Projekt

Allgemein

Profil

Eval » Historie » Version 27

Redmine Admin, 13.12.2021 13:56

1 1 Redmine Admin
h1. Eval
2
3 6 Redmine Admin
h2. V2
4 7 Redmine Admin
5 8 Redmine Admin
-New version with I2C EEPROM?- Oh wait, there is an internal EEPROM.
6 9 Redmine Admin
-Uart not even neccessary. Fancy GDB-Magic can be used.
7 10 Redmine Admin
At the moment its probably an STM32L011F4P6.- Uart for configuring is needed. "Customer" should be able to configure it with adapter via USB.
8 3 Redmine Admin
So UART would be nice then. Assume its already wired correctly.
9 4 Redmine Admin
10 25 Redmine Admin
An adapter for UART to USB would be nice. So able to configure it without STLink. MCP2221 looks good. "Ophio":http://hase.seesslen.net/redmine/projects/ophio
11 16 Redmine Admin
12 12 Redmine Admin
STM32L031F6P6 has 32KB.January 2022; 2,22920€ @ 25pc. EEPROM is also integrated. Pin-kompability to be checked.
13 14 Redmine Admin
STM32L031F6P7 is 2,38520€ @ 25pc. 717 available. "Link":https://www.digikey.de/de/products/detail/stmicroelectronics/STM32F042F6P6/5268189
14 15 Maximilian Seesslen
Pins are the same, Uart is on the same pins. Buzzer same, SWD same.
15 6 Redmine Admin
16 18 Redmine Admin
UART works as expected (STM32L011). Binary Size is still ok (Release only, Debug not possible).
17 19 Maximilian Seesslen
STerm is way to big (4K over size). Have to look whats the issue there. Faking a 64K Version, making full debug image and check symbol sizes.
18 24 Redmine Admin
19
h2. Battery life
20
21
"Unterschwelleneffekt":https://de.wikipedia.org/wiki/Unterschwelleneffekt / leakage current
22
23
Buzzer is now driven by MOSFET. The "Zero Gate Voltage Drain Current" is relevant for battery life in unused status.
24
"Nexpedia":https://assets.nexperia.com/documents/user-manual/Nexperia_document_book_MOSFETGaNFETApplicationHandbook_2020.pdf
25
Most manufactures specify an "Zero Gate Voltage Drain Current" of 1µA at 20-30V. Temperature has an big impact.
26
27
Vergleichen mit verwendetem Transistor;
28
"NPN":https://www.reichelt.de/bipolartransistor-npn-45-v-0-5-a-0-225-w-sot-23-bcx-19-smd-p90184.html (3.2.2019)
29
IE scheint 0, ICB ist mit 100nA angegeben
30
31
Einfach Messen... ist sowieso ein guter Geraete-Test
32
33 20 Maximilian Seesslen
150-280mAh, Panasonic: 220mAh
34 1 Redmine Admin
5-9h bei 30mA
35 21 Maximilian Seesslen
36 1 Redmine Admin
Buzzer:
37
3/(16+22)=80mA (permanent)-> 40mA; 5,5h
38
3 / (16 + 51) = 45mA -> 22,5mA; 9,7h
39 26 Redmine Admin
40
h2. Power Range
41
42
The MCU STM32L031x4 runs with 1.65V to 3.6V. "Battery1":https://docs.rs-online.com/fae6/A700000008139582.pdf "Battery2":https://docs.rs-online.com/01fa/0900766b817143bf.pdf specify a capacity of 235mAh to 2.0 volts
43
LEDs should be visible at  2Volts. VGS@2.0V should bring ID of 6A.
44 27 Redmine Admin
45
The white LED probably has to be replaced