Aktivität
von 10.09.2021 bis 09.10.2021
07.10.2021
- 21:04 Feature #79 (Erledigt): retain: support length and crc32 again
- 15:37 Feature #79 (Erledigt): retain: support length and crc32 again
- 8-Bytes-Version is not good.
Most STM32 only support CRC32. CRC8 is not very save.
Length should be supported....
04.10.2021
- 00:21 Revision 3c3eb9fc (libbiwak3): draft - ok
- 00:02 Revision bdb896b7 (libbiwak3): draft - ok
- 22:33 Revision f73a24ed (libbiwak3): draft - ok
03.10.2021
21.09.2021
18.09.2021
- 14:15 Fehler #66 (Abgewiesen): STMF042: Check HSI calibration/trimming
- Seems to be a software issue. Long delay in interrupt solves the problem.
- 13:23 Revision 1c3f84c3 (libbiwak3): enabled config blocks for stm32f042 again
- 13:23 Revision e98c3901 (libbiwak3): uart: inserted long delay. stm32f042 issue?
17.09.2021
- 20:14 Unterstützung #67 (Erledigt): Support STM32G441 FDCAN
- 20:10 Unterstützung #67: Support STM32G441 FDCAN
- Looks good. 125KBit no issues.
250KBit: Oszi should not be connected
500KBit: 120Ohm terminator is needed
1MBit: n... - 14:10 Unterstützung #67 (Erledigt): Support STM32G441 FDCAN
- check
STM32CubeG4-master/Projects/STM32G474E-EVAL/Examples/FDCAN/FDCAN_Com_IT/Src/main.c
Someone had similar p... - 20:01 Revision e19ff18e (libbiwak3): FDCAN: working 250KBit
- 16:52 Revision 5b31c6c7 (libbiwak3): compilable FDCAN
- 11:56 Fehler #66 (Abgewiesen): STMF042: Check HSI calibration/trimming
- Uart is not working correctly (only 9600 Baud, also not completely without problems).
Several MCUs show same behavio...
15.09.2021
13.09.2021
12.09.2021
Auch abrufbar als: Atom