Aktivität - Biwak - Redmine

Aktivität

von 30.11.2023 bis 29.12.2023

29.12.2023

11:38 Revision 8b05e477 (libbiwak3): RTC: fixed building for STM32F1: Redmine Admin
11:08 Revision 8be1c1d3 (libbiwak3): RTC: initialize missing init variables: Redmine Admin
09:15 Revision 5952c5f6 (libbiwak3): fixed merge conflict: Redmine Admin
08:48 Revision 646ece01 (libbiwak3): Fixed barel-organ to play melody: At least STM32G4:
adjusting frequencie:
If the period register already was above the new set one,
timer wont hit it f... Redmine Admin
08:44 Revision 2aaecc0c (libbiwak3): aded tools.cpp e.g. to dump EEPROM: Redmine Admin

28.12.2023

12:03 Revision c58b481b (libbiwak3): updated changelog for v2.7.6: Redmine Admin
11:28 Revision d3bd33ac (libbiwak3): heartbeat: fixed permanent calm: Redmine Admin
09:08 Revision 6fc4441f (libbiwak3): can: optionaly use precalculated prescaler/segment values: Redmine Admin
09:07 Revision 7b6bbf87 (libbiwak3): heartbeat: made events configurable: Redmine Admin
09:06 Revision 7cd3f489 (libbiwak3): i2c: made retries configurable: Redmine Admin

24.12.2023

14:43 Revision 7f84f0b8 (libbiwak3): implemented lEvent: Redmine Admin

22.12.2023

18:07 Revision b1ba3d61 (libbiwak3): mcp7940: solved problems on single unit: One device had problems with i2c. Adjusting i2c timing was needed.
CMcp7940 still had problems. Retries in I2C commun... Redmine Admin
13:56 Revision f57cee83 (libbiwak3): i2c: fixed timing for candis/stm32g441: Redmine Admin
11:40 Revision 78941818 (libbiwak3): removed missplaced delay: Redmine Admin
10:50 Revision d0710209 (libbiwak3): updated changelog for v2.7.5: Redmine Admin
10:18 Revision 398fc557 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
10:18 Revision f528ddc7 (libbiwak3): systick: added forceEventLoop(): Redmine Admin
10:12 Revision 7eb8bb44 (libbiwak3): CRfm69cw: enabled constructor again: Redmine Admin
10:07 Revision 1c334d8d (libbiwak3): fixed merge conflict: Redmine Admin
10:02 Revision 83793807 (libbiwak3): draft: Redmine Admin
09:40 Revision 4bed7932 (libbiwak3): flash_intern: allow compiling on stm32l1: Redmine Admin
09:28 Revision ae27abbc (libbiwak3): adopted biwak changes: Redmine Admin
09:26 Revision 787c0bec (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
09:24 Revision a0c0ff29 (libbiwak3): fixed log output: Redmine Admin
05:35 Revision 23a63d98 (libbiwak3): draft: Redmine Admin
05:34 Revision 4b4f02ff (libbiwak3): CAN: renamed m_buffer to m_rxBuffer: Redmine Admin

21.12.2023

13:45 Revision 866d5456 (libbiwak3): flashi2c: added dump(): Redmine Admin
12:37 Revision 24b6d5ba (libbiwak3): info: show real flash size instead of linkerscript info: Redmine Admin
12:36 Revision c384472b (libbiwak3): i2cslave: added write delay: Slow EEPROM needs this delay (sanswitch #1) Redmine Admin

20.12.2023

14:00 Revision d0847bb7 (libbiwak3): updated changelog for v2.7.4: Redmine Admin
13:39 Revision 35e46d8c (libbiwak3): draft: Redmine Admin
13:35 Revision 4da5e443 (libbiwak3): draft: Redmine Admin
13:21 Revision 3af0b483 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
13:19 Revision 119520cb (libbiwak3): flash: support for memory mapped configurable: Redmine Admin
13:18 Revision 52ad2d20 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
13:15 Revision bc59cb70 (libbiwak3): flash_intern: draft rework: Redmine Admin
13:08 Revision 713ed129 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
13:08 Revision 7d3c6974 (libbiwak3): usb: avoid freezing device when USB is not connected and stdio is mapped to USB: Redmine Admin
10:48 Revision e6e63867 (libbiwak3): usb: polish: Redmine Admin
10:44 Revision f49bf776 (libbiwak3): usb: reduced warning level of debug output: Redmine Admin
10:31 Revision 6d13c9a4 (libbiwak3): added doc/usb.txt: Redmine Admin
10:30 Revision 17e9c30a (libbiwak3): fixed usb for phonybl: Redmine Admin

