Office » Historie » Version 38
Maximilian Seesslen, 03.06.2025 17:59
| 1 | 1 | Maximilian Seesslen | h1. Office |
|---|---|---|---|
| 2 | |||
| 3 | 17 | Maximilian Seesslen | h2. Features |
| 4 | |||
| 5 | 26 | Maximilian Seesslen | Unterm strich alles, was momentan in den Boxen ist als single board Loesung [+RTC, +USB]. |
| 6 | 18 | Maximilian Seesslen | |
| 7 | 17 | Maximilian Seesslen | * RTC |
| 8 | 20 | Maximilian Seesslen | * CAN; -4 Connectors; Bus in, Bus out, CANDis, CANRec, CANIO- |
| 9 | 24 | Maximilian Seesslen | * SSR; CPC1976; 3 Stueck |
| 10 | 1 | Maximilian Seesslen | * Battery |
| 11 | 24 | Maximilian Seesslen | * 5V output mit idealer Diode |
| 12 | 1 | Maximilian Seesslen | * 6 Ausgaenge (OUT+PWM) fuer komplettes Zimmer |
| 13 | 26 | Maximilian Seesslen | * USB for configuration |
| 14 | 17 | Maximilian Seesslen | |
| 15 | h2. Traffo |
||
| 16 | 1 | Maximilian Seesslen | |
| 17 | 17 | Maximilian Seesslen | Traffo: CFM50S480 |
| 18 | 20 | Maximilian Seesslen | > LRS-75-36; zumindest ein Kaefig; 36V; |
| 19 | 21 | Maximilian Seesslen | LRS-75-24; 24V; |
| 20 | 1 | Maximilian Seesslen | |
| 21 | 14 | Maximilian Seesslen | h2. Regler |
| 22 | |||
| 23 | 24 | Maximilian Seesslen | Regler: LDB-350L; 8,28Euro; vertraegt 36V und kann bis 40V boosten. Ich hab ja eh noch welche. |
| 24 | 22 | Maximilian Seesslen | |
| 25 | 14 | Maximilian Seesslen | LDH-45A-350 koennte 2 seriel bei 12V Versorgung. |
| 26 | "DC/DC Wandler":https://www.tme.eu/de/katalog/dc-dc-wandler_100320/ |
||
| 27 | 1 | Maximilian Seesslen | 34,4V × 4 = 137,6V |
| 28 | 15 | Maximilian Seesslen | 34,4V × 2 = 68,8V |
| 29 | 1 | Maximilian Seesslen | Fuer hoehere SPannung ganz schoeno Klopper. |
| 30 | 21 | Maximilian Seesslen | |
| 31 | Gehen nur bis 32V: |
||
| 32 | LDD-350L billig und putzig: 22.6*9.9*8.9mm; 3,10Euro |
||
| 33 | LDD-300L verfuegbar. |
||
| 34 | 15 | Maximilian Seesslen | |
| 35 | 1 | Maximilian Seesslen | h2. LED |
| 36 | 16 | Maximilian Seesslen | |
| 37 | 25 | Maximilian Seesslen | LEDs: |
| 38 | * BXRE-65S1001-C-74; "#110"; 360mA: BXRH-27G1000-B-83 ist die warme variante |
||
| 39 | 13 | Maximilian Seesslen | > CLL020 |
| 40 | 10 | Maximilian Seesslen | > 13,5x13,5mm, 2xR2.0 |
| 41 | 12 | Maximilian Seesslen | "LED-Liste":https://www.tme.eu/de/katalog/led-leistungsdioden-weiss-cob_113365/?params=1113:1507302;1101:1508789,1602816&onlyInStock=1 |
| 42 | 4 | Maximilian Seesslen | COB-Halterung: 8100/G2 |
| 43 | 26 | Maximilian Seesslen | |
| 44 | 38 | Maximilian Seesslen | 34,4V*0,360A=12,384W |
| 45 | 95,55555556 Ohm |
||
| 46 | 95,55555556 Ohm * 0,350A = 33,44V |
||
| 47 | 33,44V*0,350A=11,704W |
||
| 48 | |||
| 49 | |||
| 50 | 26 | Maximilian Seesslen | h2. Powermeter |
| 51 | |||
| 52 | * INA226; 36V |
||
| 53 | |||
| 54 | h2. Open points |
||
| 55 | |||
| 56 | 32 | Maximilian Seesslen | Laeuft MCU mit Batterie los? RTC hat einen Ausgang, koennt klappen. |
| 57 | Testen am Eval-Board. |
||
| 58 | |||
| 59 | 27 | Maximilian Seesslen | |
| 60 | h2. MCU |
||
| 61 | |||
| 62 | 28 | Maximilian Seesslen | * STM32G441KBT6 LQFP32; "DS":https://www.st.com/resource/en/datasheet/stm32g441kb.pdf |
| 63 | 29 | Maximilian Seesslen | 32Pin zu klein |
| 64 | 30 | Maximilian Seesslen | |
| 65 | * STM32F072C8U6; UFQFPN48 |
||
| 66 | 31 | Maximilian Seesslen | |
| 67 | 1 | Maximilian Seesslen | h2. Kuehlkoerper |
| 68 | 34 | Maximilian Seesslen | |
| 69 | 35 | Maximilian Seesslen | "Kuehler":http://www.led-tech.de/de/50x50mm-Kuehlkoerper-fuer-Square-50 |
| 70 | 36 | Maximilian Seesslen | SK58410AL |
| 71 | SK57850AL |
||
| 72 | SK57710AL 2,3K/W; 2,15€ |
||
| 73 | |||
| 74 | 37 | Maximilian Seesslen | h2. NTC |
| 75 | |||
| 76 | NTCC-10K |
||
| 77 | |||
| 78 | 33 | Maximilian Seesslen | |
| 79 | 31 | Maximilian Seesslen | h2. Todo |
| 80 | |||
| 81 | Eval board |