Software » Campo » Biwak

14.10.2024

14:45 Revision f665a76c (libbiwak3): adopted biwak changes

Redmine Admin

12.10.2024

17:06 Revision 442a8ea6 (libbiwak3): fixed building on stm32g4

Redmine Admin

14:21 Revision 8b1be2f6 (libbiwak3): Implemented data event

In order to not miss any CAN messages the eventloop in the main application
has to get called at high frequency. Its ... Redmine Admin

13:15 Revision 1918e7a3 (libbiwak3): i2c: made interrupt optional

This saves some bytes. in master mode the interrupt is not needed at
all. Redmine Admin

13:15 Revision a465908a (libbiwak3): timer: made interrupt optional

saves some bytes Redmine Admin

13:14 Revision 01fbe0cb (libbiwak3): timer: remove member for frequency

This saves some bytes Redmine Admin

11:16 Revision 3518a901 (libbiwak3): Fader: dont use delta in calculation

Using deltas is saving some bytes. But its unprecise and errornous when
the cycle time is very short. Redmine Admin

11:14 Revision 9ccd08c2 (libbiwak3): added unit test for fader class

Redmine Admin

10.10.2024

19:48 Revision 2d07af93 (libbiwak3): Merge branch 'downsize' into devel

Redmine Admin

19:47 Revision a68b2289 (libbiwak3): Merge branch 'i2c_eeprom_fix' into devel

Redmine Admin

19:46 Revision 2c51fe53 (libbiwak3): fixed writing to eeprom overĺapping write page boundaries

Write page boundaries may not be crossed in a single i2c write instruction. Redmine Admin

08.10.2024

22:29 Revision 6e6aeda9 (libbiwak3): downsize

Redmine Admin

18:34 Feature #572 (Neu): Linker script: add ram area vor vector table

At the moment RAM starts right after the ram-vector-table. This is ok but there is no section for vector table.
I as... Maximilian Seesslen

07.10.2024

14:41 Feature #570 (Erledigt): shrink binary size once again

The CTimer is a little bit nasty.
* let it work again; i forgot to set the instance somewhere.
* remove the memse... Maximilian Seesslen

06.10.2024

14:30 Revision 36c4cc30 (libbiwak3): Handle CAN TX error event

An event may result in another CAN message. To avoid infinite loop the error
event is only send once when the problem... Redmine Admin

12:40 Revision 7744fb6b (libbiwak3): Increased number of CAN rx buffers

24 buffers has still problem when a lot of devices get scanned. Redmine Admin

12:12 Revision 7ed01d74 (libbiwak3): shrink bootloader by 0x400

Redmine Admin

11:28 Revision 3c41950b (libbiwak3): i2c: implemented waitBusy()

EEPROMS need some time to write data. A fixed delay is not very
performant.
Check if device is acknowdleging to verif... Redmine Admin

05.10.2024

17:14 Revision f1e47c2d (libbiwak3): flash intern: added writeData64()

Old implementation is not very clean. Flashing firmware is aligned by
default. Redmine Admin

17:13 Revision d926c301 (libbiwak3): linker script: drop some sections

Redmine Admin

17:13 Revision 2c1ab61a (libbiwak3): Option bytes: Flash does not need to be unlocked

Redmine Admin

17:12 Revision 0bbee05a (libbiwak3): introduced BIWAK_I2C_NODE_ABSENT

Some devices have fixed i2c setup. Redmine Admin

17:11 Revision 4c28cda2 (libbiwak3): remove exception function with string parameter

Not much sense, better try to save some bytes instead. Redmine Admin

17:09 Revision 93ea2951 (libbiwak3): Constify

Redmine Admin

04.10.2024

17:15 Revision 14f5571c (libbiwak3): fixed writing flash pages

Redmine Admin

03.10.2024

14:43 Revision 284690b6 (libbiwak3): polished log output

Redmine Admin

01.10.2024

15:33 Fehler #568 (Erledigt): flash-i2c: avoid delays; check for busy

According to microchip, the best way to check if the operation is finished is checking for "ACK".
Start start reding... Maximilian Seesslen

30.09.2024

10:34 Revision 9a33d2f4 (libbiwak3): Merge branch '500-qt-integration' of /data/srv/git/libbiwak into 500-qt-integration