19.12.2023

10:15 Revision 7504d43a (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
10:14 Revision 4603c4a7 (libbiwak3): reduced binary size: Redmine Admin
10:13 Revision b03d8f6b (libbiwak3): cleanup: Redmine Admin

18.12.2023

21:35 Revision 097f7d27 (libbiwak3): fixed heartbeat function names to not clash with QT: Redmine Admin
18:49 Revision 1e5463be (libbiwak3): spi: reduced methods: Redmine Admin
18:48 Revision 67db8d07 (libbiwak3): draft: Redmine Admin
18:48 Revision dbb0e6fa (libbiwak3): interrupt-objects: removed counter: Redmine Admin
18:46 Revision e1e2bc83 (libbiwak3): log: made autoflush feature configurable: Redmine Admin
18:45 Revision 1dafa5a7 (libbiwak3): heartbeat: shrink binary size: Redmine Admin

16.12.2023

21:10 Revision b1aa1142 (libbiwak3): reduced debug ouput and dummy functions: Redmine Admin
10:02 Revision e33481dc (libbiwak3): updated changelog for v2.7.3: Redmine Admin
10:01 Revision 0b6c7875 (libbiwak3): draft: Redmine Admin
08:27 Revision e0e5455c (libbiwak3): fixed calm(): Redmine Admin
08:12 Revision 0251d69b (libbiwak3): fixed building for x86: Redmine Admin

15.12.2023

18:52 Revision 09d3a822 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
18:46 Revision 9ef1f37e (libbiwak3): format: Redmine Admin
18:39 Revision ca17fca6 (libbiwak3): added downsized logs: Redmine Admin
18:39 Revision b726df3a (libbiwak3): flash: dont support both acquire direction: Redmine Admin
18:38 Revision e87b68fb (libbiwak3): fader: remove m_active member and use 'int' as fader type: Redmine Admin
18:37 Revision 0eb1fa78 (libbiwak3): flash: dont support both acquire direction: Redmine Admin
14:00 Revision f1a04ed8 (libbiwak3): cleanup: Redmine Admin
10:08 Revision 9e74bb65 (libbiwak3): draft: Redmine Admin

14.12.2023

22:07 Revision 6d75f019 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
22:07 Revision 09f14a97 (libbiwak3): flash_file: added close() method: Redmine Admin
22:07 Revision c4f2cc3c (libbiwak3): cleanup: Redmine Admin
21:32 Revision 23ceb722 (libbiwak3): flash-intrern: use symbol _start_user_flash from biwak linker script again: Redmine Admin
21:30 Revision 68db0885 (libbiwak3): fixed retain: counter value '0' is considered as 'invalid' value.
Storing- and searching functions have to consider this. Redmine Admin
21:16 Revision 5db022fc (libbiwak3): CHeartBeat: avoid blowing up code size when class is not even used: Redmine Admin
20:40 Revision 1c4949cf (libbiwak3): fixed output blinking: Redmine Admin
19:59 Revision 91a5d858 (libbiwak3): remove unneeded code: Redmine Admin
19:56 Revision cdace429 (libbiwak3): linker-script: avoid miss-overflow of flash size: Redmine Admin

13.12.2023

20:07 Revision 485dbb88 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
10:31 Revision bb45a42a (libbiwak3): output: blink-modes: moved defines to generic header: Redmine Admin

12.12.2023

21:24 Revision 1941d931 (libbiwak3): output-blink-modes: moved defines: Redmine Admin
20:22 Revision 971eac8b (libbiwak3): iostream: removed sendbuffer: Redmine Admin
20:17 Revision 23649692 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
20:16 Revision c15eec80 (libbiwak3): gpio: added comments about STM32F1 gpio remapping: Redmine Admin
20:14 Revision bd48adf8 (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel: Redmine Admin
20:13 Revision 2a98ab62 (libbiwak3): cleanup: Redmine Admin
20:10 Revision c8aef976 (libbiwak3): output: avoid magic numbers in beep mode handling: Redmine Admin

