Eval » Historie » Version 10
Maximilian Seesslen, 20.11.2023 19:23
| 1 | 1 | Maximilian Seesslen | h1. Eval |
|---|---|---|---|
| 2 | |||
| 3 | Weisswurstthermometer; mainly power supply; |
||
| 4 | |||
| 5 | e.g. Have thermometer at work |
||
| 6 | |||
| 7 | 10 | Maximilian Seesslen | ** Thermocouple-Interface 2* |
| 8 | 1 | Maximilian Seesslen | ** Loud buzzer |
| 9 | ** USB interface for charging |
||
| 10 | *** Circtuit from Minutnik-eInk |
||
| 11 | ** Switch-On/Off button |
||
| 12 | ** Auto off |
||
| 13 | ** Should run a week |
||
| 14 | 10 | Maximilian Seesslen | ** Power CANBus |
| 15 | 1 | Maximilian Seesslen | |
| 16 | How much current draws CANDis? single 18650 cell ok? ca. 3000mAh. 3,6V. 7,1V |
||
| 17 | 2 | Maximilian Seesslen | |
| 18 | 5 | Maximilian Seesslen | h2. Compare |
| 19 | |||
| 20 | 7 | Maximilian Seesslen | * Trelock LS760: 3,7V; 3000 mAh |
| 21 | 5 | Maximilian Seesslen | |
| 22 | 2 | Maximilian Seesslen | h2. Charger IC |
| 23 | |||
| 24 | * billigst: TP4056; nur 1 Zelle; bzw. MCP73832 |
||
| 25 | * Schutz: DW01A |
||
| 26 | 3 | Maximilian Seesslen | * MCP73844-840IMS; 2 Zellen, kein Balancer |
| 27 | 6 | Maximilian Seesslen | |
| 28 | BQ40Z50: balancer; 2-4 cells, circuit a little bit complicated; Protection only |
||
| 29 | BQ40Z80: balancer; 2-6 cells; circuit a little bit complicated |
||
| 30 | BQ4050: 1-4 cells; Protection only |
||
| 31 | 8 | Maximilian Seesslen | ISL78714; Up to 14 cells on one chip; NDA for full datasheet |
| 32 | 6 | Maximilian Seesslen | BQ24753A: no balancing |
| 33 | bq24735: no balancing |
||
| 34 | BQ7693002DBT |
||
| 35 | 9 | Maximilian Seesslen | |
| 36 | BQ25887: Charge and ballance 2 cells only. |