Fehler #471
Wakeup-Button is not working
Beginn:
18.01.2024
Abgabedatum:
% erledigt:
0%
Geschätzter Aufwand:
CS Zielversion:
Beschreibung
In normal operation this is no issue because its an normal power cycle.
But when the device is still powered by another power source, it won't be
powered on again.
This is an hardware issue; PB0 can not act has wakeup.
As workaround the software should not really shutdown the MCU but have an 'off' in the statemachine.
This has to be handles via EEPROM-Flag. Future hardware might actualy shut off, even if it is powered
externally.
The off-state should be indicated by LED flashing.
Historie
Von Maximilian Seesslen vor etwa 1 Jahr aktualisiert
Von PB1 is no WKUP at all!
Others WKUP-pins in the arena file have to be checked.
Von Maximilian Seesslen vor 12 Monaten aktualisiert
- Beschreibung aktualisiert (diff)
- Priorität wurde von Normal zu Niedrig geändert
Von Maximilian Seesslen vor 12 Monaten aktualisiert
- Projekt wurde von Mainswitch zu mainSwitch geändert