Go 12V » Historie » Version 2
Maximilian Seesslen, 09.10.2025 11:10
| 1 | 1 | Maximilian Seesslen | h1. Go 12V |
|---|---|---|---|
| 2 | |||
| 3 | The 5V line already dropped to 4,7V in good condition. I had big problems with |
||
| 4 | * sensemux |
||
| 5 | * CANDis displays got resetted on bad conditions |
||
| 6 | * Not sure if other issues have been related to poor voltage |
||
| 7 | * maybe need higher voltages in the future for bigger displays |
||
| 8 | |||
| 9 | 24V would be nice but some CAN transceivers can only toleryte CAN-Hi/Low up to 14V. |
||
| 10 | Hard to find voltage regulators from 12V to 3V. |
||
| 11 | Is there one that can handle both 12V and 5V? -> CANDis |
||
| 12 | 2 | Maximilian Seesslen | |
| 13 | MCP1754: max. 17,4V; 300mV dropout |