Projekt

Allgemein

Profil

Aktivität von Maximilian Seesslen

von 24.12.2024 bis 22.01.2025

22.01.2025

14:53 Cordyceps Feature #599 (Erledigt): Sort nodes in node view
Maximilian Seesslen
10:49 libcampo Feature #603 (Neu): Vagus: CAN: use filters
When flashing firmware to a device, everything gets quite busy.
This can be avoided by using filters.
* Allow all m...
Maximilian Seesslen
09:34 sensemux Fehler #601: Sensemux does not operate CAN properly
Transceiver OK, traffic test ok (ignore error on start).
When scanning bus, some messages get lost.
Implement (opti...
Maximilian Seesslen

21.01.2025

16:04 CANSwitch Feature #498 (Abgewiesen): Write testing framework based on events for host PC
Testing software on PC directly is much nicer.
Maximilian Seesslen
15:54 CANSwitch Test #487 (Erledigt): Fading working
Maximilian Seesslen
15:53 CANSwitch Feature #562 (Erledigt): Binary size to big
Works well at the moment. Maximilian Seesslen
15:51 CANSwitch Fehler #602 (Neu): Media is not switched off
Is the fader active, so with delay of 20 Seconds?
Maximilian Seesslen
15:50 CANSwitch Test #485 (Erledigt): Timeout
Maximilian Seesslen
13:23 sensemux Fehler #601 (Neu): Sensemux does not operate CAN properly
[[http://www.bittiming.can-wiki.info/]]
| Bit Rate | accuracy | Prescaler | Number of quante | Seg1 (Prop_Seg+Phas...
Maximilian Seesslen

17.01.2025

13:29 Cordyceps Feature #599 (Erledigt): Sort nodes in node view
The objects of nodes are already sorted.
When the nodes are also sorted, the nodes will always be at the same positi...
Maximilian Seesslen

16.01.2025

18:44 Campo Feature #598 (Neu): CS2025.01
Maximilian Seesslen
18:26 Kokon Feature #597 (In Bearbeitung): Support second bootloader for flashing first bootloader
Maximilian Seesslen
18:16 Kokon Feature #597 (In Bearbeitung): Support second bootloader for flashing first bootloader
Would be nice to be able to flash bootloader. For this a second bootloader has to be flashed at the application area.... Maximilian Seesslen
17:56 Biwak Fehler #596 (Neu): Device freezes on high CAN traffic
When flashing (other) device, mainswitch freezes.
Sending an error is problematic.
Send error only on error-transit...
Maximilian Seesslen

15.01.2025

15:12 Kokon Feature #595 (Neu): Check board id and revision before flashing
This can be checked in flasher tool or on the devcice.
Where to keept the information for firmware files.
Database ...
Maximilian Seesslen
11:05 Cordyceps Fehler #592 (Erledigt): Dont show MMP messages in nodes tree
Maximilian Seesslen

13.01.2025

15:38 libcampo Feature #593 (Neu): hwdata: clean up
Clean up the code a bit.
An seperate application should be created for dumping, generating eeprom content, transfe...
Maximilian Seesslen
14:33 Cordyceps Fehler #592 (Erledigt): Dont show MMP messages in nodes tree
Its interpreted as regular TDT object. Maximilian Seesslen

12.01.2025

16:26 libcampo Feature #588 (Erledigt): hwDataGen
Maximilian Seesslen

09.01.2025

16:06 theme_noto Feature #566: create const icon references
Looks like there is something implemented. But documentation about generated header is completely missing.
Maximilian Seesslen

08.01.2025

11:20 Biwak Fehler #590 (Erledigt): lrElapsed does not work any more
Test is added.
Problem was in Mainswitch. After a Software-Shutdown the shutdown-message was spamed when power was...
Maximilian Seesslen

07.01.2025

18:31 Biwak Feature #591 (Neu): move timing functions to systimer.cpp
Make it clean. "usleep()" is in no way related to CTimer. Maximilian Seesslen
16:28 Biwak Fehler #590: lrElapsed does not work any more
This can be a unit test for host.... Maximilian Seesslen
14:32 Biwak Fehler #590 (Erledigt): lrElapsed does not work any more
It waits for the first elapse event and then returns true forever.
Looks like timer-value is not updated.
Very ba...
Maximilian Seesslen
15:09 Kokon Feature #585 (Erledigt): Implement scanning nodes and switching run mode
Maximilian Seesslen
14:27 Biwak Feature #470 (Erledigt): cmake function to select bootloader or application with bootloader
Maximilian Seesslen
14:13 Campo Feature #589 (Neu): Add script to find devices with obsolete firmware
Put logic for SQLite database to CANFlasher/kokon is bad.
Generate parsable version output to CANFlasher tool would ...
Maximilian Seesslen
12:19 libcampo Feature #588 (Erledigt): hwDataGen
Create generator tool.
The scipts are nice but confusing.
Maximilian Seesslen
12:11 libcampo Feature #491 (Erledigt): Vagus: implement command to switch to bootloader
Maximilian Seesslen
12:10 libcampo Feature #457 (Erledigt): Track library release sizes
Maximilian Seesslen
12:01 Campo Feature #500 (Erledigt): reactivate qt integration
Maximilian Seesslen
11:59 Cordyceps Feature #520 (In Bearbeitung): Implement canserver/CAN-Gateway
Maximilian Seesslen
11:58 Cordyceps Feature #520 (Erledigt): Implement canserver/CAN-Gateway
CANHub is created, should be used by cordyceps. Maximilian Seesslen
 

Auch abrufbar als: Atom