Roadmap » Historie » Version 29
Maximilian Seesslen, 23.05.2022 15:36
| 1 | 1 | Redmine Admin | h1. Roadmap |
|---|---|---|---|
| 2 | |||
| 3 | h2. Ongoing |
||
| 4 | |||
| 5 | 29 | Maximilian Seesslen | * MainSwitch |
| 6 | * Miniminutnik eInk |
||
| 7 | 1 | Redmine Admin | * Kastella (i need plants) |
| 8 | 12 | Redmine Admin | |
| 9 | 1 | Redmine Admin | h2. To be started |
| 10 | |||
| 11 | 18 | Redmine Admin | * CANIO L |
| 12 | 1 | Redmine Admin | * Lighttimer/Switchbox |
| 13 | ** CANIO-L |
||
| 14 | 18 | Redmine Admin | * Lichtwecker |
| 15 | 24 | Maximilian Seesslen | ** -CANIO-L- CANSwitch |
| 16 | 1 | Redmine Admin | * Canbridge |
| 17 | 10 | Redmine Admin | * Meteor; The BME680 has an accurracy of 0.5°C typical. So an additional more precice temperature sensor would be nice |
| 18 | 2 | Redmine Admin | ** ordered TMP117, +-0.1°C at –20°C to 50°C; total operation range: –55°C to 150°C |
| 19 | * CANSpeaker; I have these bigger smd speakers. CANDisplay is not very loud. |
||
| 20 | 19 | Redmine Admin | * Sensemux |
| 21 | ** verificate some stuff. CANSpeaker, Sensors, alarm-clock, plant-lamp |
||
| 22 | 20 | Redmine Admin | * eInk Minutnik |
| 23 | 1 | Redmine Admin | ** WSH-12561; 37,32x31,8; |
| 24 | 20 | Redmine Admin | ** AKKU 31063 (Garmin Fenix 3) 300mAh; 300 mAh; 31,6 x 24,8 x 4,3 |
| 25 | 22 | Redmine Admin | ** Pixel-data is 5KB ((200*200)/8); need bigger MCU; but the STM32L433CCU6 i have is too much |
| 26 | 27 | Maximilian Seesslen | ** STM32L151C6U6A waers eigentlich. USB, -128KB Flash, 32KB SRAM, EEPROM- 32KB Flash, 10KB RAM, hat USB |
| 27 | 25 | Maximilian Seesslen | ** STM32L051C8T6; no USB |
| 28 | 26 | Maximilian Seesslen | * CANControl, Is this really needed |
| 29 | ** Controller with RTC, automatic on/off of CANSwitches |
||
| 30 | 1 | Redmine Admin | ** Controlls Kastella |
| 31 | 26 | Maximilian Seesslen | * Bathroom clock |
| 32 | 28 | Maximilian Seesslen | |
| 33 | 1 | Redmine Admin | h2. (nearly) Finished |
| 34 | |||
| 35 | * Amp |
||
| 36 | * Miniminutnik |
||
| 37 | 29 | Maximilian Seesslen | ** -Further Miniminutniks; v0.2.x; UART works at least in debug mode.- |
| 38 | 1 | Redmine Admin | * CANIO (S) |
| 39 | * Temprec |
||
| 40 | 18 | Redmine Admin | * Slonce I |
| 41 | 29 | Maximilian Seesslen | * Candisplay (i finally need light switches) |
| 42 | * -Isoler; small dc/dc adapter, 2 LEDs- |
||
| 43 | ** Test it on breadboard first |
||
| 44 | ** When it works: small cable adapter. |
||
| 45 | ** https://www.reichelt.de/dc-dc-wandler-am1p-z-1-w-5-v-200-ma-dil-8-sim1-0505s-dil8-p35039.html?search=sim1-0505 |
||
| 46 | ** https://www.reichelt.de/dc-dc-wandler-tea-1-1-w-4-5-5-5-5-0-vdc-sil-4-tea-1-0505-p288651.html |