Aktivität - Redmine

Aktivität

von 11.12.2021 bis 09.01.2022

09.01.2022

15:43 miniminutnik Feature #129 (Erledigt): Firmware for different MCUs: Maximilian Seesslen
15:41 miniminutnik Fehler #115: LEDs stay on some times: Only happens when voltage is very low.
Maximilian Seesslen
14:52 Biwak Revision 4268a1f0 (libbiwak3): cleanup: Redmine Admin
07:31 Miniminutnik Feature #114 (Erledigt): Device must run with 2Volts: Maximilian Seesslen
07:25 Miniminutnik Feature #114: Device must run with 2Volts: Solved by replacing blueish LEDs and MOSFETs. Maximilian Seesslen
07:05 Miniminutnik Fehler #110 (Erledigt): Replace buzzer: Solution: use other NMOS Maximilian Seesslen

08.01.2022

14:10 Campo Fehler #130 (Erledigt): cmake gitversion.h is not correct: Shows old revision. Header is not created reliably.
Why has it to be created per binary target?
Create test scrip... Maximilian Seesslen
13:51 miniminutnik Feature #129 (Erledigt): Firmware for different MCUs: 32K version can have more melodies.
Binaries must be stored for both MCUs
Install all files via "make install".
Maximilian Seesslen
12:24 miniminutnik Feature #95 (Erledigt): use configuration in eeprom: Maximilian Seesslen
12:23 miniminutnik Feature #105 (Abgewiesen): implement error mode: Nope, just use default values. Maximilian Seesslen
12:21 miniminutnik Feature #104 (Erledigt): use HW-CRC for configuration check: Cool. Switchable (sw vs. hw) via arena app file. Maximilian Seesslen
12:19 miniminutnik Feature #94 (Erledigt): implement hwData: Maximilian Seesslen
11:48 Biwak Fehler #24 (Erledigt): get rid of periphery enums: Maximilian Seesslen
11:44 Biwak Revision 3dd70c62 (libbiwak3): [#24] got rid of periphery enums: Redmine Admin
10:36 Biwak Unterstützung #128 (Erledigt): Rework interrupts: Maximilian Seesslen

07.01.2022

21:29 Biwak Feature #26 (Erledigt): Check necessity of controller-model dependant ISR names: Works. Defines are still to be removed on some places. Maximilian Seesslen
21:26 Biwak Feature #107 (Erledigt): Rework class for ILI9341V: Good enough. Maximilian Seesslen
21:19 Biwak Feature #25 (Abgewiesen): Finally get rid of static data: Maximilian Seesslen
21:18 Biwak Revision 3790f161 (libbiwak3): [#25] get rid of staticData blocks: Redmine Admin
20:45 Biwak Revision 2a6728ee (libbiwak3): cleanup: Redmine Admin
19:45 Biwak Revision dbc719e4 (libbiwak3): cleanup: Redmine Admin
19:45 Biwak Revision ea2bb39d (libbiwak3): uart: dont inherit CInterrupt: Redmine Admin
19:45 Biwak Revision ae87f940 (libbiwak3): timer: dont inherit CInterrupt: Redmine Admin
19:44 Biwak Revision d2291b54 (libbiwak3): interrupt: cleanup: Redmine Admin
19:43 Biwak Revision 191a39f5 (libbiwak3): uart: got rid of uart periphery enum: Redmine Admin
19:41 Biwak Revision 29aec2c0 (libbiwak3): gpio: cleanup: Redmine Admin
19:40 Biwak Revision 99e22095 (libbiwak3): retain: optimize memory mapped flash (eeprom): Redmine Admin
16:47 Biwak Revision 52e89174 (libbiwak3): removed printer.h: Redmine Admin
12:34 Biwak Revision 5574b1cb (libbiwak3): further reconstructions: Redmine Admin
11:36 Biwak Revision 51062333 (libbiwak3): cleanup: Redmine Admin
11:34 Biwak Revision 53582121 (libbiwak3): cleanup: Redmine Admin
11:27 Biwak Revision 69326168 (libbiwak3): uart: cleanup: Redmine Admin
11:12 Biwak Revision 628136a3 (libbiwak3): removed second parameter in exception(): I was hoping for some saved bytes Redmine Admin
10:57 Biwak Revision ccaa2fad (libbiwak3): use exception from biwak instead of lepto: Redmine Admin
10:08 Biwak Revision 971f5989 (libbiwak3): timer: remove getCounter(): Redmine Admin

