Roadmap » Historie » Version 65
Maximilian Seesslen, 15.09.2023 15:15
| 1 | 1 | Redmine Admin | h1. Roadmap |
|---|---|---|---|
| 2 | |||
| 3 | h2. Ongoing |
||
| 4 | |||
| 5 | 48 | Maximilian Seesslen | * Minutnik eInk |
| 6 | 52 | Maximilian Seesslen | * Lightswitch; (clock in bath) |
| 7 | 1 | Redmine Admin | * Kastella (i need plants) |
| 8 | * Candis-L, large Display. |
||
| 9 | 45 | Maximilian Seesslen | |
| 10 | 1 | Redmine Admin | h2. To be started |
| 11 | |||
| 12 | 18 | Redmine Admin | * Lichtwecker |
| 13 | 43 | Maximilian Seesslen | ** -CANIO-L- CANSwitch + CANDis |
| 14 | 56 | Maximilian Seesslen | ** I think i made current controllers. Check needed heat sinks for LEDs. Check LED mounting. |
| 15 | 58 | Maximilian Seesslen | ** Bottons |
| 16 | *** Confirm (Env-Alarm, Time-Alarm) |
||
| 17 | *** |
||
| 18 | 1 | Redmine Admin | * Canbridge |
| 19 | 63 | Maximilian Seesslen | * -Meteor; The BME680 has an accurracy of 0.5°C typical. So an additional more precice temperature sensor would be nice- |
| 20 | ** -ordered TMP117, +-0.1°C at –20°C to 50°C; total operation range: –55°C to 150°C- |
||
| 21 | 20 | Redmine Admin | * CANSpeaker; I have these bigger smd speakers. CANDisplay is not very loud. |
| 22 | 57 | Maximilian Seesslen | ** Can give alarm when temperature is > 20°C. But needs an Button then. |
| 23 | ** Wecker with RTC. |
||
| 24 | ** Involved in Lichtwecker? |
||
| 25 | 1 | Redmine Admin | * Bathroom clock; "Myse":/redmine/projects/myse |
| 26 | 53 | Maximilian Seesslen | * Fridgetemp |
| 27 | 1 | Redmine Admin | * "IMU":https://www.digikey.de/de/products/detail/tdk-invensense/IIM-42652/13901975 |
| 28 | * Comet PCB ersatz |
||
| 29 | 65 | Maximilian Seesslen | * Weisswurstthermometer; Rufa |
| 30 | 61 | Maximilian Seesslen | ** Couple-Interface |
| 31 | 1 | Redmine Admin | ** Loud buzzer |
| 32 | ** USB interface for charging |
||
| 33 | 65 | Maximilian Seesslen | * Powerbank |
| 34 | ** fuer CANDis? |
||
| 35 | ** Powerline-Free CANBus |
||
| 36 | ** Rufa |
||
| 37 | ** Garmin |
||
| 38 | ** 5V |
||
| 39 | ** Scaleable, 1-4 Zellen |
||
| 40 | |||
| 41 | 61 | Maximilian Seesslen | |
| 42 | 1 | Redmine Admin | h2. (nearly) Finished |
| 43 | |||
| 44 | 60 | Maximilian Seesslen | * BME680 adapter |
| 45 | * CAN-Rec mit SD-Karte |
||
| 46 | 46 | Maximilian Seesslen | * MainSwitch; "MainSwitch":/redmine/projects/mainswitch |
| 47 | 1 | Redmine Admin | * Amp |
| 48 | * Miniminutnik |
||
| 49 | 29 | Maximilian Seesslen | ** -Further Miniminutniks; v0.2.x; UART works at least in debug mode.- |
| 50 | 1 | Redmine Admin | * CANIO (S) |
| 51 | * Temprec |
||
| 52 | * Slonce I |
||
| 53 | * Candisplay (i finally need light switches) |
||
| 54 | ** Test it on breadboard first |
||
| 55 | ** When it works: small cable adapter. |
||
| 56 | ** https://www.reichelt.de/dc-dc-wandler-am1p-z-1-w-5-v-200-ma-dil-8-sim1-0505s-dil8-p35039.html?search=sim1-0505 |
||
| 57 | ** https://www.reichelt.de/dc-dc-wandler-tea-1-1-w-4-5-5-5-5-0-vdc-sil-4-tea-1-0505-p288651.html |
||
| 58 | 42 | Maximilian Seesslen | * CANSwitch |
| 59 | |||
| 60 | 38 | Maximilian Seesslen | |
| 61 | h2. Dropped |
||
| 62 | |||
| 63 | * -CANIO L- |
||
| 64 | * -Lighttimer/Switchbox- |
||
| 65 | ** -CANIO-L- |
||
| 66 | * -Sensemux- |
||
| 67 | ** -verificate some stuff. CANSpeaker, Sensors, alarm-clock, plant-lamp- |
||
| 68 | * -CANControl, Is this really needed- |
||
| 69 | ** -Controller with RTC, automatic on/off of CANSwitches- |
||
| 70 | 1 | Redmine Admin | ** -Controlls Kastella- |
| 71 | 38 | Maximilian Seesslen | * -Isoler; small dc/dc adapter, 2 LEDs- |
| 72 | 46 | Maximilian Seesslen | * -Mini-Candis mit OLED-Display; was bringts mir ueberhaubt?- |