Redmine

12.08.2021

22:45 Hardware Order #28 (Erledigt): STM32G441KBT6

Redmine Admin

06.08.2021

13:06 Hardware Order #28 (Erledigt): STM32G441KBT6

https://www.reichelt.de/arm-cortex-m4f-mikrocontroller-32-bit-2-3-6v-128kb-lqfp-32-stm32g441kbt6-p264412.html?&trstct... Redmine Admin

12:49 Biwak Feature #26 (Erledigt): Check necessity of controller-model dependant ISR names

Just implement every possible name and let the selection done by the linker map file?
This would avoid precompiler i... Redmine Admin

12:32 Biwak Feature #25 (Abgewiesen): Finally get rid of static data

That should all be moved to arena and be replaced by the configData-Blocks.
Libbiwak is not the controler database, ... Redmine Admin

12:17 NUC64DEBUG Fehler #12: Serial port does not work through adapter

Will be verified with bringup of canio Redmine Admin

12:08 TCB Feature #10 (In Bearbeitung): Use Pico-libc

Redmine Admin

11:59 Biwak Fehler #24 (Erledigt): get rid of periphery enums

They are platform dependant.
With new configData-mechanism they should not be needed anyhow. Redmine Admin

31.07.2021

14:07 Campo Fehler #19 (Erledigt): multiple binaries in single cmake project

There can not be multiple MCUs at the same time because Libs are compiled once.
Redmine Admin

22.07.2021

16:47 horo Fehler #16: Verify the solder ramps

https://en.wikipedia.org/wiki/Reflow_soldering#/media/File:RSS_Components_of_a_Profile1.svg
Redmine Admin

21.07.2021

13:48 horo Fehler #17 (Erledigt): Verify temperature sensor

Use an temprec to verify two sensors.
Redmine Admin

13:45 horo Fehler #16 (Erledigt): Verify the solder ramps

Check with:
https://www.tme.eu/Document/b7e333fea473ab83d4d4283416af86dc/PK2N-3LDE-HSD.pdf
https://www.coilcraft.... Redmine Admin

13:35 horo Fehler #15 (Erledigt): Solder prozess not reliable

After 5 solder runs, some LEDs on IMS PCB were still not soldered.
Verify the solder ramps with:
https://www.tm... Redmine Admin

17.07.2021

18:48 Minutnik Fehler #13 (Neu): Buttons do not fit

Replace with B3SN-3012
Height: 2mm
Auserer Ring unklar. 4mm wuerde noch gehen.
* Nachmessen
Stoesel gesamt:... Redmine Admin

16.07.2021

17:21 NUC64DEBUG Fehler #12 (Erledigt): Serial port does not work through adapter

Redmine Admin

17:15 NUC64DEBUG Fehler #12 (Erledigt): Serial port does not work through adapter

There is a twist in TX/RX.
The printed TX/RX on the nucleo is from the point of view of the ST-Link.
Redmine Admin