d07af93 (libbiwak3): Merge branch 'downsize' into devel

Redmine Admin

19:47 Revision a68b2289 (libbiwak3): Merge branch 'i2c_eeprom_fix' into devel

Redmine Admin

19:46 Revision 2c51fe53 (libbiwak3): fixed writing to eeprom overĺapping write page boundaries

Write page boundaries may not be crossed in a single i2c write instruction. Redmine Admin

08.10.2024

22:29 Revision 6e6aeda9 (libbiwak3): downsize

Redmine Admin

18:34 Feature #572 (Neu): Linker script: add ram area vor vector table

At the moment RAM starts right after the ram-vector-table. This is ok but there is no section for vector table.
I as... Maximilian Seesslen

07.10.2024

14:41 Feature #570 (Erledigt): shrink binary size once again

The CTimer is a little bit nasty.
* let it work again; i forgot to set the instance somewhere.
* remove the memse... Maximilian Seesslen

06.10.2024

14:30 Revision 36c4cc30 (libbiwak3): Handle CAN TX error event

An event may result in another CAN message. To avoid infinite loop the error
event is only send once when the problem... Redmine Admin

12:40 Revision 7744fb6b (libbiwak3): Increased number of CAN rx buffers

24 buffers has still problem when a lot of devices get scanned. Redmine Admin

12:12 Revision 7ed01d74 (libbiwak3): shrink bootloader by 0x400

Redmine Admin

11:28 Revision 3c41950b (libbiwak3): i2c: implemented waitBusy()

EEPROMS need some time to write data. A fixed delay is not very
performant.
Check if device is acknowdleging to verif... Redmine Admin

05.10.2024

17:14 Revision f1e47c2d (libbiwak3): flash intern: added writeData64()

Old implementation is not very clean. Flashing firmware is aligned by
default. Redmine Admin

17:13 Revision d926c301 (libbiwak3): linker script: drop some sections

Redmine Admin

17:13 Revision 2c1ab61a (libbiwak3): Option bytes: Flash does not need to be unlocked

Redmine Admin

17:12 Revision 0bbee05a (libbiwak3): introduced BIWAK_I2C_NODE_ABSENT

Some devices have fixed i2c setup. Redmine Admin

17:11 Revision 4c28cda2 (libbiwak3): remove exception function with string parameter

Not much sense, better try to save some bytes instead. Redmine Admin

17:09 Revision 93ea2951 (libbiwak3): Constify

Redmine Admin

04.10.2024

17:15 Revision 14f5571c (libbiwak3): fixed writing flash pages

Redmine Admin

03.10.2024

14:43 Revision 284690b6 (libbiwak3): polished log output

Redmine Admin

01.10.2024

15:33 Fehler #568 (Erledigt): flash-i2c: avoid delays; check for busy

According to microchip, the best way to check if the operation is finished is checking for "ACK".
Start start reding... Maximilian Seesslen

30.09.2024

10:34 Revision 9a33d2f4 (libbiwak3): Merge branch '500-qt-integration' of /data/srv/git/libbiwak into 500-qt-integration

Redmine Admin

10:31 Revision f4033d3c (libbiwak3): draft

Redmine Admin

29.09.2024

11:04 Revision 5b72421c (libbiwak3): updated changelog for v2.9.0

Redmine Admin

07:33 Revision dbf32945 (libbiwak3): moved imago from campo to lepto

Redmine Admin

06:21 Revision 22da804e (libbiwak3): support dummy spi for host tests

Redmine Admin

06:13 Revision 2da4d7eb (libbiwak3): linux: added eSpiMode3Mhz

Redmine Admin

05:47 Revision 3b1c5969 (libbiwak3): qt-board: add dummy support for SPI

Redmine Admin