Redmine

05.11.2024

23:28 Biwak Revision c1148391 (libbiwak3): added check for configuration plausibility

Redmine Admin

01.11.2024

19:30 Biwak Revision 3f1c69aa (libbiwak3): updated changelog for v2.10.1

Redmine Admin

19:22 Biwak Revision 617504a4 (libbiwak3): uart: added delay when uart is busy

Needed in bringup Redmine Admin

19:21 Biwak Revision d01d851e (libbiwak3): i2cflash: writeData: return specific error code when waitBusy() failed

Redmine Admin

19:20 Biwak Revision 239d1fc1 (libbiwak3): i2c: waitBusy: added delay

It can happen that HAL_I2C_IsDeviceReady returns immediately
with an error.
An delay is needed to give device a chanc... Redmine Admin

19:18 Biwak Revision 60fab84a (libbiwak3): fixed debug output

Redmine Admin

19:17 Biwak Revision d14518e1 (libbiwak3): can: adopted HAL changes

The values for macros like FDCAN_DLC_BYTES_8 changed.
Previously the values had to be shifted to get the real
can mes... Redmine Admin

19:15 Biwak Revision 30377a94 (libbiwak3): flash: fixed shadowed attribute

acquireMemory() could fail. Redmine Admin

31.10.2024

20:26 Biwak Revision ac358977 (libbiwak3): updated changelog for v2.10.0

Redmine Admin

30.10.2024

20:32 Biwak Revision a008179b (libbiwak3): function in own compile unit can not be constexpr

Redmine Admin

20:17 Biwak Revision 766cd68c (libbiwak3): Merge branch 'devel' of git.seesslen.net:src/libbiwak into devel

Redmine Admin

20:12 Biwak Revision 3b49a2e5 (libbiwak3): shrink

Redmine Admin

20:12 Biwak Revision 3a7a5ff4 (libbiwak3): spi: make nested spi chipselect configurable

Redmine Admin

18:33 Biwak Revision 1435e55f (libbiwak3): fixed typo

Redmine Admin

17:02 Biwak Revision a77a5991 (libbiwak3): fixed building for host

Redmine Admin

16:37 Biwak Revision f73a73db (libbiwak3): downsize

Redmine Admin

13:57 Biwak Revision 9a03ac82 (libbiwak3): ignore volatile for HAL header also for STM32L4

Redmine Admin

13:47 Biwak Revision 845784a4 (libbiwak3): ignore volatile for HAL header also for STM32G4

Redmine Admin

13:40 Biwak Revision e30aa33b (libbiwak3): ignore volatile for HAL header also for STM32G0

Redmine Admin

11:16 Biwak Revision 6a4ea277 (libbiwak3): ignore volatile for HAL header only for STM32L1

Redmine Admin

11:12 Biwak Revision 071d3aab (libbiwak3): ignore -Wvolatile for HAL WKUP header

mpu_armv7.h uses an "|=" operation on a volatile register, which is not
allowed any more.
So "-Wvolatile" has to be i... Redmine Admin

29.10.2024

22:57 Biwak Revision a2c48f02 (libbiwak3): fixed compilation for host

Redmine Admin

22:10 Biwak Revision db7a0037 (libbiwak3): wkup: fixed compiling for host

Redmine Admin

22:04 Biwak Revision b0599af2 (libbiwak3): cmake: added wkup.cpp

Redmine Admin

20:54 Biwak Revision 4e7580ed (libbiwak3): fixed building for host

Redmine Admin

20:17 Biwak Revision ed2771d1 (libbiwak3): updated for building for host

Redmine Admin

15:17 Biwak Revision 93119153 (libbiwak3): linkerscript: fixed building miniminutnik

"*(.got*)" is needed to be present in the data section.
Otherwise linking breaks without expressive message. Redmine Admin

28.10.2024

23:07 Biwak Revision 3f84b753 (libbiwak3): remove declaration of pwm event loop

Redmine Admin

22:10 Biwak Revision ac52a7b2 (libbiwak3): fixed using config define

Redmine Admin

21:49 Biwak Revision e48b2005 (libbiwak3): cleanup delay functions

Redmine Admin

27.10.2024

06:42 Biwak Revision 8f686c94 (libbiwak3): disabled debug for retain.cpp

Redmine Admin

26.10.2024

15:16 Biwak Revision b7768d79 (libbiwak3): TSC2007: added CMD_SETUP, readInput()

Redmine Admin

11:53 Biwak Revision 9a8093a8 (libbiwak3): fixed building for stm32l4

Redmine Admin

11:47 Biwak Revision dd1fcc7f (libbiwak3): fixed building on stm32l1

Redmine Admin

11:44 Biwak Revision f4f9e5a9 (libbiwak3): fixed building on stm32l1

Redmine Admin

11:40 Biwak Revision 8efe17ca (libbiwak3): fixed building for STM32L0

Redmine Admin

11:31 Biwak Revision 2a7c28ad (libbiwak3): fixed building

Redmine Admin

11:20 Biwak Revision b5b66993 (libbiwak3): fixed building

Redmine Admin

24.10.2024

16:37 Biwak Revision cd04081f (libbiwak3): enabled rupdateFrequency() for STM32F3

No idea why this was disabled before. Redmine Admin

16:34 Biwak Revision a7b44273 (libbiwak3): formating

Redmine Admin

16:34 Biwak Revision 517978c3 (libbiwak3): added "alarm" blink mode

Redmine Admin

16:34 Biwak Revision c07cd8cb (libbiwak3): Fixed building for STM32F3X

adopted biwak changes Redmine Admin

14.10.2024

14:45 Biwak Revision f665a76c (libbiwak3): adopted biwak changes

Redmine Admin

12.10.2024

17:06 Biwak Revision 442a8ea6 (libbiwak3): fixed building on stm32g4

Redmine Admin

14:21 Biwak Revision 8b1be2f6 (libbiwak3): Implemented data event

In order to not miss any CAN messages the eventloop in the main application
has to get called at high frequency. Its ... Redmine Admin

13:15 Biwak Revision 1918e7a3 (libbiwak3): i2c: made interrupt optional

This saves some bytes. in master mode the interrupt is not needed at
all. Redmine Admin

13:15 Biwak Revision a465908a (libbiwak3): timer: made interrupt optional

saves some bytes Redmine Admin

13:14 Biwak Revision 01fbe0cb (libbiwak3): timer: remove member for frequency

This saves some bytes Redmine Admin

11:16 Biwak Revision 3518a901 (libbiwak3): Fader: dont use delta in calculation

Using deltas is saving some bytes. But its unprecise and errornous when
the cycle time is very short. Redmine Admin

11:14 Biwak Revision 9ccd08c2 (libbiwak3): added unit test for fader class

Redmine Admin

10.10.2024

19:48 Biwak Revision 2d07af93 (libbiwak3): Merge branch 'downsize' into devel

Redmine Admin

19:47 Biwak Revision a68b2289 (libbiwak3): Merge branch 'i2c_eeprom_fix' into devel

Redmine Admin

19:46 Biwak Revision 2c51fe53 (libbiwak3): fixed writing to eeprom overĺapping write page boundaries

Write page boundaries may not be crossed in a single i2c write instruction. Redmine Admin

08.10.2024

22:29 Biwak Revision 6e6aeda9 (libbiwak3): downsize

Redmine Admin