Eval » Historie » Version 7
Redmine Admin, 08.02.2022 14:51
| 1 | 1 | Redmine Admin | h1. Eval |
|---|---|---|---|
| 2 | |||
| 3 | 5 | Redmine Admin | Usecases: |
| 4 | * sensor for 4 sensors |
||
| 5 | |||
| 6 | 1 | Redmine Admin | use dg409 to switch between sensors. (DG409 is 2:4 with 2 address lines, DG408 would be 1:8 with 3 address lines) |
| 7 | 6 | Redmine Admin | Dann kann ground gleich mit geschaltet werden und mehrere sensoren sllten sich nicht beeinflussen. |
| 8 | 5 | Redmine Admin | * 2x 5v output for pumps. |
| 9 | * i2c RTC for date (standalone). |
||
| 10 | * CAN for candis. |
||
| 11 | 1 | Redmine Admin | 1xPWM output (trivial canio, workaround fuer lampen. Warum 2?) |
| 12 | 7 | Redmine Admin | 1xPWM output buzzer; 17:[[https://www.homofaciens.de/technics-base-circuits-h-bridge_ge.htm]] muesst sein, mit not baustein. |
| 13 | 1 | Redmine Admin | Wenn invertiertes PWM-Signal vorhanden ist, spart man sich nen enable. NOT + NAND |
| 14 | 5 | Redmine Admin | * Update via USB is a nice feature. Circuit already available. |
| 15 | * RTC for switching lamps, standalone |
||
| 16 | * PWM output for lamps |
||
| 17 | * loud buzzer for alarm/alarm-clock |
||
| 18 | * button for confirm stuff |
||
| 19 | * OUT output for lamps; 2x3V (plant lamp/room lamp) |
||
| 20 | * 2LEDs regular |
||
| 21 | 1 | Redmine Admin | * SPI NAND-Flash |
| 22 | 6 | Redmine Admin | * Switch connection VUSB to can |
| 23 | 1 | Redmine Admin | |
| 24 | 2 | Redmine Admin | |
| 25 | 1 | Redmine Admin | Most things can be copied from candis. |
| 26 | 6 | Redmine Admin | ( https://www.nxp.com/docs/en/data-sheet/MC34933.pdf ) |
| 27 | 1 | Redmine Admin | |
| 28 | 6 | Redmine Admin | h1. Connectors |
| 29 | |||
| 30 | * Debug |
||
| 31 | * USB |
||
| 32 | * 4x 2Pin Sensors |
||
| 33 | * CANBus |
||
| 34 | * 1x 2Pin PWM Out for Lamp |
||
| 35 | * 2x 2Pin Out switch Plantlamp, room lamp |
||
| 36 | * 2x 2Pin Out pumps (5V, high current, with mosfets) |
||
| 37 | |||
| 38 | h1. HMI |
||
| 39 | |||
| 40 | * 2 LEDs regular (green/amber) |
||
| 41 | * 4 LEDs sensors selected(org) (SIPO) |
||
| 42 | * 4 LEDs sensors status(vio) (SIPO) |
||
| 43 | * 1 Button, quit alarm |
||
| 44 | * 2 Button boot/reset (firmware update via USB) |