11.12.2023

22:33 Revision 8decf2a3 (libbiwak3): fixed using of CRC32 unit: Redmine Admin
20:20 Revision f35174ff (libbiwak3): dfebug retain: Redmine Admin
20:18 Revision 892f06d3 (libbiwak3): CRC: fixed crc finalize: Redmine Admin
13:56 Revision 5e3fd959 (libbiwak3): added setMode( const SGpioMode& ) again: Redmine Admin
13:24 Revision e7006ad6 (libbiwak3): removed deinitAllGpios() declaration: Redmine Admin
12:50 Revision ea1441c1 (libbiwak3): fixed i2c for stm32l1: Redmine Admin

10.12.2023

12:18 Feature #451 (Erledigt): support direct gpio init: Maximilian Seesslen
10:19 Feature #455 (Erledigt): change beckon behaviour: Maximilian Seesslen
10:17 Fehler #456 (Erledigt): link-script: section '.marker' is not marked with '(NOLOAD)': Maximilian Seesslen
07:33 Revision af75fd27 (libbiwak3): draft: Redmine Admin
07:33 Revision 9e2a9e9a (libbiwak3): i2c-dlave: fixed debug output: Redmine Admin
05:45 Revision cc9dcdee (libbiwak3): added retain.txt: Redmine Admin
05:19 Revision 8cec541a (libbiwak3): linker-script: made .marker-section NOLOAD: Redmine Admin

09.12.2023

17:50 Revision 3eee5cdb (libbiwak3): CFader: use lr-timer instead of hr-timer: Redmine Admin
17:07 Revision 8c89ae1f (libbiwak3): added dummy functions for hr-timer when hr-timer is disabled: Redmine Admin
16:53 Revision eca7c075 (libbiwak3): added dummy function for hr-timer functions when hr is disabled: Redmine Admin
15:25 Revision 0db5ac09 (libbiwak3): heartbeat: use different beckon blinking: Redmine Admin
12:59 Revision 629e4600 (libbiwak3): fixed i2c for STM32F1: Redmine Admin
12:45 Revision 2a1e76be (libbiwak3): fixed building FDCAN: Redmine Admin
12:34 Revision 44730cf1 (libbiwak3): fixed building for x86: Redmine Admin
12:33 Revision 33e25476 (libbiwak3): fixed building for x86: Redmine Admin
11:10 Revision 879da485 (libbiwak3): draft: Redmine Admin
10:57 Revision 535bf94f (libbiwak3): splitted gpio modes to compile unit: Redmine Admin
10:45 Revision 7a2f8d92 (libbiwak3): Revert "gpio: reduced binary size": This reverts commit f22985357d87b628b6bfdaef8ae3a2495cac2cb5. Redmine Admin
09:20 Revision 4d818244 (libbiwak3): made supporting high-res-timer default: Redmine Admin
08:58 Revision 60977c51 (libbiwak3): fixed merge conflicts: Redmine Admin
08:48 Revision a55db117 (libbiwak3): make some features configurable: Redmine Admin
08:33 Revision b08c8d3e (libbiwak3): fixed merge conflict: Redmine Admin
07:43 Revision 2a426a87 (libbiwak3): updated changelog for v2.7.2: Redmine Admin

08.12.2023

19:41 Revision 0bf70cae (libbiwak3): cleanup: Redmine Admin
19:03 Revision f2298535 (libbiwak3): gpio: reduced binary size: Redmine Admin
18:34 Revision b2f10754 (libbiwak3): further curly brace inits: Redmine Admin
18:07 Revision 3aa9b818 (libbiwak3): fixed merge conflict: Redmine Admin
18:05 Revision a60ea72c (libbiwak3): i2c: use curly brace init: Redmine Admin
18:04 Revision b5b3ea6a (libbiwak3): [451] avoid init of GPIOs for periphery: Redmine Admin
15:35 Revision 698a0011 (libbiwak3): crc, i2c: use curly brace init: Redmine Admin
15:35 Revision 20ad93fd (libbiwak3): timer: changed initialization behaviour: Redmine Admin
15:01 Revision 9ecb76ae (libbiwak3): CAN: save some bytes by using pointer to handler: Redmine Admin
14:27 Revision 6f6a4d28 (libbiwak3): adopted changes for STM32G0: Redmine Admin
14:10 Revision 5663062f (libbiwak3): adopted changes for STM32G4: Redmine Admin

