Fehler #471
Von Maximilian Seesslen vor 12 Monaten aktualisiert
In normal operation this is no issue because its an normyl power cycle.
But when the device is still powered by another power source, it won't be
powered on again.
This is an hardware issue; PB0 can not act has wakeup.
As workaround the software should could not really shutdown the MCU but have an 'off' in the statemachine.
This has to be handles via EEPROM-Flag. Future hardware might actualy shut off, even if it is powered
externally.
The off-state should be indicated by LED flashing.
But when the device is still powered by another power source, it won't be
powered on again.
This is an hardware issue; PB0 can not act has wakeup.
As workaround the software should could not really shutdown the MCU but have an 'off' in the statemachine.
This has to be handles via EEPROM-Flag. Future hardware might actualy shut off, even if it is powered
externally.
The off-state should be indicated by LED flashing.