Redmine Admin

10:31 Revision f4033d3c (libbiwak3): draft

Redmine Admin

29.09.2024

11:04 Revision 5b72421c (libbiwak3): updated changelog for v2.9.0

Redmine Admin

07:33 Revision dbf32945 (libbiwak3): moved imago from campo to lepto

Redmine Admin

06:21 Revision 22da804e (libbiwak3): support dummy spi for host tests

Redmine Admin

06:13 Revision 2da4d7eb (libbiwak3): linux: added eSpiMode3Mhz

Redmine Admin

05:47 Revision 3b1c5969 (libbiwak3): qt-board: add dummy support for SPI

Redmine Admin

28.09.2024

18:26 Revision 9f0453b3 (libbiwak3): handle config defines corectly

Redmine Admin

18:09 Revision b63d4a47 (libbiwak3): proper use of config defines

Redmine Admin

16:57 Revision 6633ee23 (libbiwak3): fixed config define

Redmine Admin

13:52 Revision 19ada3d4 (libbiwak3): use conpfig macros correctly

Redmine Admin

13:18 Revision 376b5b64 (libbiwak3): tests: check for some config macros

Redmine Admin

12:44 Revision e9486863 (libbiwak3): force git vcersion

Redmine Admin

12:40 Revision e240087a (libbiwak3): force git vcersion

Redmine Admin

12:31 Revision ba411717 (libbiwak3): force git vcersion

Redmine Admin

12:31 Revision 7f34bc14 (libbiwak3): force git vcersion

Redmine Admin

12:30 Revision 9a624188 (libbiwak3): force git vcersion

Redmine Admin

12:25 Revision 9e1af1ca (libbiwak3): fixed missing header

Redmine Admin

11:41 Revision d33895cc (libbiwak3): added configuration check

Redmine Admin

27.09.2024

20:47 Revision 03ccb5e6 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

20:47 Revision d8364192 (libbiwak3): log: use ELogCode

Redmine Admin

20:31 Revision 1a11f076 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

20:26 Revision a58ad193 (libbiwak3): fixed merge conflict

Redmine Admin

20:21 Revision c9829765 (libbiwak3): call logHeartBeat() in logEventLoop()

Redmine Admin

20:18 Revision 544bc340 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

19:55 Revision c6118352 (libbiwak3): added tests for heartbeat behaviour

Redmine Admin

19:55 Revision df015962 (libbiwak3): fixes for new heartbeat implementation

Redmine Admin

19:53 Revision c5d3ead1 (libbiwak3): added lLogInfo()

Used to check which implementation is actually used. Tests have to
verify thatbiwaks implementation ius active. Redmine Admin

26.09.2024

21:09 Revision 8f2f232a (libbiwak3): [#567] clean up Log-Heartbeat code

Avoid injecting the log event to ELogCategory.
Replace ELogCategory by ELogCode which also contains category and even... Redmine Admin

25.09.2024

16:40 Revision 57e90eba (libbiwak3): log: fixed usage of config macros

Redmine Admin

16:39 Revision 3f615f0d (libbiwak3): dummy support for option bytes on host system

Redmine Admin

15:03 Revision fcd51cf7 (libbiwak3): fixed handling of configuration macros

Redmine Admin

13:59 Feature #567 (Neu): Clean up heart-beat-LED-code

There is a mess up.
void hbEvent( ELogCategory category ): always a dummy
void heartbeatTrampoline(CHeartBeat::ES... Maximilian Seesslen

13:06 Revision 2f135983 (libbiwak3): fixed config macro handling

Redmine Admin

24.09.2024

22:59 Revision 8528c219 (libbiwak3): fixed merge conflict

Redmine Admin

22:58 Revision d016287d (libbiwak3): i2c_slave: use config macros correctly

Redmine Admin

22:14 Revision ca297574 (libbiwak3): fixed merge conflict

Redmine Admin

22:04 Revision 3de389be (libbiwak3): draft

Redmine Admin

22:03 Revision 2ac95ce2 (libbiwak3): added biwakPrintCompilerInfo()

Redmine Admin

22:00 Revision 743be98c (libbiwak3): uart: check for missing "AdvancedInit" in typedef

Redmine Admin

21:09 Revision c02dc271 (libbiwak3): fixed usagew of config macro

Redmine Admin

21:08 Revision 1f1db688 (libbiwak3): fixed log output

Redmine Admin

19:12 Revision 2fe99826 (libbiwak3): more expressive error output

Redmine Admin

18:41 Revision a9648563 (libbiwak3): cmake: stop biwak about missing config when surpressed

Redmine Admin

17:43 Revision 337a8010 (libbiwak3): fixed handling configuration macros

Redmine Admin

17:43 Revision d02662a2 (libbiwak3): cmake: depend all soucre files to config header

Redmine Admin

23.09.2024

15:39 Revision 70e0c1a2 (libbiwak3): log: fixed header for default config

Redmine Admin

15:10 Revision 41d455e0 (libbiwak3): fixed usage of BIWAK_USE_INPUT_SIGNAL

Redmine Admin

14:29 Revision 5a7d644e (libbiwak3): cmake: cleanup

Redmine Admin

14:13 Revision 10f3698e (libbiwak3): fixed test for logging

Redmine Admin

14:04 Revision 7e576f5a (libbiwak3): cmake: include config header automatically

Redmine Admin

09:51 Revision a2f1fb43 (libbiwak3): i2c: use leptos IS_ENABLED

Redmine Admin

09:51 Revision b2409cf4 (libbiwak3): constify

Redmine Admin