Roadmap » Historie » Revision 61
Revision 60 (Maximilian Seesslen, 14.02.2023 15:13) → Revision 61/66 (Maximilian Seesslen, 14.02.2023 15:28)
h1. Roadmap
h2. Ongoing
* Minutnik eInk
* Lightswitch; (clock in bath)
* Kastella (i need plants)
* Candis-L, large Display.
h2. To be started
* Lichtwecker
** -CANIO-L- CANSwitch + CANDis
** I think i made current controllers. Check needed heat sinks for LEDs. Check LED mounting.
** Bottons
*** Confirm (Env-Alarm, Time-Alarm)
***
* Canbridge
* Meteor; The BME680 has an accurracy of 0.5°C typical. So an additional more precice temperature sensor would be nice
** ordered TMP117, +-0.1°C at –20°C to 50°C; total operation range: –55°C to 150°C
* CANSpeaker; I have these bigger smd speakers. CANDisplay is not very loud.
** Can give alarm when temperature is > 20°C. But needs an Button then.
** Wecker with RTC.
** Involved in Lichtwecker?
* Bathroom clock; "Myse":/redmine/projects/myse
* Fridgetemp
* "IMU":https://www.digikey.de/de/products/detail/tdk-invensense/IIM-42652/13901975
* Comet PCB ersatz
* Weisswurstthermometer
** Couple-Interface
** Loud buzzer
** USB interface for charging
h2. (nearly) Finished
* BME680 adapter
* CAN-Rec mit SD-Karte
* MainSwitch; "MainSwitch":/redmine/projects/mainswitch
* Amp
* Miniminutnik
** -Further Miniminutniks; v0.2.x; UART works at least in debug mode.-
* CANIO (S)
* Temprec
* Slonce I
* Candisplay (i finally need light switches)
** Test it on breadboard first
** When it works: small cable adapter.
** https://www.reichelt.de/dc-dc-wandler-am1p-z-1-w-5-v-200-ma-dil-8-sim1-0505s-dil8-p35039.html?search=sim1-0505
** https://www.reichelt.de/dc-dc-wandler-tea-1-1-w-4-5-5-5-5-0-vdc-sil-4-tea-1-0505-p288651.html
* CANSwitch
h2. Dropped
* -CANIO L-
* -Lighttimer/Switchbox-
** -CANIO-L-
* -Sensemux-
** -verificate some stuff. CANSpeaker, Sensors, alarm-clock, plant-lamp-
* -CANControl, Is this really needed-
** -Controller with RTC, automatic on/off of CANSwitches-
** -Controlls Kastella-
* -Isoler; small dc/dc adapter, 2 LEDs-
* -Mini-Candis mit OLED-Display; was bringts mir ueberhaubt?-
h2. Ongoing
* Minutnik eInk
* Lightswitch; (clock in bath)
* Kastella (i need plants)
* Candis-L, large Display.
h2. To be started
* Lichtwecker
** -CANIO-L- CANSwitch + CANDis
** I think i made current controllers. Check needed heat sinks for LEDs. Check LED mounting.
** Bottons
*** Confirm (Env-Alarm, Time-Alarm)
***
* Canbridge
* Meteor; The BME680 has an accurracy of 0.5°C typical. So an additional more precice temperature sensor would be nice
** ordered TMP117, +-0.1°C at –20°C to 50°C; total operation range: –55°C to 150°C
* CANSpeaker; I have these bigger smd speakers. CANDisplay is not very loud.
** Can give alarm when temperature is > 20°C. But needs an Button then.
** Wecker with RTC.
** Involved in Lichtwecker?
* Bathroom clock; "Myse":/redmine/projects/myse
* Fridgetemp
* "IMU":https://www.digikey.de/de/products/detail/tdk-invensense/IIM-42652/13901975
* Comet PCB ersatz
* Weisswurstthermometer
** Couple-Interface
** Loud buzzer
** USB interface for charging
h2. (nearly) Finished
* BME680 adapter
* CAN-Rec mit SD-Karte
* MainSwitch; "MainSwitch":/redmine/projects/mainswitch
* Amp
* Miniminutnik
** -Further Miniminutniks; v0.2.x; UART works at least in debug mode.-
* CANIO (S)
* Temprec
* Slonce I
* Candisplay (i finally need light switches)
** Test it on breadboard first
** When it works: small cable adapter.
** https://www.reichelt.de/dc-dc-wandler-am1p-z-1-w-5-v-200-ma-dil-8-sim1-0505s-dil8-p35039.html?search=sim1-0505
** https://www.reichelt.de/dc-dc-wandler-tea-1-1-w-4-5-5-5-5-0-vdc-sil-4-tea-1-0505-p288651.html
* CANSwitch
h2. Dropped
* -CANIO L-
* -Lighttimer/Switchbox-
** -CANIO-L-
* -Sensemux-
** -verificate some stuff. CANSpeaker, Sensors, alarm-clock, plant-lamp-
* -CANControl, Is this really needed-
** -Controller with RTC, automatic on/off of CANSwitches-
** -Controlls Kastella-
* -Isoler; small dc/dc adapter, 2 LEDs-
* -Mini-Candis mit OLED-Display; was bringts mir ueberhaubt?-