Wiki » Historie » Version 5
Maximilian Seesslen, 11.04.2024 18:37
| 1 | 1 | Maximilian Seesslen | h1. Wiki |
|---|---|---|---|
| 2 | |||
| 3 | 4 soil moisture Sensors can be connected to the board. |
||
| 4 | The sensors can be evaluated one after the other. |
||
| 5 | |||
| 6 | With shrinking hose on the sensors, the values look quite stable. |
||
| 7 | Each sensor needs it calibration according to the type and cable. |
||
| 8 | 3 | Maximilian Seesslen | Air- and Water-Values are needed. |
| 9 | The reported value is promil; 0=Air and 1000=Water |
||
| 10 | 1 | Maximilian Seesslen | |
| 11 | 4 | Maximilian Seesslen | Cordyceps should also plot raw values in order to see if values are stable. |
| 12 | 5 | Maximilian Seesslen | In raw mode, values are send in Hz, in normal mode, its send as permil. |
| 13 | 4 | Maximilian Seesslen | |
| 14 | |||
| 15 | 1 | Maximilian Seesslen | TDT-Commands: |
| 16 | 2 | Maximilian Seesslen | * Raw |
| 17 | * Calibrate dry |
||
| 18 | * Calibrate water |
||
| 19 | * change sensor |