Aktivität

von 07.10.2022 bis 05.11.2022

15:02 Minutnik eInk Fehler #298 (Erledigt): Temperature-Sensor, Flash etc are permanently on VDD: There is already an switch for Display.
Temperature-sensor and FLASH can be connected to this power source.
Need ... Maximilian Seesslen

22:17 Minutnik eInk Fehler #288: Device No.2 freezes when connected to USB: Could reproduce it also with serno.1.
The disturbtion on VDD is quite high when USB is connected (ca. 24ns breakdown... Maximilian Seesslen
14:42 Minutnik eInk Fehler #279: ADC breaks after buzzer alarm: This can be added to bringup tests. Maximilian Seesslen
14:39 Minutnik eInk Feature #293 (Erledigt): Bringup: add calibration measurement functions: Device should be able to calibrate itself and store the values in eeprom.
Maximilian Seesslen
14:35 Minutnik eInk Unterstützung #292 (Erledigt): Power injection pins 3V missing: One additional testpoint for 3V would help to measure power consumtion of MCU side.
Maximilian Seesslen

14:45 Minutnik eInk Fehler #288: Device No.2 freezes when connected to USB: Is USB power to low?
Maximilian Seesslen
14:40 Minutnik eInk Fehler #291 (Erledigt): ADC Spannungsteiler ist permanent: Route the ground to an GPIO so it can be disabled and will be disabled when powered off.
Or even use an NMOS.
I m... Maximilian Seesslen
14:38 Minutnik eInk Fehler #290 (Neu): Yellow and red LEDs are quite dark: This is only noticable with lighttramitters which blocks/diffuse some light.
Maximilian Seesslen

11:03 Minutnik eInk Fehler #288 (Erledigt): Device No.2 freezes when connected to USB: Device No.1 can not reproduce this.
Maybe Brownout-detection fails. Check other groups.
OB_BOR_LEVEL3: Supp... Maximilian Seesslen
10:57 Minutnik eInk Fehler #286 (Abgewiesen): ADC breaks after buzzer alarm: Duplicate Maximilian Seesslen

11:20 Minutnik eInk Fehler #279: ADC breaks after buzzer alarm: return ADC value 0 and set heartbeat led to error blinking. Maximilian Seesslen
11:19 Minutnik eInk Fehler #286 (Abgewiesen): ADC breaks after buzzer alarm: Reason unclear.
At least the "trouble"-mechanism of sensemux could be used to indicate the problem via LED.
Assum... Maximilian Seesslen
10:46 Minutnik eInk Fehler #283 (Erledigt): SPI Flash not working: Error in App-file; CS was not used. Maximilian Seesslen
10:01 Biwak Feature #284 (Erledigt): implement sd-card support: Maximilian Seesslen
10:01 Biwak Feature #284 (Erledigt): implement sd-card support: Maximilian Seesslen

11:11 Minutnik eInk Fehler #283 (Erledigt): SPI Flash not working: Test fails.
Size is "0".
Did the previous test report work?
Maximilian Seesslen
11:10 Minutnik eInk Feature #280 (Erledigt): Show Serial number in display: Maximilian Seesslen
11:09 Minutnik eInk Feature #281 (Erledigt): Display: Version: dont show SHA: Maximilian Seesslen
10:39 libcampo Feature #222 (Erledigt): bringup: add results with type info: Maximilian Seesslen

22:23 libcampo Feature #259 (Erledigt): embed resources into binaries: Maximilian Seesslen
22:01 libcampo Feature #282 (Erledigt): gitversion: add compact version with dirty indication: Maximilian Seesslen
19:09 libcampo Feature #282 (Erledigt): gitversion: add compact version with dirty indication: Sometimes its enough to know that it is dirty and there are changes to version tag. But there might not be enough spa... Maximilian Seesslen
19:04 Minutnik eInk Feature #281 (Erledigt): Display: Version: dont show SHA: Not enough space. Implement a compact string in libcampo.
Maximilian Seesslen
19:02 Minutnik eInk Feature #280 (Erledigt): Show Serial number in display: I did not even mark the PCB :/ Maximilian Seesslen
18:55 Minutnik eInk Fehler #279 (Erledigt): ADC breaks after buzzer alarm: Reason unclear.
At least the "trouble"-mechanism of sensemux could be used to indicate the problem via LED.
Assum... Maximilian Seesslen

22:40 libcampo Feature #278 (Erledigt): add hwdata layout v5.0: Maximilian Seesslen
11:40 libcampo Feature #278 (Erledigt): add hwdata layout v5.0: The layout is strange at the moment; redundant fields.
2Byte Article/Family (e.g. Minutnik-Oled, Minutnik-eInk, Mi... Maximilian Seesslen
20:40 Minutnik eInk Feature #274 (Erledigt): implement USB-Mode: Maximilian Seesslen

20:07 Minutnik eInk Fehler #276 (Abgewiesen): GDB Breakpoints are not working: duplicate Maximilian Seesslen
16:32 Minutnik eInk Fehler #276 (Abgewiesen): GDB Breakpoints are not working: Can't write hwdata this way.
Working with debugger still works; i can hold and continue so pins are not completely m... Maximilian Seesslen
20:06 Minutnik eInk Fehler #277 (Erledigt): GDB Breakpoints are not working: "gdb_breakpoint_override hard" had to be set in openocd target file. Maximilian Seesslen
17:42 Minutnik eInk Fehler #277: GDB Breakpoints are not working: Depending on breakpoints gdb can call specific commands by itself;... Maximilian Seesslen
17:02 Minutnik eInk Fehler #277 (Erledigt): GDB Breakpoints are not working: Halting and continuing is working so general SWD-Pin-Configuration is not totally bad.
* Is openocd showing valid ... Maximilian Seesslen
16:28 Minutnik eInk Feature #255 (Erledigt): Start implementation of software: Maximilian Seesslen

Auch abrufbar als: Atom

Redmine