Eval » Historie » Revision 2
Revision 1 (Redmine Admin, 01.12.2021 18:56) → Revision 2/15 (Redmine Admin, 02.12.2021 13:54)
h1. Eval
* FPC 10p cable for CANIO/Miniminutnik
* Buchsenleiste TX/RX/POW
* Boot/Reset button; gross button
* 4Pin I2C-JST-Stecker
* TX/RX-LEDs (from adapter)
* Power-LED
* Target-LED
* Micro-USB
* Aussparung FPC-Stecker-Verrigelung
* 1mm Acryl
* MCP2221
* LDO 3V
* Schiebeschalter: I2C Power 5V/3V
* Schiebeschalter: power target
VUsb must have bypass capacitor between 0.22 and 0.47 μF.
When using internal LDO, GPIO and UART signals are 5V. We dont want this-> extern LDO
* FPC 10p cable for CANIO/Miniminutnik
* Buchsenleiste TX/RX/POW
* Boot/Reset button; gross button
* 4Pin I2C-JST-Stecker
* TX/RX-LEDs (from adapter)
* Power-LED
* Target-LED
* Micro-USB
* Aussparung FPC-Stecker-Verrigelung
* 1mm Acryl
* MCP2221
* LDO 3V
* Schiebeschalter: I2C Power 5V/3V
* Schiebeschalter: power target
VUsb must have bypass capacitor between 0.22 and 0.47 μF.
When using internal LDO, GPIO and UART signals are 5V. We dont want this-> extern LDO