Roadmap » Historie » Revision 10
Revision 9 (Redmine Admin, 29.11.2021 14:44) → Revision 10/66 (Redmine Admin, 29.11.2021 14:51)
h1. Roadmap
h2. Ongoing
* Further Miniminutniks; v0.0.2; UART works at lesat in debug mode.
* Candisplay (i finally need light switches)
* Kastella (i need plants)
* Isoler; small dc/dc adapter, 2 LEDs
** Test it on breadboard first
h2. To be started
* USB UART adapter +I2C; debug interface; to configure miniminutnik
* Lighttimer/Switchbox
* Lichtwecker
* Canbridge
* Meteor; The BME680 has an accurracy of 0.5°C typical. So an additional more precice temperature sensor would be nice
** ordered TMP117, +-0.1°C at –20°C to 50°C; total operation range: –55°C to 150°C
* CANSpeaker; I have these bigger smd speakers. CANDisplay is not very loud.
h2. Finished
* Amp
* Miniminutnik
h2. Ongoing
* Further Miniminutniks; v0.0.2; UART works at lesat in debug mode.
* Candisplay (i finally need light switches)
* Kastella (i need plants)
* Isoler; small dc/dc adapter, 2 LEDs
** Test it on breadboard first
h2. To be started
* USB UART adapter +I2C; debug interface; to configure miniminutnik
* Lighttimer/Switchbox
* Lichtwecker
* Canbridge
* Meteor; The BME680 has an accurracy of 0.5°C typical. So an additional more precice temperature sensor would be nice
** ordered TMP117, +-0.1°C at –20°C to 50°C; total operation range: –55°C to 150°C
* CANSpeaker; I have these bigger smd speakers. CANDisplay is not very loud.
h2. Finished
* Amp
* Miniminutnik