Wiki » Historie » Revision 5
Revision 4 (Maximilian Seesslen, 11.04.2024 18:34) → Revision 5/9 (Maximilian Seesslen, 11.04.2024 18:37)
h1. Wiki
4 soil moisture Sensors can be connected to the board.
The sensors can be evaluated one after the other.
With shrinking hose on the sensors, the values look quite stable.
Each sensor needs it calibration according to the type and cable.
Air- and Water-Values are needed.
The reported value is promil; 0=Air and 1000=Water
Cordyceps should also plot raw values in order to see if values are stable.
In raw mode, values are send in Hz, in normal mode, its send as permil.
TDT-Commands:
* Raw
* Calibrate dry
* Calibrate water
* change sensor
4 soil moisture Sensors can be connected to the board.
The sensors can be evaluated one after the other.
With shrinking hose on the sensors, the values look quite stable.
Each sensor needs it calibration according to the type and cable.
Air- and Water-Values are needed.
The reported value is promil; 0=Air and 1000=Water
Cordyceps should also plot raw values in order to see if values are stable.
In raw mode, values are send in Hz, in normal mode, its send as permil.
TDT-Commands:
* Raw
* Calibrate dry
* Calibrate water
* change sensor