07.12.2023

20:01 Revision 9892d0c6 (libbiwak3): Merge branch 'uart_handler_pointer' into devel: Redmine Admin
19:59 Revision 8cbe3257 (libbiwak3): uart: dont hold config reference in object: Redmine Admin
19:48 Revision 83666d0c (libbiwak3): uart: don't store config reference in object: Redmine Admin
19:45 Revision cad4de4b (libbiwak3): uart: cleanup: Redmine Admin
13:58 Revision 6713c78d (libbiwak3): made uart handler pointer again: Redmine Admin
13:39 Revision b4961a8c (libbiwak3): fixed merge commit: Redmine Admin
13:30 Revision 2f492f72 (libbiwak3): Merge remote-tracking branch 'lenovo/452_curly_brace_init' into devel_curly_brace: Redmine Admin
13:30 Revision acf6226c (libbiwak3): Merge remote-tracking branch 'lenovo/can_curly_brace_init' into devel_curly_brace: Redmine Admin

05.12.2023

16:44 Feature #452 (Abgewiesen): curly brace init for periphery typedefs in peripherie constuctors: This increased binary size daramtically. Maximilian Seesslen
16:34 Fehler #456 (Erledigt): link-script: section '.marker' is not marked with '(NOLOAD)': Test again if size is an problem then. 'rufa' is an good candidate. Should fail with missin '(NOLOAD)' and succeed wi... Maximilian Seesslen
16:04 Feature #455 (Erledigt): change beckon behaviour: * reduce warn-blink-time to 5 minutes
* introduce beckon-blinking (warning-blinking is confusing)
* beckon not poss... Maximilian Seesslen

03.12.2023

09:57 Revision 8906bf22 (libbiwak3): uart: use fix handler: Redmine Admin

02.12.2023

16:30 Revision 75a0e1ee (libbiwak3): Merge branch '452_curly_brace_init' into devel: Redmine Admin
16:27 Revision 146a9ce6 (libbiwak3): Merge remote-tracking branch 'origin/can_curly_brace_init' into 452_curly_brace_init: Redmine Admin
16:14 Revision a8e0896a (libbiwak3): updated changelog for v2.7.1: Redmine Admin

30.11.2023

22:24 Revision fd9a18f4 (libbiwak3): CRC: fixed building when .DefaultPolynomialUse init field is available: Redmine Admin
22:13 Revision b830e546 (libbiwak3): fixed building for x86: Redmine Admin
22:05 Revision f6cf8bf5 (libbiwak3): revert merge issue: Redmine Admin
22:01 Revision 48f8f02b (libbiwak3): fixed merge conflict: Redmine Admin
22:00 Revision 017445e0 (libbiwak3): fixed building on x86: Redmine Admin
21:26 Revision d971be54 (libbiwak3): [451] support gpio auto init for uart: Redmine Admin
21:20 Revision 1239df1a (libbiwak3): draft: Redmine Admin
21:13 Revision 0bfe4d6d (libbiwak3): [451] draft for direct gpio init: Redmine Admin
21:11 Revision 27d3e927 (libbiwak3): [452] use curly brace init for uart: Redmine Admin
21:03 Feature #452 (Abgewiesen): curly brace init for periphery typedefs in peripherie constuctors: Should be more clean. Maximilian Seesslen
21:00 Revision 7200ba3b (libbiwak3): cleanup: Redmine Admin
20:40 Feature #451 (Erledigt): support direct gpio init: arena can initialize gpios for periphery like CAN, SPI and I2C directly in the generated init-function.
The GPIOs ar... Maximilian Seesslen
11:31 Revision 342586e9 (libbiwak3): can: init handler structure directly via curly brace initializing: Redmine Admin
11:30 Revision 6a3aa2f9 (libbiwak3): crc32: init handler structure directly via curly brace initializing: Redmine Admin
11:27 Revision 41b7bf88 (libbiwak3): i2c, spi: dont hold gpios in object: Just initialize them once and forget about them. Redmine Admin

Auch abrufbar als: Atom