Software » miniminutnik

h1. EEPROM

The STM32L011x4 has 512Bytes EEPROM

Campo spezifies 0x20 bytes of HWData, 0x20 Bytes of Board specific stuff, and 2*0x20 config data.

Page size (erase size) of EEPROM is 4 bytes.

Retain block is 8 Bytes, so still 0x18 Bytes for I2C-EEPROM-compatible layout.

h2. Variant/Flags from HW-Data

|_.Bits |_.Description                                          |

| 0..3  | used MCU: 0=STM32L011x4                               |

| 4..7  | model: 0=regular Miniminutnik, 1=Corona airing timer  |

h2. Board-Data

|_.Offset |_.Size |_.Description               |

| 0x0     | 1     | MCU                        |

| 0x1     | 1     | Number of leds available   |

| 0x2     | 1     | Housing Variant            |

h2. Configurating

|_.Offset |_.Size |_.Description                  |

| 0x0     | 1     | Mode                          |

| 0x1     | 1     | Number of slots               |

| 0x2     | 1     | Sound                         |

| 0x3     | 1     | Reserved                      |

| 0x4     | 2     | Slot 1: Time in sec(espresso) |

| 0x6     | 2     | Slot 2: Time (Egg)            |

| 0x8     | 2     | Slot 3: Time (Weisswurst)     |

| 0xA     | 2     | Slot 4: Time (Nudeln 1)       |

| 0xC     | 2     | Slot 5: Time (Nudeln 2)       |

| 0xE     | 2     | Slot 6: -                     |

| 0x10    | 4     | long time 1 depending on mode |

| 0x14    | 4     | long time 2 depending on mode |

| 0x18    | -     |                               |

4 bytes gives a range > 24h.