Wiki » Historie » Version 8
Maximilian Seesslen, 04.09.2024 21:26
| 1 | 1 | Maximilian Seesslen | h1. Wiki |
|---|---|---|---|
| 2 | |||
| 3 | There are some issues that can only be tested via power resets. |
||
| 4 | |||
| 5 | * SPI has an issue that it needs retries |
||
| 6 | * Looks like configuration I2C EEPROM gets reset to defaults |
||
| 7 | 3 | Maximilian Seesslen | * RTC-offline-test (Wie lange haelt die RTC Batterie) |
| 8 | 1 | Maximilian Seesslen | |
| 9 | 3 | Maximilian Seesslen | The device has an CANBus in and an CANBus out. The testsoftware is on the DUT. The DUT sends the command to toggle power line to Awaria via CAN. |
| 10 | The switch-off time has to be an parameter. The RTC-Tests will be complex, the Awaria software shall be simple and generic. |
||
| 11 | 2 | Maximilian Seesslen | |
| 12 | An data multiplexer can be used along with a mosfet for power line. |
||
| 13 | |||
| 14 | h1. Parts |
||
| 15 | |||
| 16 | * MCU: The smallest thing |
||
| 17 | 1 | Maximilian Seesslen | * Multiplexer: |
| 18 | 3 | Maximilian Seesslen | ** MC14551BDG bis zu 1K RON: 1050 |
| 19 | ** TS5A23166DCUR cool, 2 channels, up to 100mA, 1,8-6,5V |
||
| 20 | 6 | Maximilian Seesslen | ** Habe: |
| 21 | 7 | Maximilian Seesslen | *** DG408LEDQ-T1-GE3; .#273; 1:8 |
| 22 | 8 | Maximilian Seesslen | *** DG409LEDQ-T1-GE3; .#321; 1:8 |
| 23 | *** ADG736; .#315; 2x1:2 |
||
| 24 | *** RS2102XN ADG836YRMZ |
||
| 25 | 6 | Maximilian Seesslen | |
| 26 | 5 | Maximilian Seesslen | * Big EEPROM, device can store test info from DUT |
| 27 | 4 | Maximilian Seesslen | |
| 28 | Spannungs/Strom zu umstaendlich. |