06.01.2022

19:43 Biwak Revision e1cc2a4e (libbiwak3): timer: cleanup: Redmine Admin
19:02 Biwak Revision a1ad349e (libbiwak3): pwm: cleanup: Redmine Admin
18:48 Biwak Revision 49882383 (libbiwak3): timer: cleanup: Redmine Admin
17:21 Biwak Revision 7142ef86 (libbiwak3): uart: cleanup: Redmine Admin
17:05 Biwak Revision 85bbe69c (libbiwak3): uart: optionaly avoid dynamic data: Redmine Admin
15:38 Biwak Revision c5ed7b16 (libbiwak3): Merge branch 'mase/devel': Redmine Admin
15:37 Biwak Revision 60dc9ec4 (libbiwak3): [#128] cleanup: Redmine Admin
15:28 Biwak Revision ed8cb164 (libbiwak3): [#128] reworked interrupt handling: Redmine Admin
14:46 Biwak Unterstützung #128 (Erledigt): Rework interrupts: The different ways, tables and stuff is anoying. Want to safe some flash memory. Maximilian Seesslen

05.01.2022

20:10 Biwak Revision 83ccaf63 (libbiwak3): cleanup: Redmine Admin

04.01.2022

20:00 Biwak Revision 76b4259e (libbiwak3): gpio: cleanup: Redmine Admin
19:26 Biwak Revision 779d8e1f (libbiwak3): gpio: draft to get rid of mode rables: Redmine Admin
18:52 Biwak Revision c38b9c84 (libbiwak3): gpio: cleanup: Redmine Admin
18:43 Biwak Revision 4d0f552f (libbiwak3): gpio: cleanup: Redmine Admin
18:36 Biwak Revision 824af059 (libbiwak3): gpio: cleanup: Redmine Admin
18:04 Biwak Revision ac8cadf0 (libbiwak3): cleanup gpio: Redmine Admin
17:38 Biwak Revision 31966cb0 (libbiwak3): draft: Redmine Admin
17:38 Biwak Revision d7a86e07 (libbiwak3): added eeprom_intern: Redmine Admin
17:37 Biwak Revision 674c79bd (libbiwak3): imlemented CRC: Redmine Admin

03.01.2022

19:32 Biwak Revision 152f596e (libbiwak3): fixed crc32: Redmine Admin

27.12.2021

17:08 TCB Fehler #116 (Erledigt): Dont use autotools from host: Maximilian Seesslen
16:22 TCB Fehler #116 (Erledigt): Dont use autotools from host: Maximilian Seesslen

26.12.2021

15:05 TCB Fehler #48 (Erledigt): texinfo version has to match host systems version of texinfo: Maximilian Seesslen

25.12.2021

14:06 TCB Feature #52 (Erledigt): remove the per-family ld-scripts: Maximilian Seesslen

17.12.2021

14:51 miniminutnik Fehler #115 (Erledigt): LEDs stay on some times: Some times an item LED stays on when iterating through the items. Redmine Admin
14:49 miniminutnik Feature #111 (Abgewiesen): Configurable loudness: Sound is strange when duty cycle gets low.
This will be more confusing than a cool feature. Redmine Admin

15.12.2021

16:46 miniminutnik Feature #103 (Abgewiesen): implement Wartungsmodus: Redmine Admin
16:45 miniminutnik Feature #103: implement Wartungsmodus: User has to press reset (and enter) before gdb connects. Implemented in Campo-Script. Redmine Admin

14.12.2021

17:06 miniminutnik Feature #103: implement Wartungsmodus: check:
* bring device into sleep mode
* hold reset
* connect with OpenOCD/gdb
* try to hold it somehow
* set b... Redmine Admin
14:27 Miniminutnik Fehler #110: Replace buzzer: MOSFET will probably arrive in CW50.
Lets see if it will help.
The Transistor variant works with 2V (current unknow... Redmine Admin

13.12.2021

14:24 Miniminutnik Feature #109: Implement HWData: Its Software Redmine Admin
13:12 Miniminutnik Feature #114 (Erledigt): Device must run with 2Volts: The white LED probably has to be replaced.
-The violet led was not so picki (The one at the debug board can be ens... Redmine Admin

11.12.2021

15:35 Biwak Revision d8097634 (libbiwak3): GDisplayIli: rework 3: Redmine Admin
15:02 Biwak Revision ce061cdd (libbiwak3): GDisplayIli: rework 2: Redmine Admin
13:21 Biwak Revision 5b9bf47a (libbiwak3): GDisplayIli: rework 1: Redmine Admin

Auch abrufbar als: Atom