Description » Historie » Version 6
Maximilian Seesslen, 21.04.2022 13:31
| 1 | 1 | Maximilian Seesslen | h1. Description |
|---|---|---|---|
| 2 | |||
| 3 | 5 | Maximilian Seesslen | The "mainSwitch" is the main total off button. |
| 4 | The PCB supplies the CANbus with integrated power supply (from 240V). |
||
| 5 | 2 | Maximilian Seesslen | When device is in off-state, it is isolated from 240V via SSR. |
| 6 | 1 | Maximilian Seesslen | To switch it to "on", it has an big button. The device contains an battery. |
| 7 | 2 | Maximilian Seesslen | |
| 8 | 5 | Maximilian Seesslen | It has terminal for USB slots to load mobile devices. It can power up to 5W(1A@5V). |
| 9 | 2 | Maximilian Seesslen | |
| 10 | Pressing the button again will bring device in "off" state. |
||
| 11 | The battery voltage is monitored. Low voltage gets detected and indicated by |
||
| 12 | 6 | Maximilian Seesslen | the LED or Buzzer. |
| 13 | 3 | Maximilian Seesslen | |
| 14 | The device has an CAN interface. It can be switched to off-mode by CAN message. |
||
| 15 | 4 | Maximilian Seesslen | |
| 16 | 6 | Maximilian Seesslen | The PCB is designed to be mounted into an box. There are no controls directly |
| 17 | 4 | Maximilian Seesslen | on the board. |